CFSDN坚持开源创造价值，我们致力于搭建一个资源共享平台，让每一个IT人在这里找到属于你的精彩世界.

这篇CFSDN的博客文章Linux内核增加HDF驱动子系统由作者收集整理，如果你对这篇文章有兴趣，记得点赞哟.

前言

HDF驱动子系统是OpenHarmony重要的特色功能之一，其主要的功能是实现驱动程序在多内核多平台的物联网环境，实现一次驱动开发，多端部署。之前移植OHOS3.0使用了传统的linux驱动，比较遗憾，今天尝试将HDF驱动子系统加入编译框架。开始前先了解几个名词.

HCS(HDF Configuration Source)是 HDF 驱动框架的配置描述源码，JSON存储.

HC-GEN(HDF Configuration Generator)是 HCS 配置转换工具，可以将 HDF 配置文件HCS转换为二进制HCB.

HCB(HDF Configuration Binary)二进制文件，驱动可使用 HDF 框架提供的配置解析接口获取配置.

内核打补丁

如何在内核加入HDF驱动，linux内核下主要实现是下面两个目录:

drivers\adapter\khdf\linux 和 drivers\framework 。

这两个目录是通过链接的方式加入到内核编译的，流程如下:

kernel\linux\build\kernel.mk：75 。

1. $(hide) cd $(KERNEL_SRC_TMP_PATH) && patch -p1 < $(HDF_PATCH_FILE) && patch -p1 < $(DEVICE_PATCH_FILE)

可以参考3516的HDF补丁：kernel\linux\patches\linux-5.10\hi3516dv300_patch\hdf.patch 。

1. patching file drivers/Kconfig
2. patching file drivers/Makefile
3. patching file drivers/hdf/Makefile
4. patching symbolic link drivers/hdf/framework
5. patching symbolic link drivers/hdf/khdf
6. patching symbolic link include/hdf
7.  
8. # 添加到linux内核的补丁
9. drivers/hdf/framework -> /drivers/framework/ # 驱动子系统驱动框架、配置管理、配置解析、驱动通用框架模型、硬件通用平台能力接口等
10. drivers/hdf/khdf -> /drivers/adapter/khdf/linux/ # 在linux内核中部署OpenHarmony驱动框架
11. drivers/hdf/Makefile # 由hdf.patch提供
12. include/hdf -> /drivers/framework/include/ # 驱动框架对外提供能力的头文件

内核配置

只是打上补丁还不行，还得在内核的编译配置文件中加入HDF选项。最开始的做法就是参考3516的配置选择，但是发现有些配置会导致编译失败。测试发现下面的配置是可以编译成功的.

