- html - 出于某种原因,IE8 对我的 Sass 文件中继承的 html5 CSS 不友好?
- JMeter 在响应断言中使用 span 标签的问题
- html - 在 :hover and :active? 上具有不同效果的 CSS 动画
- html - 相对于居中的 html 内容固定的 CSS 重复背景?
我使用代码优先,我使用 Elmah。
我每次重新创建数据库时,必须手动从文件中添加代码:
/*
ELMAH - Error Logging Modules and Handlers for ASP.NET
Copyright (c) 2004-9 Atif Aziz. All rights reserved.
Author(s):
Atif Aziz, http://www.raboof.com
Phil Haacked, http://haacked.com
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
-- ELMAH DDL script for Microsoft SQL Server 2000 or later.
-- $Id: SQLServer.sql 677 2009-09-29 18:02:39Z azizatif $
DECLARE @DBCompatibilityLevel INT
DECLARE @DBCompatibilityLevelMajor INT
DECLARE @DBCompatibilityLevelMinor INT
SELECT
@DBCompatibilityLevel = cmptlevel
FROM
master.dbo.sysdatabases
WHERE
name = DB_NAME()
IF @DBCompatibilityLevel <> 80
BEGIN
SELECT @DBCompatibilityLevelMajor = @DBCompatibilityLevel / 10,
@DBCompatibilityLevelMinor = @DBCompatibilityLevel % 10
PRINT N'
===========================================================================
WARNING!
---------------------------------------------------------------------------
This script is designed for Microsoft SQL Server 2000 (8.0) but your
database is set up for compatibility with version '
+ CAST(@DBCompatibilityLevelMajor AS NVARCHAR(80))
+ N'.'
+ CAST(@DBCompatibilityLevelMinor AS NVARCHAR(80))
+ N'. Although
the script should work with later versions of Microsoft SQL Server,
you can ensure compatibility by executing the following statement:
ALTER DATABASE ['
+ DB_NAME()
+ N']
SET COMPATIBILITY_LEVEL = 80
If you are hosting ELMAH in the same database as your application
database and do not wish to change the compatibility option then you
should create a separate database to host ELMAH where you can set the
compatibility level more freely.
If you continue with the current setup, please report any compatibility
issues you encounter over at:
http://code.google.com/p/elmah/issues/list
===========================================================================
'
END
GO
/* ------------------------------------------------------------------------
TABLES
------------------------------------------------------------------------ */
CREATE TABLE [dbo].[ELMAH_Error]
(
[ErrorId] UNIQUEIDENTIFIER NOT NULL,
[Application] NVARCHAR(60) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[Host] NVARCHAR(50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[Type] NVARCHAR(100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[Source] NVARCHAR(60) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[Message] NVARCHAR(500) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[User] NVARCHAR(50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[StatusCode] INT NOT NULL,
[TimeUtc] DATETIME NOT NULL,
[Sequence] INT IDENTITY (1, 1) NOT NULL,
[AllXml] NTEXT COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL
)
ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
ALTER TABLE [dbo].[ELMAH_Error] WITH NOCHECK ADD
CONSTRAINT [PK_ELMAH_Error] PRIMARY KEY NONCLUSTERED ([ErrorId]) ON [PRIMARY]
GO
ALTER TABLE [dbo].[ELMAH_Error] ADD
CONSTRAINT [DF_ELMAH_Error_ErrorId] DEFAULT (NEWID()) FOR [ErrorId]
GO
CREATE NONCLUSTERED INDEX [IX_ELMAH_Error_App_Time_Seq] ON [dbo].[ELMAH_Error]
(
[Application] ASC,
[TimeUtc] DESC,
[Sequence] DESC
)
ON [PRIMARY]
GO
/* ------------------------------------------------------------------------
STORED PROCEDURES
------------------------------------------------------------------------ */
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
CREATE PROCEDURE [dbo].[ELMAH_GetErrorXml]
(
@Application NVARCHAR(60),
@ErrorId UNIQUEIDENTIFIER
)
AS
SET NOCOUNT ON
SELECT
[AllXml]
FROM
[ELMAH_Error]
WHERE
[ErrorId] = @ErrorId
AND
[Application] = @Application
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
CREATE PROCEDURE [dbo].[ELMAH_GetErrorsXml]
(
@Application NVARCHAR(60),
@PageIndex INT = 0,
@PageSize INT = 15,
@TotalCount INT OUTPUT
)
AS
SET NOCOUNT ON
DECLARE @FirstTimeUTC DATETIME
DECLARE @FirstSequence INT
DECLARE @StartRow INT
DECLARE @StartRowIndex INT
SELECT
@TotalCount = COUNT(1)
FROM
[ELMAH_Error]
WHERE
[Application] = @Application
-- Get the ID of the first error for the requested page
SET @StartRowIndex = @PageIndex * @PageSize + 1
IF @StartRowIndex <= @TotalCount
BEGIN
SET ROWCOUNT @StartRowIndex
SELECT
@FirstTimeUTC = [TimeUtc],
@FirstSequence = [Sequence]
FROM
[ELMAH_Error]
WHERE
[Application] = @Application
ORDER BY
[TimeUtc] DESC,
[Sequence] DESC
END
ELSE
BEGIN
SET @PageSize = 0
END
-- Now set the row count to the requested page size and get
-- all records below it for the pertaining application.
