- 使用 Spring Initializr 创建 Spring Boot 应用程序
- 在Spring Boot中配置Cassandra
- 在 Spring Boot 上配置 Tomcat 连接池
- 将Camel消息路由到嵌入WildFly的Artemis上
本文整理了Java中com.zsmartsystems.zigbee.zcl.clusters.ZclColorControlCluster.setReporting()
方法的一些代码示例,展示了ZclColorControlCluster.setReporting()
的具体用法。这些代码示例主要来源于Github
/Stackoverflow
/Maven
等平台,是从一些精选项目中提取出来的代码,具有较强的参考意义,能在一定程度帮忙到你。ZclColorControlCluster.setReporting()
方法的具体详情如下:
包路径:com.zsmartsystems.zigbee.zcl.clusters.ZclColorControlCluster
类名称:ZclColorControlCluster
方法名:setReporting
暂无
代码示例来源:origin: zsmartsystems/com.zsmartsystems.zigbee
/**
* Set reporting for the <i>CurrentX</i> attribute [attribute ID <b>3</b>].
* <p>
* The CurrentX attribute contains the current value of the normalized chromaticity
* value x, as defined in the CIE xyY Color Space. It is updated as fast as practical
* during commands that change the color.
* <p>
* The value of x shall be related to the CurrentX attribute by the relationship
* <p>
* x = CurrentX / 65535 (CurrentX in the range 0 to 65279 inclusive)
* <p>
* The attribute is of type {@link Integer}.
* <p>
* The implementation of this attribute by a device is MANDATORY
*
* @param minInterval {@link int} minimum reporting period
* @param maxInterval {@link int} maximum reporting period
* @param reportableChange {@link Object} delta required to trigger report
* @return the {@link Future<CommandResult>} command result future
*/
public Future<CommandResult> setCurrentXReporting(final int minInterval, final int maxInterval, final Object reportableChange) {
return setReporting(attributes.get(ATTR_CURRENTX), minInterval, maxInterval, reportableChange);
}
代码示例来源:origin: zsmartsystems/com.zsmartsystems.zigbee
/**
* Set reporting for the <i>EnhancedCurrentHue</i> attribute [attribute ID <b>16384</b>].
* <p>
* The EnhancedCurrentHueattribute represents non-equidistant steps along the CIE 1931 color
* triangle, and it provides 16-bits precision. The upper 8 bits of this attribute SHALL be
* used as an index in the implementation specific XY lookup table to provide the non-equidistance
* steps (see the ZLL test specification for an example). The lower 8 bits SHALL be used to
* interpolate between these steps in a linear way in order to provide color zoom for the user.
* <p>
* The attribute is of type {@link Integer}.
* <p>
* The implementation of this attribute by a device is OPTIONAL
*
* @param minInterval {@link int} minimum reporting period
* @param maxInterval {@link int} maximum reporting period
* @param reportableChange {@link Object} delta required to trigger report
* @return the {@link Future<CommandResult>} command result future
*/
public Future<CommandResult> setEnhancedCurrentHueReporting(final int minInterval, final int maxInterval, final Object reportableChange) {
return setReporting(attributes.get(ATTR_ENHANCEDCURRENTHUE), minInterval, maxInterval, reportableChange);
}
代码示例来源:origin: zsmartsystems/com.zsmartsystems.zigbee
/**
* Set reporting for the <i>CurrentY</i> attribute [attribute ID <b>4</b>].
* <p>
* The CurrentY attribute contains the current value of the normalized chromaticity
* value y, as defined in the CIE xyY Color Space. It is updated as fast as practical
* during commands that change the color.
* <p>
* The value of y shall be related to the CurrentY attribute by the relationship
* <p>
* y = CurrentY / 65535 (CurrentY in the range 0 to 65279 inclusive)
* <p>
* The attribute is of type {@link Integer}.
