- ubuntu12.04环境下使用kvm ioctl接口实现最简单的虚拟机
- Ubuntu 通过无线网络安装Ubuntu Server启动系统后连接无线网络的方法
- 在Ubuntu上搭建网桥的方法
- ubuntu 虚拟机上网方式及相关配置详解
CFSDN坚持开源创造价值,我们致力于搭建一个资源共享平台,让每一个IT人在这里找到属于你的精彩世界.
这篇CFSDN的博客文章linux线程的取消(终止)方法由作者收集整理,如果你对这篇文章有兴趣,记得点赞哟.
关键:
pthread_cancel函数发送终止信号 pthread_setcancelstate函数设置终止方式 pthread_testcancel函数取消线程(另一功能是:设置取消点) 。
1 线程取消的定义 。
一般情况下,线程在其主体函数退出的时候会自动终止,但同时也可以因为接收到另一个线程发来的终止(取消)请求而强制终止.
2 线程取消的语义 。
线程取消的方法是向目标线程发Cancel信号(pthread_cancel函数发送Cancel信号),但如何处理Cancel信号则由目标线程自己决定,或者忽略、或者立即终止、或者继续运行至Cancelation-point(取消点),由不同的Cancelation状态(pthread_setcancelstate函数设置状态)决定.
线程接收到CANCEL信号的缺省处理(即pthread_create()创建线程的缺省状态)是继续运行至取消点,也就是说设置一个CANCELED状态,线程继续运行,只有运行至Cancelation-point的时候才会退出.
3 取消点 。
根据POSIX标准,pthread_join()、pthread_testcancel()、pthread_cond_wait()、 pthread_cond_timedwait()、sem_wait()、sigwait()等函数以及read()、write()等会引起阻塞的系统调用都是Cancelation-point,而其他pthread函数都不会引起Cancelation动作。但是pthread_cancel的手册页声称,由于LinuxThread库与C库结合得不好,因而目前C库函数都不是Cancelation-point;但CANCEL信号会使线程从阻塞的系统调用中退出,并置EINTR错误码,因此可以在需要作为Cancelation-point的系统调用前后调用 pthread_testcancel(),从而达到POSIX标准所要求的目标,即如下代码段:
pthread_testcancel(); retcode = read(fd, buffer, length); pthread_testcancel(),
4 程序设计方面的考虑 。
如果线程处于无限循环中,且循环体内没有执行至取消点的必然路径,则线程无法由外部其他线程的取消请求而终止。因此在这样的循环体的必经路径上应该加入pthread_testcancel()调用.
5 与线程取消相关的pthread函数 。
int pthread_cancel(pthread_t thread) 。
发送终止信号给thread线程,如果成功则返回0,否则为非0值。发送成功并不意味着thread会终止.
int pthread_setcancelstate(int state, int *oldstate) 。
设置本线程对Cancel信号的反应,state有两种值:PTHREAD_CANCEL_ENABLE(缺省)和 PTHREAD_CANCEL_DISABLE,分别表示收到信号后设为CANCLED状态和忽略CANCEL信号继续运行;old_state如果不为 NULL则存入原来的Cancel状态以便恢复.
int pthread_setcanceltype(int type, int *oldtype) 。
设置本线程取消动作的执行时机,type由两种取值:PTHREAD_CANCEL_DEFFERED和 PTHREAD_CANCEL_ASYCHRONOUS,仅当Cancel状态为Enable时有效,分别表示收到信号后继续运行至下一个取消点再退出和立即执行取消动作(退出);oldtype如果不为NULL则存入运来的取消动作类型值.
void pthread_testcancel(void) 。
功能一:设置取消点; 。
功能二:检查本线程是否处于Canceld状态,如果是,则进行取消动作,否则直接返回.