SET ROWCOUNT @PageSize
SELECT
errorId = [ErrorId],
application = [Application],
host = [Host],
type = [Type],
source = [Source],
message = [Message],
[user] = [User],
statusCode = [StatusCode],
time = CONVERT(VARCHAR(50), [TimeUtc], 126) + 'Z'
FROM
[ELMAH_Error] error
WHERE
[Application] = @Application
AND
[TimeUtc] <= @FirstTimeUTC
AND
[Sequence] <= @FirstSequence
ORDER BY
[TimeUtc] DESC,
[Sequence] DESC
FOR
XML AUTO
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
CREATE PROCEDURE [dbo].[ELMAH_LogError]
(
@ErrorId UNIQUEIDENTIFIER,
@Application NVARCHAR(60),
@Host NVARCHAR(30),
@Type NVARCHAR(100),
@Source NVARCHAR(60),
@Message NVARCHAR(500),
@User NVARCHAR(50),
@AllXml NTEXT,
@StatusCode INT,
@TimeUtc DATETIME
)
AS
SET NOCOUNT ON
INSERT
INTO
[ELMAH_Error]
(
[ErrorId],
[Application],
[Host],
[Type],
[Source],
[Message],
[User],
[AllXml],
[StatusCode],
[TimeUtc]
)
VALUES
(
@ErrorId,
@Application,
@Host,
@Type,
@Source,
@Message,
@User,
@AllXml,
@StatusCode,
@TimeUtc
)
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
db.Database.ExecuteSqlCommand
但我收到了很多表格错误:
Incorrect syntax near 'GO'.
Incorrect syntax near the keyword 'ALTER'.
Incorrect syntax near the keyword 'ALTER'.
Incorrect syntax near 'GO'.
Incorrect syntax near the keyword 'SET'.
Incorrect syntax near 'GO'.
Incorrect syntax near 'GO'.
Must declare the scalar variable "@ErrorId".
Incorrect syntax near 'GO'.
Incorrect syntax near 'GO'.
Incorrect syntax near 'GO'.
Incorrect syntax near 'GO'.
Must declare the scalar variable "@TotalCount".
Must declare the scalar variable "@PageIndex".
Must declare the scalar variable "@TotalCount".
Must declare the scalar variable "@Application".
Must declare the scalar variable "@PageSize".
Must declare the scalar variable "@PageSize".
Must declare the scalar variable "@Application".
Incorrect syntax near 'GO'.
Incorrect syntax near 'GO'.
Incorrect syntax near 'GO'.
Incorrect syntax near 'GO'.
Must declare the scalar variable "@ErrorId".
Incorrect syntax near 'GO'.
Incorrect syntax near 'GO'.
