- html - 出于某种原因,IE8 对我的 Sass 文件中继承的 html5 CSS 不友好?
- JMeter 在响应断言中使用 span 标签的问题
- html - 在 :hover and :active? 上具有不同效果的 CSS 动画
- html - 相对于居中的 html 内容固定的 CSS 重复背景?
我正在用 pgf 编写一些形状,我并不真正了解它是如何工作的,但我设法阅读了文档。
\pgfdeclareshape{reg}{
% The 'minimum width' and 'minimum height' keys, not the content, determine
% the size
\savedanchor\northeast{%
\pgfmathsetlength\pgf@x{\pgfshapeminwidth}%
\pgfmathsetlength\pgf@y{\pgfshapeminheight}%
\pgf@x=0.11\pgf@x
\pgf@y=0.15\pgf@y
}
% This is redundant, but makes some things easier:
\savedanchor\southwest{%
\pgfmathsetlength\pgf@x{\pgfshapeminwidth}%
\pgfmathsetlength\pgf@y{\pgfshapeminheight}%
\pgf@x=-0.11\pgf@x
\pgf@y=-0.15\pgf@y
}
% Inherit from rectangle
\inheritanchorborder[from=rectangle]
% Define same anchor a normal rectangle has
\anchor{center}{\pgfpointorigin}
\anchor{north}{\northeast \pgf@x=0pt}
\anchor{east}{\northeast \pgf@y=0pt}
\anchor{south}{\southwest \pgf@x=0pt}
\anchor{west}{\southwest \pgf@y=0pt}
\anchor{north east}{\northeast}
\anchor{north west}{\northeast \pgf@x=-\pgf@x}
\anchor{south west}{\southwest}
\anchor{south east}{\southwest \pgf@x=-\pgf@x}
\anchor{text}{
\pgfpointorigin
\advance\pgf@x by -.5\wd\pgfnodeparttextbox%
\advance\pgf@y by -.5\ht\pgfnodeparttextbox%
\advance\pgf@y by +.5\dp\pgfnodeparttextbox%
}
% Define anchors for signal ports
\anchor{CLK}{
\pgf@process{\northeast}%
\pgf@x=0\pgf@x%
\pgf@y=1\pgf@y%
}
\anchor{PC}{
\pgf@process{\northeast}%
\pgf@x=-2.5\pgf@x%
\pgf@y=0\pgf@y%
}
\anchor{PCS}{
\pgf@process{\northeast}%
\pgf@x=2.5\pgf@x%
\pgf@y=0\pgf@y%
}
% Draw the rectangle box and the port labels
\backgroundpath{
% Rectangle box
\pgfpathrectanglecorners{\southwest}{\northeast}
% Drawing Triangle for clock input
% upper left x
\southwest \pgf@xa=\pgf@x
\northeast \pgf@ya=\pgf@y \pgf@yb=\pgf@y \pgf@xb=\pgf@x
\pgf@anchor@reg@CLK
\pgf@xc=\pgf@x \pgf@yc=\pgf@y
\pgfmathsetlength\pgf@x{1.3ex}
\advance\pgf@xa by .15mm
\advance\pgf@xb by -.15mm
\advance\pgf@yc by -\pgf@x
\pgfpathmoveto{\pgfpoint{\pgf@xa}{\pgf@ya}}
\pgfpathlineto{\pgfpoint{\pgf@xb}{\pgf@yb}}
\pgfpathlineto{\pgfpoint{\pgf@xc}{\pgf@yc}}
\pgfclosepath
\tikzset{flip flop/port labels} % Use font from this style
\tikz@textfont
%Drawing CLK circuit
\pgf@anchor@reg@CLK
\pgf@xa=\pgf@x \pgf@ya=\pgf@y
\pgf@xb=\pgf@x \pgf@yb=\pgf@y
\pgfmathsetlength\pgf@x{1.8ex}
\advance\pgf@yb by \pgf@x
\pgfpathmoveto{\pgfpoint{\pgf@xa}{\pgf@ya}}
\pgfpathlineto{\pgfpoint{\pgf@xb}{\pgf@yb}}
%Draw clock label
\pgf@anchor@reg@CLK\pgftext[base,at={\pgfpoint{\pgf@x}{\pgf@y}}]{\raisebox{2.5ex}{CLK}}
