- 使用 Spring Initializr 创建 Spring Boot 应用程序
- 在Spring Boot中配置Cassandra
- 在 Spring Boot 上配置 Tomcat 连接池
- 将Camel消息路由到嵌入WildFly的Artemis上
本文整理了Java中java.time.zone.ZoneRules.getTransition()
方法的一些代码示例,展示了ZoneRules.getTransition()
的具体用法。这些代码示例主要来源于Github
/Stackoverflow
/Maven
等平台,是从一些精选项目中提取出来的代码,具有较强的参考意义,能在一定程度帮忙到你。ZoneRules.getTransition()
方法的具体详情如下:
包路径:java.time.zone.ZoneRules
类名称:ZoneRules
方法名:getTransition
[英]Gets the offset transition applicable at the specified local date-time in these rules.
The mapping from a local date-time to an offset is not straightforward. There are three cases:
A transition is used to model the cases of a Gap or Overlap. The Normal case will return null.
There are various ways to handle the conversion from a LocalDateTime. One technique, using this method, would be:
ZoneOffsetTransition trans = rules.getTransition(localDT);
if (trans == null) {
// Gap or Overlap: determine what to do from transition
} else {
// Normal case: only one valid offset
zoneOffset = rule.getOffset(localDT);
}
[中]获取在这些规则中指定的本地日期时间适用的偏移量转换。
从本地日期时间到偏移量的映射并不简单。有三种情况:
*正常,有一个有效偏移。对于一年中的绝大多数时间,正常情况适用,当地日期和时间只有一个有效的偏移量。
*间隙,具有零有效偏移。这通常是由于春季夏令时从“冬季”变为“夏季”,时钟向前跳的时候。在间隙中,存在没有有效偏移的本地日期时间值。
*重叠,具有两个有效偏移。这是因为秋季夏令时从“夏季”变为“冬季”,时钟通常会被延迟。在重叠中,有两个有效偏移的本地日期时间值。
过渡用于模拟间隙或重叠的情况。正常情况下将返回null。
有多种方法可以处理LocalDateTime的转换。使用这种方法的一种技术是:
ZoneOffsetTransition trans = rules.getTransition(localDT);
if (trans == null) {
// Gap or Overlap: determine what to do from transition
} else {
// Normal case: only one valid offset
zoneOffset = rule.getOffset(localDT);
}
代码示例来源:origin: com.addthis/cronus
/**
* If there is no daylight savings time transition
* the ignore any effects of daylight savings and return
* the local output time.
*
* If there is a daylight savings time overlap transition
* (the clocks are set back) then select the time zone
* offset from before the transition.
*
* If there is a daylight saving time gap transition
* (the clocks are set forward) then we cannot use the local
* output time because it is not a legal time value.
* Move the event to the end of the transition.
*/
private ZonedDateTime outputAdjustDaylightSavings(LocalDateTime output, ZoneId zoneId) {
if (output == null) {
return null;
}
ZoneRules zoneRules = zoneId.getRules();
ZoneOffsetTransition transition = zoneRules.getTransition(output);
if (transition == null) {
return ZonedDateTime.of(output, zoneId);
} else if (transition.isOverlap()) {
return ZonedDateTime.ofInstant(output, transition.getOffsetBefore(), zoneId);
} else {
return ZonedDateTime.ofInstant(transition.getDateTimeAfter(), transition.getOffsetAfter(), zoneId);
}
}
代码示例来源:origin: com.github.seratch/java-time-backport
offset = validOffsets.get(0);
} else if (validOffsets.size() == 0) {
ZoneOffsetTransition trans = rules.getTransition(isoLDT);
localDateTime = localDateTime.plusSeconds(trans.getDuration().getSeconds());
offset = trans.getOffsetAfter();
代码示例来源:origin: com.github.seratch/java-time-backport
offset = validOffsets.get(0);
} else if (validOffsets.size() == 0) {
ZoneOffsetTransition trans = rules.getTransition(localDateTime);
localDateTime = localDateTime.plusSeconds(trans.getDuration().getSeconds());
offset = trans.getOffsetAfter();
代码示例来源:origin: com.github.seratch/java-time-backport
if (zone instanceof ZoneOffset == false) {
ZoneRules rules = zone.getRules();
ZoneOffsetTransition trans = rules.getTransition(ldt);
if (trans != null && trans.isGap()) {
ldt = trans.getDateTimeAfter();
代码示例来源:origin: com.addthis/cronus
/**
* If we are in the duplicated time period of an overlap transition,
* then move forwards around the duplicated time period.