代码:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
|
#include <
stdio.h
>
#include <
errno.h
>
#include <
unistd.h
>
#include <
stdlib.h
>
#include <
pthread.h
>
#define THREAD_MAX 4
pthread_mutex_t mutex;
pthread_t thread[THREAD_MAX];
static int tries;
static int started;
void print_it(int *arg)
{
pthread_t tid;
tid = pthread_self();
printf("Thread %lx was canceled on its %d try.\n",tid,*arg);
}
void *Search_Num(int arg)
{
pthread_t tid;
int num;
int k=0,h=0,j;
int ntries;
tid = pthread_self();
/*while(pthread_mutex_trylock(&mutex) == EBUSY)
{
printf("**************busy****************\n");
pthread_testcancel();
}*/
srand(arg);
num = rand()&0xFFFFFF;
//pthread_mutex_unlock(&mutex);
printf("thread num %lx\n",tid);
ntries = 0;
pthread_setcancelstate(PTHREAD_CANCEL_ENABLE,NULL);
pthread_setcanceltype(PTHREAD_CANCEL_DEFERRED,NULL);
pthread_cleanup_push((void *)print_it,(void *)&ntries);
while(1)
{
num = (num+1)&0xffffff;
ntries++;
if(arg == num)
{
//只允许一个线程操作此处
while(pthread_mutex_trylock(&mutex) == EBUSY) {
//一个线程操作后其余线程进入次循环挂起,等待pthread_cancel函数发送cancel信号终止线程
k++;
if(k == 10000)
{
printf("----------2busy2-----------\n");
}
pthread_testcancel();
}
tries = ntries;
//pthread_mutex_unlock(&mutex); //如果加上这句话,将会有好几个线程找到主函数中设定的值pid
printf("Thread %lx found the number!\n",tid);
for(j = 0;j<THREAD_MAX;j++)
{
if(thread[j]!=tid)
{
pthread_cancel(thread[j]);
}
}
break;
}
if(ntries%100 == 0)
{
h++;
/*线程阻塞,其他线程争夺资源,或者是等待pthread_cancel函数发送cancel信号终止线程*/
pthread_testcancel();
/*这是为了弄明白pthread_testcancel函数的作用而设置的代码段*/
if(h == 10000)
{
h = 0;
printf("----------thread num %lx-------------\n",tid);
}
}
}
pthread_cleanup_pop(0);
return (void *)0;
}
int main()
{
int i,pid;
pid = getpid(); //设置要查找的数
pthread_mutex_init(&mutex,NULL);
printf("Search the num of %d\n",pid);
for(started = 0; started < THREAD_MAX; started++)
{
pthread_create(&thread[started],NULL,(void *)Search_Num,(void *)pid);
}
for(i = 0; i < THREAD_MAX; i++)
{
printf("-----------i = %d--------------\n",i);
pthread_join(thread[i],NULL);
}
printf("It took %d tries ot find the number!\n",tries);
return 0;
}
|
运行结果:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
|
Search the num of 6531
-----------i = 0--------------
thread num b6fbcb70
thread num b67bbb70
thread num b5fbab70
thread num b77bdb70
----------thread num b67bbb70-------------
Thread b67bbb70 found the number!
----------thread num b6fbcb70-------------
----------thread num b77bdb70-------------
----------2busy2-----------
----------thread num b5fbab70-------------
----------2busy2-----------
Thread b5fbab70 was canceled on its 1174527 try.
Thread b77bdb70 was canceled on its 1023100 try.
-----------i = 1--------------
Thread b6fbcb70 was canceled on its 1174527 try.
-----------i = 2--------------
-----------i = 3--------------
It took 1174527 tries ot find the number!