最佳答案
尝试这种迁移,记住它希望所有 GO 语句都在一行上,并且文件使用\r\n 行结尾。我使用 elmah.sqlserver NuGet 包安装了 Elmah,它将 SqlServer.sql 文件放在适当的位置。您需要更改资源名称以匹配您的项目。
public partial class Elmah : DbMigration
{
public override void Up()
{
var sqlStream = Assembly.GetExecutingAssembly().GetManifestResourceStream("MyProject.App_Readme.Elmah.SqlServer.sql");
using(var sqlStreamReader = new StreamReader(sqlStream))
{
string sqlScript = sqlStreamReader.ReadToEnd();
ExecuteSqlScript(sqlScript);
}
}
void ExecuteSqlScript(string sqlScript)
{
string[] sql = sqlScript.Split(new[] {"\r\nGO\r\n"}, StringSplitOptions.RemoveEmptyEntries);
foreach (var sqlCommand in sql)
{
if (!string.IsNullOrWhiteSpace(sqlCommand))
Sql(sqlCommand);
}
}
public override void Down()
{
DropTable("ELMAH_Error");
Sql("DROP PROCEDURE ELMAH_GetErrorXml");
Sql("DROP PROCEDURE ELMAH_GetErrorsXml");
Sql("DROP PROCEDURE ELMAH_LogError");
}
}
关于sql - 如何添加代码初始化sql数据库,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/10621322/
我的问题是如何在 python 中创建一个简单的数据库。我的例子是: User = { 'Name' : {'Firstname', 'Lastname'}, 'Address' : {'Street
我需要创建一个与远程数据库链接的应用程序! mysql 是最好的解决方案吗? Sqlite 是唯一的本地解决方案吗? 我使用下面的方法,我想知道它是否是最好的方法! NSString *evento
给定两台 MySQL 服务器,一台本地,一台远程。两者都有一个包含表 bohica 的数据库 foobar。本地服务器定义了用户 'myadmin'@'%' 和 'myadmin'@'localhos
我有以下灵活的搜索查询 Select {vt:code},{vt:productcode},{vw:code},{vw:productcode} from {abcd AS vt JOIN wxyz
好吧,我的电脑开始运行有点缓慢,所以我重置了 Windows,保留了我的文件。因为我的大脑还没有打开,所以我忘记事先备份我的 MySQL 数据库。我仍然拥有所有原始文件,因此我实际上仍然拥有数据库,但
如何将我的 Access 数据库 (.accdb) 转换为 SQLite 数据库 (.sqlite)? 请,任何帮助将不胜感激。 最佳答案 1)如果要转换 db 的结构,则应使用任何 DB 建模工具:
系统检查发现了一些问题: 警告:?:(mysql.W002)未为数据库连接“默认”设置 MySQL 严格模式 提示:MySQL 的严格模式通过将警告升级为错误来修复 MySQL 中的许多数据完整性问题
系统检查发现了一些问题: 警告:?:(mysql.W002)未为数据库连接“默认”设置 MySQL 严格模式 提示:MySQL 的严格模式通过将警告升级为错误来修复 MySQL 中的许多数据完整性问题
我想在相同的 phonegap 应用程序中使用 android 数据库。 更多说明: 我创建了 phonegap 应用程序,但 phonegap 应用程序不支持服务,所以我们已经在 java 中为 a
Time Tracker function clock() { var mytime = new Date(); var seconds
我需要在现有项目上实现一些事件的显示。我无法更改数据库结构。 在我的 Controller 中,我(从 ajax 请求)传递了一个时间戳,并且我需要显示之前的 8 个事件。因此,如果时间戳是(转换后)
我有一个可以收集和显示各种测量值的产品(不会详细介绍)。正如人们所期望的那样,显示部分是一个数据库+建立在其之上的网站(使用 Symfony)。 但是,我们可能还会创建一个 API 来向第三方公开数据
我们将 SQL Server 从 Azure VM 迁移到 Azure SQL 数据库。 Azure VM 为 DS2_V2、2 核、7GB RAM、最大 6400 IOPS Azure SQL 数据
我正在开发一个使用 MongoDB 数据库的程序,但我想问在通过 Java 执行 SQL 时是否可以使用内部数据库进行测试,例如 H2? 最佳答案 你可以尝试使用Testcontainers Test
已关闭。此问题不符合Stack Overflow guidelines 。目前不接受答案。 已关闭 9 年前。 此问题似乎与 a specific programming problem, a sof
我正在尝试使用 MSI 身份验证(无需用户名和密码)从 Azure 机器学习服务连接 Azure SQL 数据库。 我正在尝试在 Azure 机器学习服务上建立机器学习模型,目的是我需要数据,这就是我
我在我的 MySQL 数据库中使用这个查询来查找 my_column 不为空的所有行: SELECT * FROM my_table WHERE my_column != ""; 不幸的是,许多行在
我有那个基地:http://sqlfiddle.com/#!2/e5a24/2这是 WordPress 默认模式的简写。我已经删除了该示例不需要的字段。 如您所见,我的结果是“类别 1”的两倍。我喜欢
我有一张这样的 table : mysql> select * from users; +--------+----------+------------+-----------+ | userid
我有表: CREATE TABLE IF NOT EXISTS `category` ( `id` int(11) NOT NULL, `name` varchar(255) NOT NULL
我是一名优秀的程序员,十分优秀!