- html - 出于某种原因,IE8 对我的 Sass 文件中继承的 html5 CSS 不友好?
- JMeter 在响应断言中使用 span 标签的问题
- html - 在 :hover and :active? 上具有不同效果的 CSS 动画
- html - 相对于居中的 html 内容固定的 CSS 重复背景?
是否需要在 brew switch
之前/之后运行 brew unlink
/brew link
?
根据此链接https://docs.brew.sh/Tips-N'-Tricks#activate-a-previously-installed-version-of-a-formula brew switch
激活以前安装的公式版本。
看起来我安装了一些“系统”python(它安装在 /usr/bin/python3
下),但不是用 brew 安装的,如果我执行 brew 就可以看到它unlink python@3.9
和 brew unlink python@3.7
:
python -V
Python 3.7.3
/usr/bin/python3 -V
Python 3.7.3
which python3
/usr/bin/python3
然后我切换到 python@3.9:
brew switch python@3.9 3.9.0_1
python -V
Python 3.9.0
然后我切换到 python@3.7:
brew switch python@3.7 3.7.9
python -V
Python 3.9.0
但它仍然显示 Python 3.9.0,ls -l/usr/local/bin | grep python3
也显示了 python3.9。
我还尝试在每次 brew switch 测试之前取消所有 brew python 包的链接:
brew unlink python@3.7 && brew unlink python@3.9
brew switch python@3.7 3.7.9
python -V
Python 3.7.3
brew unlink python@3.7 && brew unlink python@3.9
brew switch python@3.9 3.9.0_1
python -V
Python 3.9.0
所以似乎出于某种原因它会自动链接 brew switch 上的 python@3.9 而不会为 python@3.7 这样做,为什么? brew switch
里面有 brew unlink
/brew link
还是应该手动完成?
我可以只执行 brew unlink
/brew link
来切换 python 版本吗?
更新:
brew
的较新版本似乎没有开关
:
Error: Calling `brew switch` is disabled! Use `brew link` @-versioned formulae instead.
brew --version
Homebrew 2.7.7
Homebrew/homebrew-core (git revision 918f0; last commit 2021-02-04)
Homebrew/homebrew-cask (git revision 2b83c; last commit 2021-02-04)
所以现在它应该是这样的:
brew unlink python@3.7 && brew unlink python@3.9
brew link python@3.7
python -V
Python 3.7.9
最佳答案
brew switch
不再是 brew 命令。
$ brew --version
Homebrew 3.0.0
Homebrew/homebrew-core (git revision 8d644; last commit 2021-02-10)
$ brew switch mariadb@10.3
Error: Unknown command: switch
Tips and Tricks您在问题中提到的页面也删除了对 brew switch
的任何提及。
Installing previous versions of formulae
The supported method of installing specific versions of some formulaeis to see if there is a versioned formula (e.g. gcc@7) available. Ifthe version you’re looking for isn’t available, consider using brewextract.
或者,man brew
中没有提到 brew switch
。
看来您的问题已由 Homebrew 维护者在上游解决。
注意 brew switch
自 Homebrew 2.6.0 以来已被弃用.
==更新==
如果我们以 python@3.7 和 python@3.9 为例。我们应该首先检查 brew info python@3.7
和 brew info python@3.9
的输出。我们看到 python@3.7 是 keg-only :
python@3.7 is keg-only, which means it was not symlinked into /usr/local,
because this is an alternate version of another formula.
这不是 python@3.9 的情况,因为它现在是 python 公式的别名。这意味着安装 python@3.9 会自动运行 brew link python@3.9
而安装 python@3.7 不会运行 brew link python@3.7
。
然后要列出哪些文件将与 python@3.9 链接,您可以运行 brew link --dry-run python@3.9
Would link:
/usr/local/bin/2to3
/usr/local/bin/2to3-3.9
/usr/local/bin/easy_install-3.9
/usr/local/bin/idle3
/usr/local/bin/idle3.9
/usr/local/bin/pip3
/usr/local/bin/pip3.9
/usr/local/bin/pydoc3
/usr/local/bin/pydoc3.9
/usr/local/bin/python3
/usr/local/bin/python3-config
/usr/local/bin/python3.9
/usr/local/bin/python3.9-config
/usr/local/bin/wheel3
/usr/local/share/man/man1/python3.1
/usr/local/share/man/man1/python3.9.1
/usr/local/lib/pkgconfig/python-3.9-embed.pc
/usr/local/lib/pkgconfig/python-3.9.pc
/usr/local/lib/pkgconfig/python3-embed.pc
/usr/local/lib/pkgconfig/python3.pc
/usr/local/Frameworks/Python.framework/Headers
/usr/local/Frameworks/Python.framework/Python
/usr/local/Frameworks/Python.framework/Resources
/usr/local/Frameworks/Python.framework/Versions/3.9
/usr/local/Frameworks/Python.framework/Versions/Current
要列出哪些文件将与 python@3.7 链接,请运行 brew link --dry-run python@3.7