%Drawing PC circuit
\pgf@anchor@reg@PC
\pgf@ya=\pgf@y \pgf@yb=\pgf@y \pgf@xa=\pgf@x
\pgf@anchor@reg@west
\pgf@xb=\pgf@x
%\pgfmathsetlength\pgf@x{2.7ex}
%\advance\pgf@xb by \pgf@x
\pgfpathmoveto{\pgfpoint{\pgf@xa}{\pgf@ya}}
\pgfpathlineto{\pgfpoint{\pgf@xb}{\pgf@yb}}
\pgf@anchor@reg@PC\pgftext[base,at={\pgfpoint{\pgf@x+0.5ex}{\pgf@y}}]{\raisebox{.5ex}{PC}}
%Drawing PC' circuit
\pgf@anchor@reg@PCS
\pgf@ya=\pgf@y \pgf@yb=\pgf@y\pgf@xa=\pgf@x
\pgf@anchor@reg@east
\pgf@xb=\pgf@x
%\pgfmathsetlength\pgf@x{2.5ex}
%\advance\pgf@xb by \pgf@x
\pgfpathmoveto{\pgfpoint{\pgf@xa}{\pgf@ya}}
\pgfpathlineto{\pgfpoint{\pgf@xb}{\pgf@yb}}
\pgf@anchor@reg@PCS\pgftext[base,at={\pgfpoint{\pgf@x}{\pgf@y}}]{\raisebox{.5ex}{PC'}}
}
}
我在这里创建了一个形状,在外面有一些连接点,它实际上效果很好。但是我真的很想在创建这个形状时有一个参数,这样我就可以指定端口的数量。
比如像这样
\begin{tikzpicture}
\node [reg,black!50,ports=3] (PC) at (0,0) {};
\end{tikzpicture}
但我在文档中找不到允许自定义参数的内容。我还想将 anchor 命名为 A1、A2 和 A3,但我似乎无法在名称中添加数字,即使在文档中它明确表示像“1”和“::”这样的名称应该没问题,但仍然“A1”是。
如果有人对如何执行此操作有任何想法,我将感谢您的帮助。也许还有一些关于使用 pgf 创建形状的更好引用。
为了编辑 tex 文件,我使用 Overleaf 和 pdflatex。
编辑:我现在发现您可以使用 \pgfkeys
向形状添加参数,但它们似乎无法正常工作,我真的不知道该怎么做。
\def\microarchbasekey{/tikz/microarch}
\pgfkeys{\microarchbasekey/.is family}
\pgfdeclareshape{mux}{
\pgfkeys{\microarchbasekey,inputs/.initial=2,spacing/.initial=5}
\savedmacro{\numpins}{
\def\numpins{\pgfkeysvalueof{\microarchbasekey/inputs}}
}
\saveddimen{\spacing}{
\pgf@x = \pgfkeysvalueof{\microarchbasekey/spacing}
}
%a lot of code down there
}
但它给了我以下错误
A number should have been here; I inserted `0'.
(If you can't figure out why I needed to see a number,
look up `weird error' in the index to The TeXbook.)
但我找不到代码的缺失部分。
最佳答案
可能这是一个更适合 TeX/LaTeX site 的问题, 但无论如何...
关键的事情如下:
为参数添加键。注意层次结构,node
需要 /tikz
系列下的键:
%
% better to create a family, but as an example...
\tikzset{flip flop/port labels/.initial={\tiny}}
%
% number of ports
\tikzset{ports/.initial=4}
%
% we need a counter
\newcount\tmp@a
添加稳定(链接到特定节点,而不是通用形状)参数,所有这些都是计算 anchor 位置所需的:
% you have to save the relevant parameters as \savedmacro
\savedmacro\numports{
\edef\numports{\pgfkeysvalueof{/tikz/ports}}%
}
% and \saveddimen
\saveddimen\pinsdelta{
% you can't use savedmacros nor savedanchors here (bummer!)
\edef\numports{\pgfkeysvalueof{/tikz/ports}}%
\pgfmathsetlength\pgf@x{0.22*\pgfshapeminheight/(\numports+1)}%
}
在形状定义中,您必须使用技巧添加 anchor --- anchor 必须添加到形状内部函数中。危险,因为开发人员可以在将来更改它(它已经发生了),但我不知道其他办法。
% create input anchors
% this touch internal things, so beware...