1. [*] Enable HDF manager
2. (2) Set HDF support platform
3. [*] Enable HDF platform driver
4. [*] Enable HDF platform mipi dsi driver
5. [*] Enable HDF platform gpio driver
6. [*] Enable HDF platform i2c driver
7. [*] Enable HDF platform watchdog driver
8. [*] hi35xx pwm driver
9. [*] Enable HDF platform pwm driver
10. [*] Enable HDF platform uart driver
11. [ ] Enable HDF platform sdio driver
12. [ ] Enable HDF platform emmc driver
13. [*] Enable HDF platform mmc driver
14. [*] Enable HDF platform spi driver
15. [*] Enable HDF platform rtc driver
16. [*] Enable HDF linux test
17. [*] Enable HDF Display driver
18. [ ] Enable HDF Lcdkit driver
19. [*] Enable HDF Icn9700 driver
20. [ ] Enable HDF St7789 driver
21. [*] Enable HDF input driver
22. [*] Enable HDF tp 5P5 GT911 driver
23. [*] Enable HDF tp 2P35 FT6236 driver
24. [ ] Enable HDF wifi
25. [ ] Enable HDF Bluetooth
26. [*] Enable HDF sensor driver
27. [ ] Enable HDF accel sensor driver
28. [ ] Enable HDF gyro sensor driver
29. [ ] Enable HDF barometer sensor driver
30. [ ] Enable HDF hall sensor driver
31. [*] Enable HDF storage driver
32. [ ] Enable HDF USB PNP Notify driver
33. [ ] Enable F_GENERIC driver
34. [ ] Enable HDF Audio driver
35. [*] Enable HDF vibrator driver
36. [*] Enable HDF linear vibrator driver
37. [ ] Enable HDF dsoftbus driver
38.  
39. CONFIG_DRIVERS_HDF=y
40. CONFIG_HDF_SUPPORT_LEVEL=2
41. CONFIG_DRIVERS_HDF_PLATFORM=y
42. CONFIG_DRIVERS_HDF_PLATFORM_MIPI_DSI=y
43. CONFIG_DRIVERS_HDF_PLATFORM_GPIO=y
44. CONFIG_DRIVERS_HDF_PLATFORM_I2C=y
45. CONFIG_DRIVERS_HDF_PLATFORM_WATCHDOG=y
46. CONFIG_PWM_HI35XX=y
47. CONFIG_DRIVERS_HDF_PLATFORM_PWM=y
48. CONFIG_DRIVERS_HDF_PLATFORM_UART=y
49. # CONFIG_DRIVERS_HDF_PLATFORM_SDIO is not set
50. # CONFIG_DRIVERS_HDF_PLATFORM_EMMC is not set
51. CONFIG_DRIVERS_HDF_PLATFORM_MMC=y
52. CONFIG_DRIVERS_HDF_PLATFORM_SPI=y
53. CONFIG_DRIVERS_HDF_PLATFORM_RTC=y
54. CONFIG_DRIVERS_HDF_TEST=y
55. CONFIG_DRIVERS_HDF_DISP=y
56. # CONFIG_DRIVERS_HDF_LCDKIT is not set
57. CONFIG_DRIVERS_HDF_LCD_ICN9700=y
58. # CONFIG_DRIVERS_HDF_LCD_ST7789 is not set
59. CONFIG_DRIVERS_HDF_INPUT=y
60. CONFIG_DRIVERS_HDF_TP_5P5_GT911=y
61. CONFIG_DRIVERS_HDF_TP_2P35_FT6236=y
62. # CONFIG_DRIVERS_HDF_WIFI is not set
63. # CONFIG_DRIVERS_HDF_BT is not set
64. CONFIG_DRIVERS_HDF_SENSOR=y
65. # CONFIG_DRIVERS_HDF_SENSOR_ACCEL is not set
66. # CONFIG_DRIVERS_HDF_SENSOR_GYRO is not set
67. # CONFIG_DRIVERS_HDF_SENSOR_BAROMETER is not set
68. # CONFIG_DRIVERS_HDF_SENSOR_HALL is not set
69. CONFIG_DRIVERS_HDF_STORAGE=y
70. # CONFIG_DRIVERS_HDF_USB_PNP_NOTIFY is not set
71. # CONFIG_DRIVERS_HDF_USB_F_GENERIC is not set
72. # CONFIG_DRIVERS_HDF_AUDIO is not set
73. CONFIG_DRIVERS_HDF_VIBRATOR=y
74. CONFIG_DRIVERS_HDF_VIBRATOR_LINEAR=y
75. # CONFIG_DRIVERS_HDF_DSOFTBUS is not set
76. # end of Device Drivers

[*] Enable HDF linux test 是需要设置的，如果没有设置CONFIG_DRIVERS_HDF_TEST，目录结构就出问题了，会报这样的错误.

1. drivers/hdf/khdf/Makefile:22: PRODUCT_PATH=vendor/raspberrypi/RPI4B
2. scripts/Makefile.build:44: drivers/hdf/khdf/../../../../vendor/raspberrypi/RPI4B/hdf_config/Makefile: No such file or directory
3. make[5]: *** No rule to make target 'drivers/hdf/khdf/../../../../vendor/raspberrypi/RPI4B/hdf_config/Makefile'. Stop.
4. CC [M] drivers/net/wireless/mac80211_hwsim.o
5. make[4]: *** [scripts/Makefile.build:497: drivers/hdf/khdf/../../../../vendor/raspberrypi/RPI4B/hdf_config] Error 2
6. make[3]: *** [scripts/Makefile.build:497: drivers/hdf/khdf] Error 2
7. make[2]: *** [scripts/Makefile.build:497: drivers/hdf] Error 2
8. make[2]: *** Waiting for unfinished jobs....

下面3个选项要关闭，不然会报下面的错误.

