- 使用 Spring Initializr 创建 Spring Boot 应用程序
- 在Spring Boot中配置Cassandra
- 在 Spring Boot 上配置 Tomcat 连接池
- 将Camel消息路由到嵌入WildFly的Artemis上
本文整理了Java中com.spotify.helios.servicescommon.coordination.ZooKeeperClientProvider
类的一些代码示例,展示了ZooKeeperClientProvider
类的具体用法。这些代码示例主要来源于Github
/Stackoverflow
/Maven
等平台,是从一些精选项目中提取出来的代码,具有较强的参考意义,能在一定程度帮忙到你。ZooKeeperClientProvider
类的具体详情如下:
包路径:com.spotify.helios.servicescommon.coordination.ZooKeeperClientProvider
类名称:ZooKeeperClientProvider
暂无
代码示例来源:origin: spotify/helios
@Before
public void setUp() throws Exception {
// make zookeeper interfaces
curator = zk().curatorWithSuperAuth();
final ZooKeeperClientProvider zkcp = new ZooKeeperClientProvider(
new DefaultZooKeeperClient(curator), ZooKeeperModelReporter.noop());
final List<EventSender> eventSenders = Collections.emptyList();
zkMasterModel = new ZooKeeperMasterModel(zkcp, getClass().getName(), eventSenders, "");
startDefaultMaster();
agent = startDefaultAgent(TEST_HOST);
client = defaultClient();
awaitHostRegistered(client, TEST_HOST, LONG_WAIT_SECONDS, SECONDS);
}
代码示例来源:origin: spotify/helios
private ZooKeeperClient client(final String tag) {
return provider.get("persistent_directory_" + tag);
}
代码示例来源:origin: spotify/helios
@Test
public void testRemoveJobDeletesHistory() throws Exception {
startDefaultAgent(testHost());
awaitHostStatus(testHost(), UP, LONG_WAIT_SECONDS, SECONDS);
final JobId jobId = createJob(testJobName, testJobVersion, BUSYBOX, IDLE_COMMAND);
deployJob(jobId, testHost());
awaitJobState(
defaultClient(), testHost(), jobId, TaskStatus.State.RUNNING, LONG_WAIT_SECONDS, SECONDS);
undeployJob(jobId, testHost());
awaitJobUndeployed(defaultClient(), testHost(), jobId, LONG_WAIT_SECONDS, SECONDS);
final ZooKeeperClient zkClient = new ZooKeeperClientProvider(
new DefaultZooKeeperClient(zk().curatorWithSuperAuth()), ZooKeeperModelReporter.noop())
.get("test-client");
// Check that there's some history events
assertNotNull(zkClient.stat(Paths.historyJob(jobId)));
// Remove job
final JobDeleteResponse response =
defaultClient().deleteJob(jobId).get(WAIT_TIMEOUT_SECONDS, SECONDS);
assertEquals(JobDeleteResponse.Status.OK, response.getStatus());
// Verify that history is gone
assertNull(zkClient.stat(Paths.historyJob(jobId)));
}
}
代码示例来源:origin: spotify/helios
final ZooKeeperModelReporter modelReporter =
new ZooKeeperModelReporter(metrics.getZooKeeperMetrics());
final ZooKeeperClientProvider zkClientProvider = new ZooKeeperClientProvider(
zooKeeperClient, modelReporter);
new JobHistoryReaper(model, zkClientProvider.get("jobHistoryReaper")));
} else {
log.info("Reaping of orphaned jobs disabled");
代码示例来源:origin: spotify/helios
/**
* Returns the job configuration for the job specified by {@code id} as a
* {@link Job} object. A return value of null indicates the job doesn't exist.
*/
@Override
public Job getJob(final JobId id) {
log.debug("getting job: {}", id);
final ZooKeeperClient client = provider.get("getJobId");
return getJob(client, id);
}
代码示例来源:origin: spotify/helios
final ZooKeeperClientProvider zkClientProvider = new ZooKeeperClientProvider(
zooKeeperClient, modelReporter);
代码示例来源:origin: spotify/helios
@Override
public AgentInfo getAgentInfo(final String host) {
return getAgentInfo(provider.get("getAgentInfo"), host);
}
代码示例来源:origin: at.molindo/helios-services
final ZooKeeperClientProvider zkClientProvider = new ZooKeeperClientProvider(
zooKeeperClient, modelReporter);
final KafkaClientProvider kafkaClientProvider = new KafkaClientProvider(
代码示例来源:origin: spotify/helios
/**
* Undoes the effect of {@link ZooKeeperMasterModel#registerHost(String, String)}. Cleans up
* any leftover host-related things.