*/
private ZonedDateTime inputDaylightSavingsNext(ZonedDateTime input) {
ZoneId zoneId = input.getZone();
ZoneRules zoneRules = zoneId.getRules();
ZoneOffset zoneOffset = input.getOffset();
LocalDateTime localDateTime = input.toLocalDateTime();
ZoneOffsetTransition transition = zoneRules.getTransition(localDateTime);
if (transition == null) {
return input;
} else if (zoneOffset.equals(transition.getOffsetAfter())) {
return ZonedDateTime.ofInstant(transition.getDateTimeBefore(),
transition.getOffsetAfter(), zoneId);
} else {
return input;
}
}
代码示例来源:origin: com.github.seratch/java-time-backport
@Override
public ChronoZonedDateTime<D> withEarlierOffsetAtOverlap() {
ZoneOffsetTransition trans = getZone().getRules().getTransition(LocalDateTime.from(this));
if (trans != null && trans.isOverlap()) {
ZoneOffset earlierOffset = trans.getOffsetBefore();
if (earlierOffset.equals(offset) == false) {
return new ChronoZonedDateTimeImpl<D>(dateTime, earlierOffset, zone);
}
}
return this;
}
代码示例来源:origin: com.github.seratch/java-time-backport
@Override
public ChronoZonedDateTime<D> withLaterOffsetAtOverlap() {
ZoneOffsetTransition trans = getZone().getRules().getTransition(LocalDateTime.from(this));
if (trans != null) {
ZoneOffset offset = trans.getOffsetAfter();
if (offset.equals(getOffset()) == false) {
return new ChronoZonedDateTimeImpl<D>(dateTime, offset, zone);
}
}
return this;
}
代码示例来源:origin: com.github.seratch/java-time-backport
/**
* Returns a copy of this date-time changing the zone offset to the
* earlier of the two valid offsets at a local time-line overlap.
* <p>
* This method only has any effect when the local time-line overlaps, such as
* at an autumn daylight savings cutover. In this scenario, there are two
* valid offsets for the local date-time. Calling this method will return
* a zoned date-time with the earlier of the two selected.
* <p>
* If this method is called when it is not an overlap, {@code this}
* is returned.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @return a {@code ZonedDateTime} based on this date-time with the earlier offset, not null
*/
@Override
public ZonedDateTime withEarlierOffsetAtOverlap() {
ZoneOffsetTransition trans = getZone().getRules().getTransition(dateTime);
if (trans != null && trans.isOverlap()) {
ZoneOffset earlierOffset = trans.getOffsetBefore();
if (earlierOffset.equals(offset) == false) {
return new ZonedDateTime(dateTime, earlierOffset, zone);
}
}
return this;
}
代码示例来源:origin: com.github.seratch/java-time-backport
/**
* Returns a copy of this date-time changing the zone offset to the
* later of the two valid offsets at a local time-line overlap.
* <p>
* This method only has any effect when the local time-line overlaps, such as
* at an autumn daylight savings cutover. In this scenario, there are two
* valid offsets for the local date-time. Calling this method will return
* a zoned date-time with the later of the two selected.
