- 使用 Spring Initializr 创建 Spring Boot 应用程序
- 在Spring Boot中配置Cassandra
- 在 Spring Boot 上配置 Tomcat 连接池
- 将Camel消息路由到嵌入WildFly的Artemis上
本文整理了Java中org.apache.stanbol.entityhub.servicesapi.yard.Yard.remove()
方法的一些代码示例,展示了Yard.remove()
的具体用法。这些代码示例主要来源于Github
/Stackoverflow
/Maven
等平台,是从一些精选项目中提取出来的代码,具有较强的参考意义,能在一定程度帮忙到你。Yard.remove()
方法的具体详情如下:
包路径:org.apache.stanbol.entityhub.servicesapi.yard.Yard
类名称:Yard
方法名:remove
[英]Removes all the Representation of the parsed ids. null
values are ignored.
[中]删除已解析ID的所有表示形式。null
值被忽略。
代码示例来源:origin: apache/stanbol
@Override
public void remove(Iterable<String> ids) throws IllegalArgumentException, YardException {
yard.remove(ids);
}
@Override
代码示例来源:origin: org.apache.stanbol/org.apache.stanbol.entityhub.core
@Override
public void remove(Iterable<String> ids) throws IllegalArgumentException, YardException {
yard.remove(ids);
}
@Override
代码示例来源:origin: org.apache.stanbol/org.apache.stanbol.entityhub.core
@Override
public void remove(String id) throws IllegalArgumentException, YardException {
yard.remove(id);
}
代码示例来源:origin: apache/stanbol
@Override
public void remove(String id) throws IllegalArgumentException, YardException {
yard.remove(id);
}
代码示例来源:origin: apache/stanbol
@Test(expected = IllegalArgumentException.class)
public void testRemoveRepresentationWithNull() throws YardException {
getYard().remove((String) null);
}
代码示例来源:origin: apache/stanbol
@Test(expected = IllegalArgumentException.class)
public void testRemoveRepresentationsWithNull() throws YardException {
getYard().remove((Iterable<String>) null);
}
代码示例来源:origin: apache/stanbol
private void deleteEntities(Collection<String> ids) throws YardException {
FieldQuery fieldQuery = getQueryFactory().createFieldQuery();
Collection<String> toDelete = new HashSet<String>(ids);
for(String id : ids){
if(id != null && !id.isEmpty()){
fieldQuery.setConstraint(RdfResourceEnum.aboutRepresentation.getUri(), new ReferenceConstraint(id));
for(Iterator<String> it = entityhubYard.findReferences(fieldQuery).iterator();it.hasNext();){
toDelete.add(it.next());
}
}
}
if(!toDelete.isEmpty()){
entityhubYard.remove(toDelete);
}
}
代码示例来源:origin: org.apache.stanbol/org.apache.stanbol.entityhub.core
private void deleteEntities(Collection<String> ids) throws YardException {
FieldQuery fieldQuery = getQueryFactory().createFieldQuery();
Collection<String> toDelete = new HashSet<String>(ids);
for(String id : ids){
if(id != null && !id.isEmpty()){
fieldQuery.setConstraint(RdfResourceEnum.aboutRepresentation.getUri(), new ReferenceConstraint(id));
for(Iterator<String> it = entityhubYard.findReferences(fieldQuery).iterator();it.hasNext();){
toDelete.add(it.next());
}
}
}
if(!toDelete.isEmpty()){
entityhubYard.remove(toDelete);
}
}
代码示例来源:origin: org.apache.stanbol/org.apache.stanbol.entityhub.core
/**
* Deleted both the representation and the metadata of an Entity
* @param yard the yard to delete the entity from
* @param entity the entity to delete
* @throws YardException an any Exception while deleting the Entity
*/
private void deleteEntity(Entity entity) throws YardException {
if(entity != null){
entityhubYard.remove(Arrays.asList(
entity.getRepresentation().getId(),
entity.getMetadata().getId()));
}
}
private void deleteEntities(Collection<String> ids) throws YardException {
代码示例来源:origin: apache/stanbol
@Override
public void delete(String id) throws ManagedSiteException {
try {
getYard().remove(id);
} catch (YardException e) {
throw new ManagedSiteException(e.getMessage(), e);
}
}
代码示例来源:origin: apache/stanbol
/**
* Deleted both the representation and the metadata of an Entity
* @param yard the yard to delete the entity from
* @param entity the entity to delete
* @throws YardException an any Exception while deleting the Entity
*/
private void deleteEntity(Entity entity) throws YardException {
if(entity != null){
entityhubYard.remove(Arrays.asList(
entity.getRepresentation().getId(),
entity.getMetadata().getId()));
}
}
private void deleteEntities(Collection<String> ids) throws YardException {
代码示例来源:origin: org.apache.stanbol/org.apache.stanbol.entityhub.core
/**
* Stores the current configuration used for caching documents back to the
* {@link Yard}. This configuration is present in the {@link #additionalMapper}).
