- 使用 Spring Initializr 创建 Spring Boot 应用程序
- 在Spring Boot中配置Cassandra
- 在 Spring Boot 上配置 Tomcat 连接池
- 将Camel消息路由到嵌入WildFly的Artemis上
本文整理了Java中java.time.ZonedDateTime.minusDays()
方法的一些代码示例,展示了ZonedDateTime.minusDays()
的具体用法。这些代码示例主要来源于Github
/Stackoverflow
/Maven
等平台,是从一些精选项目中提取出来的代码,具有较强的参考意义,能在一定程度帮忙到你。ZonedDateTime.minusDays()
方法的具体详情如下:
包路径:java.time.ZonedDateTime
类名称:ZonedDateTime
方法名:minusDays
[英]Returns a copy of this ZonedDateTime with the specified period in days subtracted.
This operates on the local time-line, LocalDateTime#minusDays(long) to the local date-time. This is then converted back to a ZonedDateTime, using the zone ID to obtain the offset.
When converting back to ZonedDateTime, if the local date-time is in an overlap, then the offset will be retained if possible, otherwise the earlier offset will be used. If in a gap, the local date-time will be adjusted forward by the length of the gap.
This instance is immutable and unaffected by this method call.
[中]返回此ZoneDateTime的副本,并减去指定的期间(以天为单位)。
这在本地时间线上运行,本地日期时间#小于本地日期时间的天数(长)。然后将其转换回ZoneDateTime,使用分区ID获取偏移量。
当转换回ZoneDateTime时,如果本地日期时间重叠,那么如果可能,将保留偏移量,否则将使用较早的偏移量。如果存在间隙,本地日期时间将根据间隙的长度向前调整。
此实例是不可变的,不受此方法调用的影响。
代码示例来源:origin: apache/geode
@Test
public void startAndEndDateCanIncludeLogs() throws Exception {
ZonedDateTime now = LocalDateTime.now().atZone(ZoneId.systemDefault());
ZonedDateTime yesterday = now.minusDays(1);
ZonedDateTime tomorrow = now.plusDays(1);
DateTimeFormatter dateTimeFormatter = DateTimeFormatter.ofPattern(ONLY_DATE_FORMAT);
CommandStringBuilder commandStringBuilder = new CommandStringBuilder("export logs");
commandStringBuilder.addOption("start-time", dateTimeFormatter.format(yesterday));
commandStringBuilder.addOption("end-time", dateTimeFormatter.format(tomorrow));
commandStringBuilder.addOption("log-level", "debug");
gfshConnector.executeAndAssertThat(commandStringBuilder.toString()).statusIsSuccess();
Set<String> acceptedLogLevels = Stream.of("info", "error", "debug").collect(toSet());
verifyZipFileContents(acceptedLogLevels);
}
代码示例来源:origin: apache/geode
@Test
public void testExportWithStartAndEndDateTimeFiltering() throws Exception {
ZonedDateTime cutoffTime = LocalDateTime.now().atZone(ZoneId.systemDefault());
// wait for atleast 1 second to reduce flakiness on windows
// on windows the flakiness is caused due to the cutoffTime
// being same as the log message logged on server1.