*/
@Override
public void deregisterHost(final String host)
throws HostNotFoundException, HostStillInUseException {
final ZooKeeperClient client = provider.get("deregisterHost");
ZooKeeperRegistrarUtil.deregisterHost(client, host);
}
代码示例来源:origin: at.molindo/helios-services
final ZooKeeperModelReporter modelReporter = new ZooKeeperModelReporter(
riemannFacade, metrics.getZooKeeperMetrics());
final ZooKeeperClientProvider zkClientProvider = new ZooKeeperClientProvider(
zooKeeperClient, modelReporter);
final KafkaClientProvider kafkaClientProvider = new KafkaClientProvider(
代码示例来源:origin: spotify/helios
/**
* Creates a config entry within the specified agent to un/deploy a job, or more generally, change
* the deployment status according to the {@code Goal} value in {@link Deployment}.
*/
@Override
public void deployJob(final String host, final Deployment deployment, final String token)
throws JobDoesNotExistException, JobAlreadyDeployedException, HostNotFoundException,
JobPortAllocationConflictException, TokenVerificationException {
final ZooKeeperClient client = provider.get("deployJob");
deployJobRetry(client, host, deployment, 0, token);
}
代码示例来源:origin: spotify/helios
@Override
public DeploymentGroup getDeploymentGroup(final String name)
throws DeploymentGroupDoesNotExistException {
log.debug("getting deployment-group: {}", name);
final ZooKeeperClient client = provider.get("getDeploymentGroup");
return getDeploymentGroup(client, name);
}
代码示例来源:origin: spotify/helios
@Override
public Map<String, String> getHostLabels(final String host) {
final ZooKeeperClient client = provider.get("getHostStatus");
if (!ZooKeeperRegistrarUtil.isHostRegistered(client, host)) {
return emptyMap();
}
final Map<String, String> labels = getLabels(client, host);
return labels == null ? emptyMap() : labels;
}
代码示例来源:origin: spotify/helios
@Override
public boolean isHostUp(final String host) {
final ZooKeeperClient client = provider.get("isHostUp");
return ZooKeeperRegistrarUtil.isHostRegistered(client, host) && checkHostUp(client, host);
}
代码示例来源:origin: spotify/helios
/**
* Returns a list of the hosts/agents that have been registered.
*/
@Override
public List<String> listHosts() {
try {
// TODO (dano): only return hosts whose agents completed registration (i.e. has id nodes)
return provider.get("listHosts").getChildren(Paths.configHosts());
} catch (KeeperException.NoNodeException e) {
return emptyList();
} catch (KeeperException e) {
throw new HeliosRuntimeException("listing hosts failed", e);
}
}
代码示例来源:origin: spotify/helios
@Override
public List<String> getDeploymentGroupHosts(final String name)
throws DeploymentGroupDoesNotExistException {
log.debug("getting deployment group hosts: {}", name);
final ZooKeeperClient client = provider.get("getDeploymentGroupHosts");
final DeploymentGroup deploymentGroup = getDeploymentGroup(client, name);
if (deploymentGroup == null) {
throw new DeploymentGroupDoesNotExistException(name);
}
return getHosts(client, Paths.statusDeploymentGroupHosts(name));
}
代码示例来源:origin: spotify/helios
/**
* Registers a host into ZooKeeper. The {@code id} is initially generated randomly by the Agent
* and persisted on disk. This way, in the event that you have two agents attempting to register
* with the same value of @{code host}, the first one will win.
*/
@Override
public void registerHost(final String host, final String id) {
final ZooKeeperClient client = provider.get("registerHost");
try {
ZooKeeperRegistrarUtil.registerHost(client, Paths.configHostId(host), host, id);
} catch (Exception e) {
throw new HeliosRuntimeException("registering host " + host + " failed", e);
}
}
代码示例来源:origin: spotify/helios
/**
* Returns a list of the host names of the currently running masters.