* If this field is <code>null</code> than any existing configuration is
* removed form the index.
* @throws YardException on any error while changing the configuration in the
* yard.
* @throws IllegalArgumentException if <code>null</code> is parsed as {@link Yard}.
*/
protected static void storeAdditionalMappingsConfiguration(Yard yard,FieldMapper additionalMapper) throws YardException,IllegalArgumentException {
if(yard == null){
throw new IllegalArgumentException("The parsed Yard MUST NOT be NULL!");
}
if(additionalMapper == null){
yard.remove(Cache.ADDITIONAL_CONFIGURATION_URI);
} else {
Representation config = yard.getValueFactory().createRepresentation(Cache.ADDITIONAL_CONFIGURATION_URI);
writeFieldConfig(config,additionalMapper);
yard.store(config);
}
}
/**
代码示例来源:origin: apache/stanbol
/**
* Stores the current configuration used for caching documents back to the
* {@link Yard}. This configuration is present in the {@link #additionalMapper}).
* If this field is <code>null</code> than any existing configuration is
* removed form the index.
* @throws YardException on any error while changing the configuration in the
* yard.
* @throws IllegalArgumentException if <code>null</code> is parsed as {@link Yard}.
*/
protected static void storeAdditionalMappingsConfiguration(Yard yard,FieldMapper additionalMapper) throws YardException,IllegalArgumentException {
if(yard == null){
throw new IllegalArgumentException("The parsed Yard MUST NOT be NULL!");
}
if(additionalMapper == null){
yard.remove(Cache.ADDITIONAL_CONFIGURATION_URI);
} else {
Representation config = yard.getValueFactory().createRepresentation(Cache.ADDITIONAL_CONFIGURATION_URI);
writeFieldConfig(config,additionalMapper);
yard.store(config);
}
}
/**
代码示例来源:origin: apache/stanbol
/**
* Stores the baseMappings to the {@link Yard}. This may cause unexpected
* behaviour for subsequest calls of the stored configuration does not
* correspond with the actual data stored within the cache.<p>
* Typically this is only used at the start or end of the creation of a
* full Cache ({@link CacheStrategy#all}) of an referenced site (entity source).<p>
* Note also that if the {@link #baseMapper} is <code>null</code> this
* method removes any existing configuration from the yard.
* @throws YardException an any error while storing the config to the yard.
* @throws IllegalArgumentException if <code>null</code> is parsed as {@link Yard}.
*/
public static void storeBaseMappingsConfiguration(Yard yard,FieldMapper baseMapper) throws YardException,IllegalArgumentException {
if(yard == null){
throw new IllegalArgumentException("The parsed Yard MUST NOT be NULL!");
}
if(baseMapper == null){
yard.remove(Cache.BASE_CONFIGURATION_URI);
} else {
Representation config = yard.getValueFactory().createRepresentation(Cache.BASE_CONFIGURATION_URI);
writeFieldConfig(config,baseMapper);
yard.store(config);
}
}
/**
代码示例来源:origin: org.apache.stanbol/org.apache.stanbol.entityhub.core
/**
* Stores the baseMappings to the {@link Yard}. This may cause unexpected
* behaviour for subsequest calls of the stored configuration does not
* correspond with the actual data stored within the cache.<p>
* Typically this is only used at the start or end of the creation of a
* full Cache ({@link CacheStrategy#all}) of an referenced site (entity source).<p>
* Note also that if the {@link #baseMapper} is <code>null</code> this
* method removes any existing configuration from the yard.
* @throws YardException an any error while storing the config to the yard.