[ ] Enable HDF platform sdio driver 。

[ ] Enable HDF platform emmc driver 。

[ ] Enable HDF wifi 。

1. drivers/../../../../../../drivers/adapter/khdf/linux/platform/sdio/sdio_adapter.o: In function `Hi35xxLinuxSdioRescan':
2. sdio_adapter.c:(.text+0x20): undefined reference to `hisi_sdio_rescan'
3. sdio_adapter.c:(.text+0x34): undefined reference to `himci_get_mmc_host'
4. drivers/../../../../../../drivers/adapter/khdf/linux/platform/sdio/sdio_adapter.o: In function `Hi35xxLinuxSdioFindFunc':
5. sdio_adapter.c:(.text+0xc84): undefined reference to `himci_get_mmc_host'
6. sdio_adapter.c:(.text+0xc9c): undefined reference to `himci_get_mmc_host'
7. sdio_adapter.c:(.text+0xcb4): undefined reference to `himci_get_mmc_host'
8. drivers/../../../../../../drivers/adapter/khdf/linux/platform/emmc/emmc_adapter.o: In function `Hi35xxLinuxEmmcBind':
9. emmc_adapter.c:(.text+0x214): undefined reference to `himci_get_mmc_host'
10. drivers/../../../../../../device/hisilicon/drivers/wifi/driver/hi3881/oal/oal_sdio_host.o: In function `sdio_card_detect_change':
11. oal_sdio_host.c:(.text+0x2ce8): undefined reference to `hisi_sdio_rescan'
12. make[1]: *** [Makefile:1179: vmlinux] Error 1
13. make[1]: Leaving directory '/home/liangzili/ohos/out/KERNEL_OBJ/kernel/src_tmp/linux-5.10'
14. make: *** [kernel.mk:80: /home/liangzili/ohos/out/KERNEL_OBJ/kernel/src_tmp/linux-5.10/arch/arm/boot/zImage] Error 2
15. ninja: build stopped: subcommand failed.

编译过程

为了方便测试可以单独进行内核编译，比如我的编译命令是这样的.

1. ./build.sh --product-name RPI4B --ccache --build-target raspberrypi_products

可以分析下HDF这部分的编译过程.

linux-5.10\drivers\hdf\Makefile，hdf.patch会添加这个Makefile，将khdf文件夹加入编译.

1. obj-$(CONFIG_DRIVERS_HDF) += khdf/

linux-5.10\drivers\hdf\khdf\Makefile 。

1. export HDF_ROOT := drivers/hdf
2. obj-$(CONFIG_DRIVERS_HDF) += osal/
3. obj-$(CONFIG_DRIVERS_HDF) += network/
4. obj-$(CONFIG_DRIVERS_HDF) += config/
5.  
6. SUPPORT_LEVEL_STD_H := $(shell [ "$(CONFIG_HDF_SUPPORT_LEVEL)" -ge 2 ] && echo true)
7.  
8. $(warning PRODUCT_PATH=$(PRODUCT_PATH)) # 会检查PRODUCT_PATH变量
9. ifeq ($(PRODUCT_PATH),)
10. $(error PRODUCT_PATH not)
11. endif
12.  
13. # 这里有条注释指明了*.hcs配置文件的存放路径
14. # for L2+, hcs config should in vendor/product_company/product_name/config/khdf
15. ifeq ($(SUPPORT_LEVEL_STD_H), true)
16. SUB_DIR:=khdf/
17. endif
18.  
19. # HDF test的配置会使hcs目录结构不一样，我当时没有设置CONFIG_DRIVERS_HDF_TEST就掉这个坑里了。
20. ifeq ($(CONFIG_DRIVERS_HDF), y)
21. ifeq ($(CONFIG_DRIVERS_HDF_TEST), y)
22. obj-$(CONFIG_DRIVERS_HDF) += ../../../../$(PRODUCT_PATH)/hdf_config/$(SUB_DIR)/hdf_test/
23. obj-$(CONFIG_DRIVERS_HDF) += test/
24. else
25. obj-$(CONFIG_DRIVERS_HDF) += ../../../../$(PRODUCT_PATH)/hdf_config/$(SUB_DIR)
26. endif
27. endif
28. # ... 后面按照配置添加一些编译目录 ...

drivers\adapter\khdf\linux\Makefile：会调用 obj-(CONFIG_DRIVERS_HDF) += ../../../../(CONFIGDRIVERSHDF)+=../../../../(PRODUCT_PATH)/hdf_config/$(SUB_DIR)/hdf_test/ 这是OHOS3.0默认的HCS文件存放路径。官方的注释也说明了，所以将设备对应的*.hcs存放到 vendor\raspberrypi\RPI4B\hdf_config\khdf 文件夹，参考 3516 的 vendor\hisilicon\Hi3516DV300\hdf_config\khdf\hdf.hcs 就可了.

