- ubuntu12.04环境下使用kvm ioctl接口实现最简单的虚拟机
- Ubuntu 通过无线网络安装Ubuntu Server启动系统后连接无线网络的方法
- 在Ubuntu上搭建网桥的方法
- ubuntu 虚拟机上网方式及相关配置详解
CFSDN坚持开源创造价值,我们致力于搭建一个资源共享平台,让每一个IT人在这里找到属于你的精彩世界.
这篇CFSDN的博客文章浅析 Kubelet 驱逐机制由作者收集整理,如果你对这篇文章有兴趣,记得点赞哟.
。
Kubelet 出于对节点的保护,允许在节点资源不足的情况下,开启对节点上 Pod 进行驱逐的功能。最近对 Kubelet 的驱逐机制有所研究,发现其中有很多值得学习的地方,总结下来和大家分享.
Kubelet 的驱逐功能需要在配置中打开,并且配置驱逐的阈值。Kubelet 的配置中与驱逐相关的参数如下:
其中,EvictionHard 表示硬驱逐,一旦达到阈值,就直接驱逐;EvictionSoft 表示软驱逐,即可以设置软驱逐周期,只有超过软驱逐周期后,才启动驱逐,周期用 EvictionSoftGracePeriod 设置;EvictionMinimumReclaim 表示设置最小可用的阈值,比如 imagefs.
可以设置的驱逐信号有:
Eviction Manager的主要工作在 synchronize 函数里。有两个地方触发 synchronize 任务,一个是 monitor 任务,每 10s 触发一次;另一个是根据用户配置的驱逐信号,启动的 notifier 任务,用来监听内核事件.
notifier 由 eviction manager 中的 thresholdNotifier 启动,用户配置的每一个驱逐信号,都对应一个 thresholdNotifier,而 thresholdNotifier 和 notifier 通过 channel 通信,当 notifier 向 channel 中发送消息时,对应的 thresholdNotifier 便触发一次 synchronize 逻辑.
notifier 采用的是内核的 cgroups Memory thresholds,cgroups 允许用户态进程通过 eventfd 来设置当 memory.usage_in_bytes 达到某阈值时,内核给应用发送通知。具体做法是向 cgroup.event_control 写入 " ".
notifier 的初始化代码如下(为了方便阅读,删除了部分不相干代码),主要是找到 memory.usage_in_bytes 的文件描述符 watchfd,cgroup.event_control 的文件描述符 controlfd,完成 cgroup memory thrsholds 的注册.
notifier 在启动时还会通过 epoll 来监听上述的 eventfd,当监听到内核发送的事件时,说明使用的内存已超过阈值,便向 channel 中发送信号.
synchronize 逻辑每次执行都会判断 10s 内 notifier 是否有更新,并重新启动 notifier。cgroup memory threshold 的计算方式为内存总量减去用户设置的驱逐阈值.
Eviction Manager 的主逻辑 synchronize 细节比较多,这里就不贴源码了,梳理下来主要是以下几个事项:
对 pod 的驱逐顺序主要取决于三个因素:
三个因素的判断顺序也是根据注册进 orderedBy 的顺序。这里 orderedBy 函数的多级排序也是 Kubernetes 里一个值得学习(抄作业)的一个实现,感兴趣的读者可以自行查阅源码.
接下来就是驱逐 Pod 的实现。Eviction Manager 驱逐 Pod 就是干净利落的 kill,里面具体的实现这里不展开分析,值得注意的是在驱逐之前有一个判断,如果 IsCriticalPod 返回为 true 则不驱逐.
再看看 IsCriticalPod 的代码:
从代码看,如果 Pod 是 Static、Mirror、Critical Pod 都不驱逐。其中 Static 和 Mirror 都是从 Pod 的 annotation 中判断;而 Critical 则是通过 Pod 的 Priority 值判断的,如果 Priority 为 system-cluster-critical/system-node-critical 都属于 Critical Pod.
不过这里值得注意的是,官方文档里提及 Critical Pod 是说,如果非 Static Pod 被标记为 Critical,并不完全保证不会被驱逐:https://kubernetes.io/docs/tasks/administer-cluster/guaranteed-scheduling-critical-addon-pods 。因此,很有可能是社区并没有想清楚这种情况是否要驱逐,并不排除后面会改变这段逻辑,不过也有可能是文档没有及时更新??.