Thread.sleep(1);
String messageAfterCutoffTime =
"[this message should not show up since it is after cutoffTime]";
LogLine logLineAfterCutoffTime = new LogLine(messageAfterCutoffTime, "info", true);
server1.invoke(() -> {
Logger logger = LogService.getLogger();
logLineAfterCutoffTime.writeLog(logger);
});
DateTimeFormatter dateTimeFormatter = DateTimeFormatter.ofPattern(FORMAT);
String cutoffTimeString = dateTimeFormatter.format(cutoffTime);
CommandStringBuilder commandStringBuilder = new CommandStringBuilder("export logs");
commandStringBuilder.addOption("start-time", dateTimeFormatter.format(cutoffTime.minusDays(1)));
commandStringBuilder.addOption("end-time", cutoffTimeString);
commandStringBuilder.addOption("log-level", "debug");
gfshConnector.executeAndAssertThat(commandStringBuilder.toString()).statusIsSuccess();
expectedMessages.get(server1).add(logLineAfterCutoffTime);
Set<String> acceptedLogLevels = Stream.of("info", "error", "debug").collect(toSet());
verifyZipFileContents(acceptedLogLevels);
}
代码示例来源:origin: org.elasticsearch/elasticsearch
public ZonedDateTime minusDays(long amount) {
return dt.minusDays(amount);
}
代码示例来源:origin: spring-cloud/spring-cloud-gateway
@Bean
public RouteLocator testRouteLocator(RouteLocatorBuilder builder) {
return builder.routes()
.route("test_between_valid", r -> r.host("**.betweenvalid.org")
.and().between(ZonedDateTime.now().minusDays(1), ZonedDateTime.now().plusDays(1))
.filters(f -> f.prefixPath("/httpbin"))
.uri(uri))
.build();
}
}
代码示例来源:origin: prestodb/presto
@Override
public ConnectorSplitSource getSplits(ConnectorTransactionHandle transactionHandle, ConnectorSession session, ConnectorTableLayoutHandle layoutHandle, SplitSchedulingStrategy splitSchedulingStrategy)
{
AtopTableLayoutHandle handle = (AtopTableLayoutHandle) layoutHandle;
AtopTableHandle table = handle.getTableHandle();
List<ConnectorSplit> splits = new ArrayList<>();
ZonedDateTime end = ZonedDateTime.now(timeZone);
for (Node node : nodeManager.getWorkerNodes()) {
ZonedDateTime start = end.minusDays(maxHistoryDays - 1).withHour(0).withMinute(0).withSecond(0).withNano(0);
while (start.isBefore(end)) {
ZonedDateTime splitEnd = start.withHour(23).withMinute(59).withSecond(59).withNano(0);
Domain splitDomain = Domain.create(ValueSet.ofRanges(Range.range(TIMESTAMP_WITH_TIME_ZONE, 1000 * start.toEpochSecond(), true, 1000 * splitEnd.toEpochSecond(), true)), false);
if (handle.getStartTimeConstraint().overlaps(splitDomain) && handle.getEndTimeConstraint().overlaps(splitDomain)) {
splits.add(new AtopSplit(table.getTable(), node.getHostAndPort(), start.toEpochSecond(), start.getZone()));
}
start = start.plusDays(1).withHour(0).withMinute(0).withSecond(0).withNano(0);
}
}
return new FixedSplitSource(splits);
}
}
代码示例来源:origin: stackoverflow.com
ZonedDateTime now = ZonedDateTime.now();
ZonedDateTime oldDate = now.minusDays(1).minusMinutes(10);
Duration duration = Duration.between(oldDate, now);
System.out.println(duration.toDays());
代码示例来源:origin: stackoverflow.com
ZonedDateTime now = ZonedDateTime.now();
ZonedDateTime oldDate = now.minusDays(1).minusMinutes(10);
Duration duration = Duration.between(oldDate, now);
System.out.println("ISO-8601: " + duration);
System.out.println("Minutes: " + duration.toMinutes());
代码示例来源:origin: stackoverflow.com
Instant instant = Instant.now(); // In UTC.
ZoneId zoneId = ZoneId.of( "Asia/Kolkata" );
ZonedDateTime zdt = ZonedDateTime.ofInstant( instant , zoneId );
ZonedDateTime zdtTwentyFiveDaysAgo = zdt.minusDays( 25 );
代码示例来源:origin: stackoverflow.com
Instant now = Instant.now(); // UTC.