*/
@Override
public List<String> getRunningMasters() {
final ZooKeeperClient client = provider.get("getRunningMasters");
try {
final List<String> masters = client.getChildren(Paths.statusMaster());
final ImmutableList.Builder<String> upMasters = ImmutableList.builder();
for (final String master : masters) {
if (client.exists(Paths.statusMasterUp(master)) != null) {
upMasters.add(master);
}
}
return upMasters.build();
} catch (KeeperException e) {
throw new HeliosRuntimeException("listing masters failed", e);
}
}
代码示例来源:origin: spotify/helios
throw new JobDoesNotExistException(jobId);
final ZooKeeperClient client = provider.get("getJobHistory");
final List<String> hosts;
代码示例来源:origin: spotify/helios
log.debug("getting deployment groups");
final String folder = Paths.configDeploymentGroups();
final ZooKeeperClient client = provider.get("getDeploymentGroups");
try {
final List<String> names;
COM 内存泄漏最常见的原因是什么? 我读过将初始化的 CComBSTR 的地址作为 [out] 参数传递给函数会导致泄漏。我正在寻找像这样枚举其他常见的编程错误。 最佳答案 未能为 COM 对象使用
在COM服务器执行过程中分配一 block 内存,然后通过一个输出参数将该内存块传递给客户端是很常见的。然后,客户端有义务使用 CoTaskMemFree() 等方法释放该内存。 问题是,这 bloc
我有一些 MFC 代码(自定义 CWnd 控件和一些要公开的类),我需要将它们制作成带有接口(interface)的 activex/COM 对象。使用 MFC 支持制作 ATL 项目并以这种方式制作
Devenv.com 是 visual studio 命令行界面,当您键入 devenv/? 时,devenv 的帮助会出现在控制台上。但是,如果没有任何选项,devenv.com 只会调用 deve
如何将 COM 接口(interface)的引用作为 COM 库中的参数传递? 这是示例: 1)客户端代码成功创建coclass并接收到pFunctionDiscovery中的接口(interface
我正在使用 django,我在 s3 中存储了诸如 imgs 之类的东西(为此我使用的是 boto),但最近我收到了这个错误: 'foo.bar.com.s3.amazonaws.com' doesn
我已经使用组件服务 MSC 对话框创建了一个 COM+ 应用程序。我将一个现有的 COM 对象导入到这个新的 COM+ 应用程序中。 我知道可以通过 COM+ 应用程序调用该 COM 对象。我可以简单
关闭。这个问题是off-topic .它目前不接受答案。 想改进这个问题吗? Update the question所以它是on-topic用于堆栈溢出。 关闭 11 年前。 Improve thi
我正在使用通过 COM Interop 包装器公开的第三方 dll。但是,其中一个 COM 调用经常卡住(至少从不返回)。为了至少让我的代码更健壮一些,我异步包装了调用(_getDeviceInfoW
很多年前我读到有一个简单的 php 脚本可以将您的网站重定向到 http://example.com/google.com 到 google.com它适用于正斜杠右侧的任何域。我忘记了这个脚本是什么或
我正在实现我的第一个进程外 COM 服务器(我的第一个 COM 服务器,就此而言)。我已经按照步骤编写了一个 IDL 文件,为代理/ stub DLL 生成代码,编译 DLL,并注册它。 当我检查注册
是否可以在未知接口(interface)上增加 RCW 引用计数? (即不是底层 COM 对象的引用计数) 我有一些旧的 COM 服务器代码 int Method1(object comobject)
我注意到许多关于 COM 的书籍等都指出,在 COM 聚合中实现一个可用作内部对象的对象相对容易。但是,除非我遗漏了什么,否则聚合似乎只能在极其有限的场景中成功,因此只有在明确识别出这种场景时才应提供
假设我正在开发一个安装 COM 组件并安装程序注册它们的应用程序。这很好用。 现在该软件需要从内存棒上运行。如何注册我的库运行时并确保在运行应用程序后清理注册表? 最佳答案 您总是在 XP 或更高版本
我们已经使用Microsoft的ActiveX/COM(VB6)技术开发了一个软件系统。去年,我对自动化构建过程和整个SCM越来越感兴趣。我集中搜索了网络的大部分内容,以获取有关如何使用基于COM的软
我对 com 线程模型有点困惑。 我有一个 inproc 服务器,我想创建一个可从任何线程访问的接口(interface),而不管 CoInitializeEx 中使用的线程模型和/或标志。 当将接口
我的包以旁加载方式安装,并不断遇到特定于应用程序的权限错误。 是的,许多人建议在 regedit 和组件服务中手动更改权限和所有者。 我的应用实际上在组件服务(DCOMCNFG、DCOMCNFG -3
我正在使用第三方应用程序,并调用创建 的实例。我的 COM 对象。这个调用成功了,但是第三方应用程序上的函数没有返回指向创建对象的指针(我不知道为什么)。有没有办法获得指向我的对象的指针? 为了澄清,
我有一个用 C# 编写的托管 COM 对象和一个用 C++(MFC 和 ATL)编写的 native COM 客户端和接收器。客户端创建对象并在启动时向其事件接口(interface)提供建议,并在其
我的应用程序需要注册两个 COM DLL。如果用户有必要的访问权限,它会自动完成,否则可以使用 regsvr32 完成。 . 现在在一些工作站上会发生以下情况: 开始cmd.exe作为管理员 注册第一
我是一名优秀的程序员,十分优秀!