:
Would link:
/usr/local/bin/2to3
/usr/local/bin/2to3-3.7
/usr/local/bin/easy_install-3.7
/usr/local/bin/idle3
/usr/local/bin/idle3.7
/usr/local/bin/pip3
/usr/local/bin/pip3.7
/usr/local/bin/pydoc3
/usr/local/bin/pydoc3.7
/usr/local/bin/python3
/usr/local/bin/python3-config
/usr/local/bin/python3.7
/usr/local/bin/python3.7-config
/usr/local/bin/python3.7m
/usr/local/bin/python3.7m-config
/usr/local/bin/pyvenv
/usr/local/bin/pyvenv-3.7
/usr/local/bin/wheel3
/usr/local/share/man/man1/python3.1
/usr/local/share/man/man1/python3.7.1
/usr/local/lib/pkgconfig/python-3.7.pc
/usr/local/lib/pkgconfig/python-3.7m.pc
/usr/local/lib/pkgconfig/python3.pc
/usr/local/Frameworks/Python.framework/Headers
/usr/local/Frameworks/Python.framework/Python
/usr/local/Frameworks/Python.framework/Resources
/usr/local/Frameworks/Python.framework/Versions/3.7
/usr/local/Frameworks/Python.framework/Versions/Current
所以为了回答你的问题,在 python@3.7 和 python@3.9 之间切换的一种方法是使用 brew link
和 brew unlink
是的,如果你有与 python@3.7 兼容但不与 python@3.9 兼容的脚本,反之亦然。
还有一种方法可以同时使用不同版本的python。这在 brew link --dry-run python@3.7
的输出末尾进行了解释:
If you need to have this software first in your PATH instead consider running:
echo 'export PATH="/usr/local/opt/python@3.7/bin:$PATH"' >> ~/.zshrc
对于需要python@3.7的脚本,可以设置:
export PATH="/usr/local/opt/python@3.7/bin
对于需要python@3.9的脚本,你可以设置:
export PATH="/usr/local/opt/python@3.9/bin
希望这对您有所帮助。
关于python-3.x - 您需要在 brew 切换之前/之后运行 brew unlink/brew link 吗?,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/64833482/
我通常从以下位置获取代码:https://www.w3schools.com .这个代码还有一个 Accordion ; 但是,当我使用链接 -> 到 Accordion 时, Accordion 不
我见过的所有 JNI 指南(例如 JNI runtime linking )都建议我将 JNI 库链接到 libjvm.so: $ gcc -I${JAVA_HOME}/include -c -o t
实现以下目标的正确 URL 格式是什么: 使用 Universal Link 在 iOS 上的另一个应用程序中打开 Google map 应用程序。 根据两个坐标设置目的地:纬度和经度,并让用户选择交
我已经查看了 Microsoft 的 MSDN 和整个网络,但我仍然无法很好地了解它是什么。 这是否意味着已完成的程序在执行期间的不同时间加载 DLL,而不是在启动时一次性加载所有 DLL? 我完全偏
我有一个看起来像这样的 css: .browse-link A:link { color: #F6CA4C; text-decoration: none; } .browse-link
当我点击“产品”链接时,它突然指向#link。我怎样才能使它的外观看起来像滚动然后转到产品?请帮帮我。 vStudy function big(x){
我想在保存之前更改从输入字段中获取的值。 params[:link]['url'] = "www.facebook.com/redbull" 现在我只想将“redbull”放入数据库。以下代码失败,因
我正在使用链表编写程序(真是一场噩梦)。 无论如何,该程序的目的是输入 8 个字符,然后让程序将字符打印回给您,并以相反的顺序打印回字符,当然是使用链表。 到目前为止我已经明白了。它有很多错误(我认为
基本上,我删除了 anchor 按钮,因此链接窗口中不应该有指向 anchor 选项的链接。 有什么方法可以删除该下拉选项 ? 最佳答案 想通了 if ( dialogName == 'link' )
我的本地(和远程)SQL SERVER 2005 管理员都声称“允许链接服务器是一个安全问题”并禁止在此处使用它们。 (哈?) 无论如何,有没有办法在没有链接服务器的情况下做类似的事情? SELE
如果我有: linkedlist1= 1,2,3,4; 和 linkedlist2= 5,6,7; 如果我调用: linkedlist2.set(0,9999) 它会更改为 linkedlist2 =
首先,如果这个问题看起来很愚蠢,我很抱歉,但我仍在学习 React 和 html。所以问题是我的 react 代码中有一个按钮标签,它为我提供了一些关于进入我提供的特定链接的逻辑。我的 Button.
我将制作一个文本 block ,这样如果您单击一个单词,它就会被词汇替代品所替换。 例如“fearful-of-cats”是“ailurophobic”的词汇替代品,因为如果您在任何文本中将后者替换为
我有以下代码 Can you click me? 目标是我可以点击“你能点击我吗”框并转到 google 并在包含 div 的任何其他地方
这是一个案例: 默认情况下,如果我点击#2、#3、#4、#5,我将被重定向到#1。 如果我想在没有 #1 激活的情况下点击输入,我该如何修复 CSS? 提前
有没有什么快速的方法可以使 :visited 链接的颜色与链接本身的颜色相同? 例如: * {color:black} a:link {color:blue} a:visited {color:inh
我读到从 iOS 9 开始,引入了通用链接。请解释深层链接和通用链接之间的区别。我的目标是,一个链接将通过邮件发送给客户。让邮件说有一个项目 A 的报价和一个链接。单击链接时 如果安装了该应用程序,则
因此我们需要对 CSS anchor 伪类使用以下顺序 a:link { color: red } a:visited { color: blue } a:hover { color
我组件的当前路径是http://localhost:3000/dashboard/questionnaire/5bf79ff4c45a150015cef7a9在这个组件里面有 Financials 如
我 rsync 目录“Promotion”包含两台具有不同目录结构的机器之间的绝对符号链接(symbolic link)。因此绝对符号链接(symbolic link)在两台机器上都不起作用。为了使它
我是一名优秀的程序员,十分优秀!