1. #include "device_info/device_info.hcs"
2. #include "platform/i2c_config.hcs"
3. #include "platform/hi35xx_watchdog_config.hcs"
4. #include "platform/hi35xx_pwm_config.hcs"
5. #include "platform/hi35xx_uart_config.hcs"
6. #include "platform/sdio_config.hcs"
7. #include "platform/emmc_config.hcs"
8. #include "platform/hi35xx_spi_config.hcs"
9. #include "input/input_config.hcs"
10. #include "wifi/wlan_platform.hcs"
11. #include "wifi/wlan_chip_hi3881.hcs"
12. #include "sensor/sensor_config.hcs"
13. #include "audio/audio_config.hcs"
14. #include "audio/codec_config.hcs"
15. #include "audio/dai_config.hcs"
16. #include "audio/dma_config.hcs"
17. #include "audio/dsp_config.hcs"
18. #include "vibrator/vibrator_config.hcs"
19. #include "vibrator/linear_vibrator_config.hcs"
20. #include "lcd/lcd_config.hcs"
21.  
22. root {
23. module = "hisilicon,hi35xx_chip";
24. }

参考 3516 的 vendor\hisilicon\Hi3516DV300\hdf_config\khdf\Makefile 。

其中：PRODUCT_PATH环境变量的来源：kernel/linux/build/kernel_module_build.sh:42:export PRODUCT_PATH=$4 。

1. ifeq ($(LOCAL_HCS_ROOT),)
2. LOCAL_HCS_ROOT := $(PRODUCT_PATH)
3. endif
4.  
5. SOURCE_ROOT:=$(abspath ../../../../../)
6.  
7. HC_GEN_DIR := $(abspath $(SOURCE_ROOT)/drivers/framework/tools/hc-gen)
8. HC_GEN := $(HC_GEN_DIR)/build/hc-gen
9. LOCAL_HCS_ROOT := $(abspath $(dir $(realpath $(lastword $(MAKEFILE_LIST)))))
10.  
11. HCS_DIR := $(LOCAL_HCS_ROOT)
12.  
13. ifneq ($(TARGET_BOARD_PLATFORM),)
14. HCS_DIR := $(LOCAL_HCS_ROOT)/$(TARGET_BOARD_PLATFORM)
15. else
16. ifneq ($(CONFIG_ARCH_HI3516DV300),)
17. HCS_DIR := $(LOCAL_HCS_ROOT)
18. endif
19. ifneq ($(CONFIG_ARCH_HI3518EV300),)
20. HCS_DIR := $(LOCAL_HCS_ROOT)
21. endif
22. endif
23. $(info HCS_DIR = $(HCS_DIR))
24. HCB_FLAGS := -b -i -a
25.  
26. HCS_OBJ := hdf_hcs_hex.o
27. HCS_OBJ_SRC := $(subst .o,.c,$(notdir $(HCS_OBJ)))
28.  
29. CONFIG_GEN_HEX_SRC := $(addprefix $(LOCAL_HCS_ROOT)/, $(HCS_OBJ_SRC))
30. CONFIG_HCS_SRC := $(subst _hcs_hex.o,.hcs,$(addprefix $(HCS_DIR)/, $(HCS_OBJ)))
31.  
32. $(obj)/$(HCS_OBJ): $(CONFIG_GEN_HEX_SRC)
33. $(Q)$(CC) $(c_flags) -c -o $@ $<
34. $(Q)rm -f $<
35.  
36. $(CONFIG_GEN_HEX_SRC): $(LOCAL_HCS_ROOT)/%_hcs_hex.c: $(HCS_DIR)/%.hcs | $(HC_GEN)
37. $(Q)echo gen hdf built-in config
38. $(Q)if [ ! -d $(dir $@) ]; then mkdir -p $(dir $@); fi
39. $(Q)$(HC_GEN) $(HCB_FLAGS) -o $(subst _hex.c,,$(@)) $<
40.  
41. $(CONFIG_GEN_SRCS): $(CONFIG_OUT_DIR)%.c: $(HCS_DIR)/%.hcs | $(HC_GEN)
42. $(Q)echo gen hdf driver config
43. $(Q)if [ ! -d $(dir $@) ]; then mkdir -p $(dir $@); fi
44. $(Q)$(HC_GEN) -t -o $@ $<
45.  
46. $(HC_GEN):
47. $(HIDE)make -C $(HC_GEN_DIR)
48.  
49. obj-$(CONFIG_DRIVERS_HDF) += $(HCS_OBJ)