* <p>
* If this method is called when it is not an overlap, {@code this}
* is returned.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @return a {@code ZonedDateTime} based on this date-time with the later offset, not null
*/
@Override
public ZonedDateTime withLaterOffsetAtOverlap() {
ZoneOffsetTransition trans = getZone().getRules().getTransition(toLocalDateTime());
if (trans != null) {
ZoneOffset laterOffset = trans.getOffsetAfter();
if (laterOffset.equals(offset) == false) {
return new ZonedDateTime(dateTime, laterOffset, zone);
}
}
return this;
}
代码示例来源:origin: com.addthis/cronus
localDateTime = localDateTime.minusMinutes(1);
ZoneOffsetTransition transition = zoneRules.getTransition(localDateTime);
if (transition == null) {
return input;
代码示例来源:origin: com.github.seratch/java-time-backport
ZoneRules rules = zone.getRules();
if (rules.isValidOffset(localDateTime, offset) == false) {
ZoneOffsetTransition trans = rules.getTransition(localDateTime);
if (trans != null && trans.isGap()) {
我尝试理解[c代码 -> 汇编]代码 void node::Check( data & _data1, vector& _data2) { -> push ebp -> mov ebp,esp ->
我需要在当前表单(代码)的上下文中运行文本文件中的代码。其中一项要求是让代码创建新控件并将其添加到当前窗体。 例如,在Form1.cs中: using System.Windows.Forms; ..
我有此 C++ 代码并将其转换为 C# (.net Framework 4) 代码。有没有人给我一些关于 malloc、free 和 sprintf 方法的提示? int monate = ee; d
我的网络服务器代码有问题 #include #include #include #include #include #include #include int
给定以下 html 代码,将列表中的第三个元素(即“美丽”一词)以斜体显示的 CSS 代码是什么?当然,我可以给这个元素一个 id 或一个 class,但 html 代码必须保持不变。谢谢
关闭。这个问题不符合Stack Overflow guidelines .它目前不接受答案。 我们不允许提问寻求书籍、工具、软件库等的推荐。您可以编辑问题,以便用事实和引用来回答。 关闭 7 年前。
我试图制作一个宏来避免重复代码和注释。 我试过这个: #define GrowOnPage(any Page, any Component) Component.Width := Page.Surfa
我正在尝试将我的旧 C++ 代码“翻译”成头条新闻所暗示的 C# 代码。问题是我是 C# 中的新手,并不是所有的东西都像 C++ 中那样。在 C++ 中这些解决方案运行良好,但在 C# 中只是不能。我
在 Windows 10 上工作,R 语言的格式化程序似乎没有在 Visual Studio Code 中完成它的工作。我试过R support for Visual Studio Code和 R-T
我正在处理一些报告(计数),我必须获取不同参数的计数。非常简单但乏味。 一个参数的示例查询: qCountsEmployee = ( "select count(*) from %s wher
最近几天我尝试从 d00m 调试网络错误。我开始用尽想法/线索,我希望其他 SO 用户拥有可能有用的宝贵经验。我希望能够提供所有相关信息,但我个人无法控制服务器环境。 整个事情始于用户注意到我们应用程
我有一个 app.js 文件,其中包含如下 dojo amd 模式代码: require(["dojo/dom", ..], function(dom){ dom.byId('someId').i
我对“-gencode”语句中的“code=sm_X”选项有点困惑。 一个例子:NVCC 编译器选项有什么作用 -gencode arch=compute_13,code=sm_13 嵌入库中? 只有
我为我的表格使用 X-editable 框架。 但是我有一些问题。 $(document).ready(function() { $('.access').editable({
我一直在通过本教程学习 flask/python http://blog.miguelgrinberg.com/post/the-flask-mega-tutorial-part-i-hello-wo
我想将 Vim 和 EMACS 用于 CNC、G 代码和 M 代码。 Vim 或 EMACS 是否有任何语法或模式来处理这种类型的代码? 最佳答案 一些快速搜索使我找到了 this vim 和 thi
关闭。这个问题不符合Stack Overflow guidelines .它目前不接受答案。 想改进这个问题?更新问题,使其成为 on-topic对于堆栈溢出。 7年前关闭。 Improve this
这个问题在这里已经有了答案: Enabling markdown highlighting in Vim (5 个回答) 6年前关闭。 当我在 Vim 中编辑包含 Markdown 代码的 READM
我正在 Swift3 iOS 中开发视频应用程序。基本上我必须将视频 Assets 和音频与淡入淡出效果合并为一个并将其保存到 iPhone 画廊。为此,我使用以下方法: private func d
pipeline { agent any stages { stage('Build') { steps { e
我是一名优秀的程序员,十分优秀!