ZoneId zoneId = ZoneId.of( "America/Montreal" );
ZonedDateTime zdt = ZonedDateTime.ofInstant( instant , zoneId );
ZonedDateTime tenDaysAgo = zdt.minusDays( 10 );
代码示例来源:origin: UniversaBlockchain/universa
/**
* Get earliest possible creation time of a contract. Network will check if contract being registered was created after earliest time
* @return earliest creation time
*/
public ChronoZonedDateTime<?> getEarliestCreationTime() {
return ZonedDateTime.now().minusDays(10);
}
代码示例来源:origin: stackoverflow.com
public Instant getPreviousOccurence(LocalTime scheduledTime) {
Instant now = Instant.now();
ZonedDateTime todayAtScheduledTime = ZonedDateTime.ofInstant(now, EUROPE_PARIS).with(scheduledTime).withEarlierOffsetAtOverlap();
if (todayAtScheduledTime.toInstant().isAfter(now)) {
return todayAtScheduledTime.minusDays(1).withEarlierOffsetAtOverlap().toInstant();
} else {
return todayAtScheduledTime.toInstant();
}
}
代码示例来源:origin: stackoverflow.com
Instant then = yourJUDate.toInstant();
ZoneId zoneId = ZoneId.of( "America/Montreal" );
ZonedDateTime now = ZonedDateTime.now( zoneId );
ZonedDateTime oneDayAgo = now.minusDays( 1 );
Boolean within24Hours = ( ! then.isBefore( oneDayAgo ) ) && then.isBefore( now ) ;
代码示例来源:origin: sakaiproject/sakai
public ReportParams(String siteId){
this.siteId = siteId;
whatToolIds.add(ReportManager.WHAT_EVENTS_ALLTOOLS);
// events are counted against a particular date using the server time zone, so initialize the date
// range based on the current date in that time zone
ZonedDateTime today = ZonedDateTime.now(ZoneId.systemDefault()).truncatedTo(ChronoUnit.DAYS);
ZonedDateTime yesterday = today.minusDays(1);
whenFrom = Date.from(yesterday.toInstant());
whenTo = Date.from(today.toInstant());
}
代码示例来源:origin: stackoverflow.com
ZoneId zoneId = ZoneId.of ( "America/Montreal" );
ZonedDateTime now = ZonedDateTime.now ( zoneId );
ZonedDateTime then = now.minusDays ( 4 );
ZonedDateTime due = now.plusDays ( 3 );
Integer days = org.threeten.extra.Days.between ( then , due ).getAmount ();
代码示例来源:origin: UniversaBlockchain/universa
public List<Binder> getPaymentStats(Ledger ledger, int daysNum) {
List<Binder> result = new ArrayList<>();
ZonedDateTime now = ZonedDateTime.now();
Map<Integer, Integer> payments = ledger.getPayments(now.truncatedTo(ChronoUnit.DAYS).minusDays(daysNum));
payments.keySet().forEach( day -> {
result.add(Binder.of("date",ZonedDateTime.ofInstant(Instant.ofEpochSecond(day), ZoneId.systemDefault()).format(formatter), "units",payments.get(day)));
});
return result;
}
}
代码示例来源:origin: SonarSource/sonarlint-core
private static ZonedDateTime getLastNotificationTime(NotificationConfiguration config) {
ZonedDateTime lastTime = config.lastNotificationTime().get();
ZonedDateTime oneDayAgo = ZonedDateTime.now().minusDays(1);
return lastTime.isAfter(oneDayAgo) ? lastTime : oneDayAgo;
}
代码示例来源:origin: jzyong/game-server
public static long offsetCurrentTimeMillis(int offsetDays, int hour, int minute, int secord) {
ZonedDateTime ldt = ZonedDateTime.ofInstant(Instant.ofEpochMilli(currentTimeMillis()), ZoneId.systemDefault());
if (offsetDays > 0) {
ldt = ldt.plusDays(offsetDays);
} else if (offsetDays < 0) {
ldt = ldt.minusDays(offsetDays);
}
ldt = ldt.withHour(hour);
ldt = ldt.withMinute(minute);
ldt = ldt.withSecond(secord);
return ldt.toEpochSecond() * 1000;
}
代码示例来源:origin: org.meridor.perspective/perspective-mock
public static Instance getErrorInstance() {
Instance instance = getInstance();
instance.setCreated(now().minusDays(5));
instance.setTimestamp(now().minusDays(3));
instance.setId("error-instance");
instance.setName("error-instance");
instance.setState(InstanceState.ERROR);
return instance;
}
代码示例来源:origin: xetys/jhipster-uaa-setup
@Test
public void testFindNotActivatedUsersByCreationDateBefore() {
userService.removeNotActivatedUsers();
ZonedDateTime now = ZonedDateTime.now();
List<User> users = userRepository.findAllByActivatedIsFalseAndCreatedDateBefore(now.minusDays(3));
assertThat(users).isEmpty();
}
}
代码示例来源:origin: org.meridor.perspective/perspective-mock
public static Image getImage() {
Image image = new Image();
image.setId("test-image");
image.setRealId("test-image");
image.setProjectId(getProject().getId());
image.setName("test-image");
image.setState(ImageState.SAVED);
image.setCreated(now().minusDays(2));
image.setTimestamp(now().minusHours(4));
MetadataMap metadata = new MetadataMap();
image.setMetadata(metadata);
return image;
}
我尝试理解[c代码 -> 汇编]代码 void node::Check( data & _data1, vector& _data2) { -> push ebp -> mov ebp,esp ->
我需要在当前表单(代码)的上下文中运行文本文件中的代码。其中一项要求是让代码创建新控件并将其添加到当前窗体。 例如,在Form1.cs中: using System.Windows.Forms; ..