* <p>
* The implementation of this attribute by a device is MANDATORY
*
* @param minInterval {@link int} minimum reporting period
* @param maxInterval {@link int} maximum reporting period
* @param reportableChange {@link Object} delta required to trigger report
* @return the {@link Future<CommandResult>} command result future
*/
public Future<CommandResult> setCurrentYReporting(final int minInterval, final int maxInterval, final Object reportableChange) {
return setReporting(attributes.get(ATTR_CURRENTY), minInterval, maxInterval, reportableChange);
}
代码示例来源:origin: zsmartsystems/com.zsmartsystems.zigbee
/**
* Set reporting for the <i>CurrentSaturation</i> attribute [attribute ID <b>1</b>].
* <p>
* The CurrentSaturation attribute holds the current saturation value of the light. It is
* updated as fast as practical during commands that change the saturation.
* The saturation shall be related to the CurrentSaturation attribute by the
* relationship
* Saturation = CurrentSaturation/254 (CurrentSaturation in the range 0 - 254 inclusive)
* If this attribute is implemented then the CurrentHue and ColorMode attributes
* shall also be implemented.
* <p>
* The attribute is of type {@link Integer}.
* <p>
* The implementation of this attribute by a device is OPTIONAL
*
* @param minInterval {@link int} minimum reporting period
* @param maxInterval {@link int} maximum reporting period
* @param reportableChange {@link Object} delta required to trigger report
* @return the {@link Future<CommandResult>} command result future
*/
public Future<CommandResult> setCurrentSaturationReporting(final int minInterval, final int maxInterval, final Object reportableChange) {
return setReporting(attributes.get(ATTR_CURRENTSATURATION), minInterval, maxInterval, reportableChange);
}
代码示例来源:origin: zsmartsystems/com.zsmartsystems.zigbee
/**
* Set reporting for the <i>CurrentHue</i> attribute [attribute ID <b>0</b>].
* <p>
* The CurrentHue attribute contains the current hue value of the light. It is updated
* as fast as practical during commands that change the hue.
* <p>
* The hue in degrees shall be related to the CurrentHue attribute by the relationship
* Hue = CurrentHue x 360 / 254 (CurrentHue in the range 0 - 254 inclusive)
* <p>
* If this attribute is implemented then the CurrentSaturation and ColorMode
* attributes shall also be implemented.
* <p>
* The attribute is of type {@link Integer}.
* <p>
* The implementation of this attribute by a device is OPTIONAL
*
* @param minInterval {@link int} minimum reporting period
* @param maxInterval {@link int} maximum reporting period
* @param reportableChange {@link Object} delta required to trigger report
* @return the {@link Future<CommandResult>} command result future
*/
public Future<CommandResult> setCurrentHueReporting(final int minInterval, final int maxInterval, final Object reportableChange) {
return setReporting(attributes.get(ATTR_CURRENTHUE), minInterval, maxInterval, reportableChange);
}
代码示例来源:origin: zsmartsystems/com.zsmartsystems.zigbee
/**
* Set reporting for the <i>ColorTemperature</i> attribute [attribute ID <b>7</b>].
* <p>
* The ColorTemperature attribute contains a scaled inverse of the current value of
* the color temperature. It is updated as fast as practical during commands that
* change the color.
* <p>
* The color temperature value in Kelvins shall be related to the ColorTemperature
* attribute by the relationship
* <p>
* Color temperature = 1,000,000 / ColorTemperature (ColorTemperature in the
* range 1 to 65279 inclusive, giving a color temperature range from 1,000,000
* Kelvins to 15.32 Kelvins).
* <p>
* The value ColorTemperature = 0 indicates an undefined value. The value
* ColorTemperature = 65535 indicates an invalid value.
* <p>
* The attribute is of type {@link Integer}.