* @throws IllegalArgumentException if <code>null</code> is parsed as {@link Yard}.
*/
public static void storeBaseMappingsConfiguration(Yard yard,FieldMapper baseMapper) throws YardException,IllegalArgumentException {
if(yard == null){
throw new IllegalArgumentException("The parsed Yard MUST NOT be NULL!");
}
if(baseMapper == null){
yard.remove(Cache.BASE_CONFIGURATION_URI);
} else {
Representation config = yard.getValueFactory().createRepresentation(Cache.BASE_CONFIGURATION_URI);
writeFieldConfig(config,baseMapper);
yard.store(config);
}
}
/**
代码示例来源:origin: apache/stanbol
/**
* Tests if <code>null</code> values within the Iterable are ignored and do not cause an Exception
*
* @throws YardException
*/
@Test
public void testRemoveRepresentationsWithNullValue() throws YardException {
// NOTE: This test needs not to use the create(..) method, because we
// remove the created representation form the store anyway as part of the
// test
String id = "urn:yard.test.testRemoveRepresentationsWithNullValue:representation.id";
Yard yard = getYard();
Representation test = yard.create(id); // create and add
assertTrue(yard.isRepresentation(test.getId()));
yard.remove(Arrays.asList(test.getId(), null));
assertFalse(yard.isRepresentation(test.getId()));
}
代码示例来源:origin: apache/stanbol
/**
* Tests that {@link Representation} IDs that are not stored by the yard are ignored by the multiple
* remove method
*
* @throws YardException
*/
@Test
public void testRemoveRepresentationsWithNonStoredValue() throws YardException {
// NOTE: This test needs not to use the create(..) method, because we
// remove the created representation form the store anyway as part of the
// test
String id = "urn:yard.test.testRemoveRepresentationsWithNullValue:representation.stored";
String id2 = "urn:yard.test.testRemoveRepresentationsWithNullValue:representation.notStored";
Yard yard = getYard();
Representation test = yard.create(id); // create and add
assertTrue(yard.isRepresentation(test.getId()));
yard.remove(Arrays.asList(test.getId(), id2));
assertFalse(yard.isRepresentation(test.getId()));
assertFalse(yard.isRepresentation(id2));
}
代码示例来源:origin: apache/stanbol
@Test
public void testIsRepresentation() throws YardException {
String id = "urn:yard.test.testIsRepresentation:representation.id";
Yard yard = getYard();
// Representations created via the yard need to be created (as empty
// representation within the yard
Representation test = create();
assertTrue(yard.isRepresentation(test.getId()));
// Representations created via the ValueFactory MUST NOT be added to the
// Yard
Representation test2 = create(id, false);
assertFalse(yard.isRepresentation(test2.getId()));
// now store test2 and test again
yard.store(test2);
assertTrue(yard.isRepresentation(test2.getId()));
// now remove test and test again
yard.remove(test.getId());
assertFalse(yard.isRepresentation(test.getId()));
yard.remove(test2.getId());
assertFalse(yard.isRepresentation(test2.getId()));
}
代码示例来源:origin: apache/stanbol
/**
* Tests that multiple Representations are removed.
*
* @throws YardException
*/
@Test
public void testRemoveRepresentations() throws YardException {
// NOTE: This test needs not to use the create(..) method, because we
// remove the created representation form the store anyway as part of the
// test
String id = "urn:yard.test.testRemoveRepresentationsWithNullValue:representation.id1";
String id2 = "urn:yard.test.testRemoveRepresentationsWithNullValue:representation.id2";
String field = "urn:the.field:used.for.this.Test";
String testValue = "This is a test";
Yard yard = getYard();
// use both ways to add the two Representations (should make no differences,
// but one never can know ...