|
从这结果里你有没有看出什么呢?呵呵~.~ 。
以上就是小编为大家带来的linux线程的取消(终止)方法全部内容了,希望大家多多支持我~ 。
最后此篇关于linux线程的取消(终止)方法的文章就讲到这里了,如果你想了解更多关于linux线程的取消(终止)方法的内容请搜索CFSDN的文章或继续浏览相关文章,希望大家以后支持我的博客! 。
我将 Bootstrap 与 css 和 java 脚本结合使用。在不影响前端代码的情况下,我真的很难在css中绘制这个背景。在许多问题中,人们将宽度和高度设置为 0%。但是由于我的导航栏,我不能使用
我正在用 c 编写一个程序来读取文件的内容。代码如下: #include void main() { char line[90]; while(scanf("%79[^\
我想使用 javascript 获取矩阵数组的所有对 Angular 线。假设输入输出如下: input = [ [1,2,3], [4,5,6], [7,8,9], ] output =
可以用pdfmake绘制lines,circles和other shapes吗?如果是,是否有documentation或样本?我想用jsPDF替换pdfmake。 最佳答案 是的,有可能。 pdfm
我有一个小svg小部件,其目的是显示角度列表(参见图片)。 现在,角度是线元素,仅具有笔触,没有填充。但是现在我想使用一种“内部填充”颜色和一种“笔触/边框”颜色。我猜想line元素不能解决这个问题,
我正在为带有三角对象的 3D 场景编写一个非常基本的光线转换器,一切都工作正常,直到我决定尝试从场景原点 (0/0/0) 以外的点转换光线。 但是,当我将光线原点更改为 (0/1/0) 时,相交测试突
这个问题已经有答案了: Why do people write "#!/usr/bin/env python" on the first line of a Python script? (22 个回
如何使用大约 50 个星号 * 并使用 for 循环绘制一条水平线?当我尝试这样做时,结果是垂直(而不是水平)列出 50 个星号。 public void drawAstline() { f
这是一个让球以对角线方式下降的 UI,但球保持静止;线程似乎无法正常工作。你能告诉我如何让球移动吗? 请下载一个球并更改目录,以便程序可以找到您的球的分配位置。没有必要下载足球场,但如果您愿意,也可以
我在我的一个项目中使用 Jmeter 和 Ant,当我们生成报告时,它会在报告中显示 URL、#Samples、失败、成功率、平均时间、最短时间、最长时间。 我也想在报告中包含 90% 的时间线。 现
我有一个不寻常的问题,希望有人能帮助我。我想用 Canvas (android) 画一条 Swing 或波浪线,但我不知道该怎么做。它将成为蝌蚪的尾部,所以理想情况下我希望它的形状更像三角形,一端更大
这个问题已经有答案了: Checking Collision of Shapes with JavaFX (1 个回答) 已关闭 8 年前。 我正在使用 JavaFx 8 库。 我的任务很简单:我想检
如何按编号的百分比拆分文件。行数? 假设我想将我的文件分成 3 个部分(60%/20%/20% 部分),我可以手动执行此操作,-_-: $ wc -l brown.txt 57339 brown.tx
我正在努力实现这样的目标: 但这就是我设法做到的。 你能帮我实现预期的结果吗? 更新: 如果我删除 bootstrap.css 依赖项,问题就会消失。我怎样才能让它与 Bootstrap 一起工作?
我目前正在构建一个网站,但遇到了 transform: scale 的问题。我有一个按钮,当用户将鼠标悬停在它上面时,会发生两件事: 背景以对 Angular 线“扫过” 按钮标签颜色改变 按钮稍微变
我需要使用直线和仿射变换绘制大量数据点的图形(缩放图形以适合 View )。 目前,我正在使用 NSBezierPath,但我认为它效率很低(因为点在绘制之前被复制到贝塞尔路径)。通过将我的数据切割成
我正在使用基于 SVM 分类的 HOG 特征检测器。我可以成功提取车牌,但提取的车牌除了车牌号外还有一些不必要的像素/线。我的图像处理流程如下: 在灰度图像上应用 HOG 检测器 裁剪检测到的区域 调
我有以下图片: 我想填充它的轮廓(即我想在这张图片中填充线条)。 我尝试了形态学闭合,但使用大小为 3x3 的矩形内核和 10 迭代并没有填满整个边界。我还尝试了一个 21x21 内核和 1 迭代,但
我必须找到一种算法,可以找到两组数组之间的交集总数,而其中一个数组已排序。 举个例子,我们有这两个数组,我们向相应的数字画直线。 这两个数组为我们提供了总共 7 个交集。 有什么样的算法可以帮助我解决
简单地说 - 我想使用透视投影从近裁剪平面绘制一条射线/线到远裁剪平面。我有我认为是使用各种 OpenGL/图形编程指南中描述的方法通过单击鼠标生成的正确标准化的世界坐标。 我遇到的问题是我的光线似乎
我是一名优秀的程序员,十分优秀!