查看结果

编译完成后，可以上传内核镜像到开发板，来查看HDF驱动框架是否启动成功.

加入HDF前:

1. # ls dev/
2. __parameters__ hwrng tty1 tty28 tty46 tty7
3. __trigger__ input tty10 tty29 tty47 tty8
4. autofs kmsg tty11 tty3 tty48 tty9
5. binder linux,cma tty12 tty30 tty49 ttyAMA0
6. block loop-control tty13 tty31 tty5 ttyS0
7. bus mem tty14 tty32 tty50 ttyprintk
8. cachefiles memcg tty15 tty33 tty51 unix
9. char null tty16 tty34 tty52 urandom
10. console port tty17 tty35 tty53 vchiq
11. cpuctl ptmx tty18 tty36 tty54 vcs
12. cpuset pts tty19 tty37 tty55 vcs1
13. dri random tty2 tty38 tty56 vcsa
14. fd rawctl tty20 tty39 tty57 vcsa1
15. freezer snd tty21 tty4 tty58 vcsu
16. fscklogs stderr tty22 tty40 tty59 vcsu1
17. full stdin tty23 tty41 tty6 vga_arbiter
18. gpiochip0 stdout tty24 tty42 tty60 vndbinder
19. gpiochip1 system tty25 tty43 tty61 watchdog
20. graphics tty tty26 tty44 tty62 watchdog0
21. hwbinder tty0 tty27 tty45 tty63 zero

加入HDF后:

1. # ls dev/
2. HDF_PLATFORM_I2C_MANAGER loop-control tty24 tty54
3. HDF_PLATFORM_UART_1 mem tty25 tty55
4. HDF_TEST memcg tty26 tty56
5. I2C_TEST null tty27 tty57
6. __parameters__ port tty28 tty58
7. __trigger__ ptmx tty29 tty59
8. autofs pts tty3 tty6
9. binder random tty30 tty60
10. block rawctl tty31 tty61
11. bus sample_service tty32 tty62
12. cachefiles snd tty33 tty63
13. char stderr tty34 tty7
14. console stdin tty35 tty8
15. cpuctl stdout tty36 tty9
16. cpuset system tty37 ttyAMA0
17. dev_mgr tty tty38 ttyS0
18. dri tty0 tty39 ttyprintk
19. fd tty1 tty4 unix
20. freezer tty10 tty40 urandom
21. fscklogs tty11 tty41 vchiq
22. full tty12 tty42 vcs
23. gpiochip0 tty13 tty43 vcs1
24. gpiochip1 tty14 tty44 vcsa
25. graphics tty15 tty45 vcsa1
26. hdf_bl tty16 tty46 vcsu
27. hdf_input_host tty17 tty47 vcsu1
28. hdf_misc_vibrator tty18 tty48 vga_arbiter
29. hdf_sensor_manager_ap tty19 tty49 vndbinder
30. hwbinder tty2 tty5 watchdog
31. hwrng tty20 tty50 watchdog0
32. input tty21 tty51 zero
33. kmsg tty22 tty52
34. linux,cma tty23 tty53

基本算是启动成功了，接下来考虑打算用HDF的方式添加一下设备。来验证HDF驱动框架是否运转正常.

原文链接：https://harmonyos.51cto.com 。

最后此篇关于Linux内核增加HDF驱动子系统的文章就讲到这里了,如果你想了解更多关于Linux内核增加HDF驱动子系统的内容请搜索CFSDN的文章或继续浏览相关文章，希望大家以后支持我的博客！ 。