* <p>
* The implementation of this attribute by a device is OPTIONAL
*
* @param minInterval {@link int} minimum reporting period
* @param maxInterval {@link int} maximum reporting period
* @param reportableChange {@link Object} delta required to trigger report
* @return the {@link Future<CommandResult>} command result future
*/
public Future<CommandResult> setColorTemperatureReporting(final int minInterval, final int maxInterval, final Object reportableChange) {
return setReporting(attributes.get(ATTR_COLORTEMPERATURE), minInterval, maxInterval, reportableChange);
}
代码示例来源:origin: openhab/org.openhab.binding.zigbee
clusterColorControl.setReporting(colorModeAttribute, 1, REPORTING_PERIOD_DEFAULT_MAX, 1);
代码示例来源:origin: openhab/org.openhab.binding.zigbee
clusterColorControl.setReporting(colorModeAttribute, 1, REPORTING_PERIOD_DEFAULT_MAX, 1);
本文整理了Java中com.zsmartsystems.zigbee.ZigBeeApsFrame类的一些代码示例,展示了ZigBeeApsFrame类的具体用法。这些代码示例主要来源于Github/
本文整理了Java中com.zsmartsystems.zigbee.ZigBeeEndpointAddress类的一些代码示例,展示了ZigBeeEndpointAddress类的具体用法。这些代码
本文整理了Java中com.zsmartsystems.zigbee.ZigBeeChannel类的一些代码示例,展示了ZigBeeChannel类的具体用法。这些代码示例主要来源于Github/St
本文整理了Java中com.zsmartsystems.zigbee.ZigBeeNetworkManager类的一些代码示例,展示了ZigBeeNetworkManager类的具体用法。这些代码示例
本文整理了Java中com.zsmartsystems.zigbee.ZigBeeEndpoint类的一些代码示例,展示了ZigBeeEndpoint类的具体用法。这些代码示例主要来源于Github/
本文整理了Java中com.zsmartsystems.zigbee.ZigBeeNode类的一些代码示例,展示了ZigBeeNode类的具体用法。这些代码示例主要来源于Github/Stackove
本文整理了Java中com.zsmartsystems.zigbee.ZigBeeProfileType类的一些代码示例,展示了ZigBeeProfileType类的具体用法。这些代码示例主要来源于G
本文整理了Java中com.zsmartsystems.zigbee.ZigBeeAddress类的一些代码示例,展示了ZigBeeAddress类的具体用法。这些代码示例主要来源于Github/St
本文整理了Java中com.zsmartsystems.zigbee.ZigBeeGroupAddress类的一些代码示例,展示了ZigBeeGroupAddress类的具体用法。这些代码示例主要来源
本文整理了Java中com.zsmartsystems.zigbee.ZigBeeCommand类的一些代码示例,展示了ZigBeeCommand类的具体用法。这些代码示例主要来源于Github/St
本文整理了Java中com.zsmartsystems.zigbee.ZigBeeNetworkNodeListener类的一些代码示例,展示了ZigBeeNetworkNodeListener类的具
本文整理了Java中com.zsmartsystems.zigbee.ZigBeeBroadcastDestination类的一些代码示例,展示了ZigBeeBroadcastDestination类
本文整理了Java中com.zsmartsystems.zigbee.ZigBeeStackType类的一些代码示例,展示了ZigBeeStackType类的具体用法。这些代码示例主要来源于Githu
本文整理了Java中com.zsmartsystems.zigbee.security.ZigBeeKey类的一些代码示例,展示了ZigBeeKey类的具体用法。这些代码示例主要来源于Github/S
本文整理了Java中com.zsmartsystems.zigbee.zcl.ZclStatus类的一些代码示例,展示了ZclStatus类的具体用法。这些代码示例主要来源于Github/Stacko
本文整理了Java中com.zsmartsystems.zigbee.zcl.ZclAttribute类的一些代码示例,展示了ZclAttribute类的具体用法。这些代码示例主要来源于Github/
本文整理了Java中com.zsmartsystems.zigbee.transport.ZigBeeTransportTransmit类的一些代码示例,展示了ZigBeeTransportTrans
本文整理了Java中com.zsmartsystems.zigbee.zcl.ZclCluster类的一些代码示例,展示了ZclCluster类的具体用法。这些代码示例主要来源于Github/Stac
本文整理了Java中com.zsmartsystems.zigbee.zcl.ZclTransactionMatcher类的一些代码示例,展示了ZclTransactionMatcher类的具体用法。
本文整理了Java中com.zsmartsystems.zigbee.dao.ZigBeeNodeDao类的一些代码示例,展示了ZigBeeNodeDao类的具体用法。这些代码示例主要来源于Githu
我是一名优秀的程序员,十分优秀!