本文主要分析了 Kubelet 的 Eviction Manager,包括其对 Linux CGroup 事件的监听、判断 Pod 驱逐的优先级等。了解了这些之后,我们就可以根据自身应用的重要性来设置优先级,甚至设置成 Critical Pod.
原文链接:https://mp.weixin.qq.com/s/xEE-GoYg0b6aeMHHar7qWw 。
最后此篇关于浅析 Kubelet 驱逐机制的文章就讲到这里了,如果你想了解更多关于浅析 Kubelet 驱逐机制的内容请搜索CFSDN的文章或继续浏览相关文章,希望大家以后支持我的博客! 。
我正在尝试 enable a FlexVolume driver在 Ubuntu 上的 Microk8s 上。 为此,我似乎必须编辑 kubelet.service 文件。这应该存储在/etc/sys
我正在裸机 Debian 上运行 kubernetes(目前有 3 个 master、2 个worker、PoC)。我按照 k8s-the-hard-way 进行操作,但在 kubelet 上遇到了以
cgroup driver的配置在/etc/systemd/system/kubelet.service.d/10-kubeadm.conf Environment="KUBELET_CGROUP_A
环境: Kubernetes 1.12.2 Docker 18.9.0 microk8s.kubectl $ k 得到所有 NAME
Kubernetes 的节点可以按照节点的资源容量进行调度,默认情况下 Pod 能够使用节点全部可用容量。这样就会造成一个问题,因为节点自己通常运行了不少驱动 OS 和 Kubernetes 的
在运行 kubectl get nodes 等命令时出现以下错误: 与服务器 :6443 的连接被拒绝 - 您是否指定了正确的主机或端口? 我运行了 systemctl status kubelet.
我在 AWS 上安装了一堆新的 CentOS 服务器。服务 kubelet 尝试启动会污染日志文件(var/log/messages),但由于我没有用它,我想将其删除。这是 CentOS 的一个可选组
我在 kubelet 删除 docker 图像时遇到问题,因为它认为磁盘已满: Dec 29 18:00:14 hostname kubelet: I1229 18:00:14.548513 13
我想知道kubelet如何与docker容器通信。此配置在哪里定义?我进行了很多搜索,但没有发现任何有用的信息。我正在使用https kube API服务器。我可以创建 pods ,但不会产生容器吗?
https://kubernetes.io/docs/tasks/administer-cluster/reconfigure-kubelet/嗨,我在学习本教程时遇到了一些麻烦。建议使用 confi
我的两个集群节点获得 Kubelet stopped posting node status在 kubectl describe node有时。在该节点的日志中,我看到了这一点: Dec 11 12:
我在某些 kubernetes 节点上的 CentO 上遇到了 OOM 问题。我想像他们在演示中那样设置它: --kube-reserved is set to cpu=1,memory=2Gi,ep
Kubelet 出于对节点的保护,允许在节点资源不足的情况下,开启对节点上 Pod 进行驱逐的功能。最近对 Kubelet 的驱逐机制有所研究,发现其中有很多值得学习的地方,总结下来
如果我运行 systemctl restart kubelet它会影响其他正在运行的节点吗?它会停止集群吗?你能预见任何影响吗? 任何帮助,将不胜感激! 最佳答案 在回答之前,小声明:重启不是由于对
我正在尝试在 fedora 24/lxc 容器上启动 kubelet,但收到一个似乎与 libvirt/iptables 相关的错误 Docker(使用 dnf/yum 安装): [root@node
我尝试使用 堆叠我的 kubeadm 集群三 大师。我从我的 init 命令收到这个问题... [kubelet-check] Initial timeout of 40s passed. Unfor
我在我的 Ubuntu 机器上安装了 Kubernetes。出于某些调试目的,我需要查看 kubelet 日志文件(如果有任何此类文件)。 我看过 /var/logs但我找不到这样的文件。那可能在哪里
平台:OEL 7.7 + kube 1.15.5 + docker 19.03.1 我们正在使用容器化 kubelet 方法在 k8s 上构建一个纠删码对象存储。我们很难提出可行的磁盘生命周期方法。就
我有一个来自 kubelet 的奇怪行为,在集群启动后不久 kubelet 没有注册到 API 服务器。 有趣的是,如果我重新启动 kubelet 守护程序,它会正确注册并且一切都按预期工作,这让我相
我只想知道你们中的任何人以前是否曾经听过本教程并获得成功。 我不知道为什么,但是每当我在MINION端重新启动并启用服务时,它总是失败,并显示错误“kubelet.service的依赖项作业失败”,当
我是一名优秀的程序员,十分优秀!