Representation test1 = yard.create(id); // create and add
Representation test2 = yard.getValueFactory().createRepresentation(id2); // create
test2.add(field, testValue); // add value
yard.store(test2);// store
assertTrue(yard.isRepresentation(test1.getId())); // test if stored
assertTrue(yard.isRepresentation(test2.getId()));
yard.remove(Arrays.asList(test1.getId(), test2.getId())); // remove
assertFalse(yard.isRepresentation(test1.getId())); // test if removed
assertFalse(yard.isRepresentation(test2.getId()));
}
/**
代码示例来源:origin: apache/stanbol
yard.remove(test.getId()); // test (1) - the remove
我在网上搜索但没有找到任何合适的文章解释如何使用 javascript 使用 WCF 服务,尤其是 WebScriptEndpoint。 任何人都可以对此给出任何指导吗? 谢谢 最佳答案 这是一篇关于
我正在编写一个将运行 Linux 命令的 C 程序,例如: cat/etc/passwd | grep 列表 |剪切-c 1-5 我没有任何结果 *这里 parent 等待第一个 child (chi
所以我正在尝试处理文件上传,然后将该文件作为二进制文件存储到数据库中。在我存储它之后,我尝试在给定的 URL 上提供文件。我似乎找不到适合这里的方法。我需要使用数据库,因为我使用 Google 应用引
我正在尝试制作一个宏,将下面的公式添加到单元格中,然后将其拖到整个列中并在 H 列中复制相同的公式 我想在 F 和 H 列中输入公式的数据 Range("F1").formula = "=IF(ISE
问题类似于this one ,但我想使用 OperatorPrecedenceParser 解析带有函数应用程序的表达式在 FParsec . 这是我的 AST: type Expression =
我想通过使用 sequelize 和 node.js 将这个查询更改为代码取决于在哪里 select COUNT(gender) as genderCount from customers where
我正在使用GNU bash,版本5.0.3(1)-发行版(x86_64-pc-linux-gnu),我想知道为什么简单的赋值语句会出现语法错误: #/bin/bash var1=/tmp
这里,为什么我的代码在 IE 中不起作用。我的代码适用于所有浏览器。没有问题。但是当我在 IE 上运行我的项目时,它发现错误。 而且我的 jquery 类和 insertadjacentHTMl 也不
我正在尝试更改标签的innerHTML。我无权访问该表单,因此无法编辑 HTML。标签具有的唯一标识符是“for”属性。 这是输入和标签的结构:
我有一个页面,我可以在其中返回用户帖子,可以使用一些 jquery 代码对这些帖子进行即时评论,在发布新评论后,我在帖子下插入新评论以及删除 按钮。问题是 Delete 按钮在新插入的元素上不起作用,
我有一个大约有 20 列的“管道分隔”文件。我只想使用 sha1sum 散列第一列,它是一个数字,如帐号,并按原样返回其余列。 使用 awk 或 sed 执行此操作的最佳方法是什么? Accounti
我需要将以下内容插入到我的表中...我的用户表有五列 id、用户名、密码、名称、条目。 (我还没有提交任何东西到条目中,我稍后会使用 php 来做)但由于某种原因我不断收到这个错误:#1054 - U
所以我试图有一个输入字段,我可以在其中输入任何字符,但然后将输入的值小写,删除任何非字母数字字符,留下“。”而不是空格。 例如,如果我输入: 地球的 70% 是水,-!*#$^^ & 30% 土地 输
我正在尝试做一些我认为非常简单的事情,但出于某种原因我没有得到想要的结果?我是 javascript 的新手,但对 java 有经验,所以我相信我没有使用某种正确的规则。 这是一个获取输入值、检查选择
我想使用 angularjs 从 mysql 数据库加载数据。 这就是应用程序的工作原理;用户登录,他们的用户名存储在 cookie 中。该用户名显示在主页上 我想获取这个值并通过 angularjs
我正在使用 autoLayout,我想在 UITableViewCell 上放置一个 UIlabel,它应该始终位于单元格的右侧和右侧的中心。 这就是我想要实现的目标 所以在这里你可以看到我正在谈论的
我需要与 MySql 等效的 elasticsearch 查询。我的 sql 查询: SELECT DISTINCT t.product_id AS id FROM tbl_sup_price t
我正在实现代码以使用 JSON。 func setup() { if let flickrURL = NSURL(string: "https://api.flickr.com/
我尝试使用for循环声明变量,然后测试cols和rols是否相同。如果是,它将运行递归函数。但是,我在 javascript 中执行 do 时遇到问题。有人可以帮忙吗? 现在,在比较 col.1 和
我举了一个我正在处理的问题的简短示例。 HTML代码: 1 2 3 CSS 代码: .BB a:hover{ color: #000; } .BB > li:after {
我是一名优秀的程序员,十分优秀!