我有此 C++ 代码并将其转换为 C# (.net Framework 4) 代码。有没有人给我一些关于 malloc、free 和 sprintf 方法的提示? int monate = ee; d
我的网络服务器代码有问题 #include #include #include #include #include #include #include int
给定以下 html 代码,将列表中的第三个元素(即“美丽”一词)以斜体显示的 CSS 代码是什么?当然,我可以给这个元素一个 id 或一个 class,但 html 代码必须保持不变。谢谢
关闭。这个问题不符合Stack Overflow guidelines .它目前不接受答案。 我们不允许提问寻求书籍、工具、软件库等的推荐。您可以编辑问题,以便用事实和引用来回答。 关闭 7 年前。
我试图制作一个宏来避免重复代码和注释。 我试过这个: #define GrowOnPage(any Page, any Component) Component.Width := Page.Surfa
我正在尝试将我的旧 C++ 代码“翻译”成头条新闻所暗示的 C# 代码。问题是我是 C# 中的新手,并不是所有的东西都像 C++ 中那样。在 C++ 中这些解决方案运行良好,但在 C# 中只是不能。我
在 Windows 10 上工作,R 语言的格式化程序似乎没有在 Visual Studio Code 中完成它的工作。我试过R support for Visual Studio Code和 R-T
我正在处理一些报告(计数),我必须获取不同参数的计数。非常简单但乏味。 一个参数的示例查询: qCountsEmployee = ( "select count(*) from %s wher
最近几天我尝试从 d00m 调试网络错误。我开始用尽想法/线索,我希望其他 SO 用户拥有可能有用的宝贵经验。我希望能够提供所有相关信息,但我个人无法控制服务器环境。 整个事情始于用户注意到我们应用程
我有一个 app.js 文件,其中包含如下 dojo amd 模式代码: require(["dojo/dom", ..], function(dom){ dom.byId('someId').i
我对“-gencode”语句中的“code=sm_X”选项有点困惑。 一个例子:NVCC 编译器选项有什么作用 -gencode arch=compute_13,code=sm_13 嵌入库中? 只有
我为我的表格使用 X-editable 框架。 但是我有一些问题。 $(document).ready(function() { $('.access').editable({
我一直在通过本教程学习 flask/python http://blog.miguelgrinberg.com/post/the-flask-mega-tutorial-part-i-hello-wo
我想将 Vim 和 EMACS 用于 CNC、G 代码和 M 代码。 Vim 或 EMACS 是否有任何语法或模式来处理这种类型的代码? 最佳答案 一些快速搜索使我找到了 this vim 和 thi
关闭。这个问题不符合Stack Overflow guidelines .它目前不接受答案。 想改进这个问题?更新问题,使其成为 on-topic对于堆栈溢出。 7年前关闭。 Improve this
这个问题在这里已经有了答案: Enabling markdown highlighting in Vim (5 个回答) 6年前关闭。 当我在 Vim 中编辑包含 Markdown 代码的 READM
我正在 Swift3 iOS 中开发视频应用程序。基本上我必须将视频 Assets 和音频与淡入淡出效果合并为一个并将其保存到 iPhone 画廊。为此,我使用以下方法: private func d
pipeline { agent any stages { stage('Build') { steps { e
我是一名优秀的程序员,十分优秀!