% anchors are named pgf@anchor@<name-of-the-shape>@<name of the anchors>
\pgfutil@g@addto@macro\pgf@sh@s@reg{%
\tmp@a=\numports\relax
\pgfmathloop%
\ifnum\pgfmathcounter>\tmp@a%
\else%
% assign the anchor "in \pgfmathcounter" to the macro \reg@port with the number as argument
\expandafter\xdef\csname pgf@anchor@reg@in \pgfmathcounter\endcsname{%
\noexpand\reg@port{\pgfmathcounter}% defined below
}%
% \typeout{YAY\space\pgfmathcounter}
\repeatpgfmathloop%
}
定义计算变量 anchor 的具体函数。您必须在此处仅使用 \saved...
类型的参数,否则,您的 anchor 将使用参数的最后一个值,而不是节点指定的正确值。
\def\reg@port#1{%
% this macro has the function to return the position of the anchor
% it must use only \savedanchors and \savedmacros
% the parameter is the number of the anchor (see above)
\northeast
\pgf@x=-\pgf@x
\pgf@ya=\pgf@y
\pgfmathsetlength{\pgf@y}{\pgf@ya-(#1+0.5)*\pinsdelta}%
}
现在,我不明白你是如何画出你的形状的,所以 anchor 不在它们应该去的地方,但是好吧:
我的完整代码在这里:
\documentclass[border=10pt]{standalone}
\usepackage{tikz}
\makeatletter
%
% better to create a family, but as an example...
\tikzset{flip flop/port labels/.initial={\tiny}}
%
% number of ports
\tikzset{ports/.initial=4}
%
% we need a counter
\newcount\tmp@a
\pgfdeclareshape{reg}{
% you have to save the relevant parameters as \savedmacro
\savedmacro\numports{
\edef\numports{\pgfkeysvalueof{/tikz/ports}}%
}
% and \saveddimen
\saveddimen\pinsdelta{
% you can't use savedmacros nor savedanchors here (bummer!)
\edef\numports{\pgfkeysvalueof{/tikz/ports}}%
\pgfmathsetlength\pgf@x{0.22*\pgfshapeminheight/(\numports+1)}%
}
% The 'minimum width' and 'minimum height' keys, not the content, determine
% the size
\savedanchor\northeast{%
\pgfmathsetlength\pgf@x{\pgfshapeminwidth}%
\pgfmathsetlength\pgf@y{\pgfshapeminheight}%
\pgf@x=0.11\pgf@x
\pgf@y=0.15\pgf@y
}
% This is redundant, but makes some things easier:
\savedanchor\southwest{%
\pgfmathsetlength\pgf@x{\pgfshapeminwidth}%
\pgfmathsetlength\pgf@y{\pgfshapeminheight}%
\pgf@x=-0.11\pgf@x
\pgf@y=-0.15\pgf@y
}
% Inherit from rectangle
\inheritanchorborder[from=rectangle]
% Define same anchor a normal rectangle has
\anchor{center}{\pgfpointorigin}
\anchor{north}{\northeast \pgf@x=0pt}
\anchor{east}{\northeast \pgf@y=0pt}
\anchor{south}{\southwest \pgf@x=0pt}
\anchor{west}{\southwest \pgf@y=0pt}
\anchor{north east}{\northeast}
\anchor{north west}{\northeast \pgf@x=-\pgf@x}
\anchor{south west}{\southwest}
\anchor{south east}{\southwest \pgf@x=-\pgf@x}
\anchor{text}{
\pgfpointorigin
\advance\pgf@x by -.5\wd\pgfnodeparttextbox%
\advance\pgf@y by -.5\ht\pgfnodeparttextbox%
\advance\pgf@y by +.5\dp\pgfnodeparttextbox%
}
% Define anchors for signal ports
\anchor{CLK}{
\pgf@process{\northeast}%
\pgf@x=0\pgf@x%
\pgf@y=1\pgf@y%
}
\anchor{PC}{
\pgf@process{\northeast}%
\pgf@x=-2.5\pgf@x%
\pgf@y=0\pgf@y%
}
\anchor{PCS}{
\pgf@process{\northeast}%
\pgf@x=2.5\pgf@x%
\pgf@y=0\pgf@y%
}
% Draw the rectangle box and the port labels
\backgroundpath{
% Rectangle box
\pgfpathrectanglecorners{\southwest}{\northeast}
% Drawing Triangle for clock input
% upper left x
\southwest \pgf@xa=\pgf@x
\northeast \pgf@ya=\pgf@y \pgf@yb=\pgf@y \pgf@xb=\pgf@x
\pgf@anchor@reg@CLK
\pgf@xc=\pgf@x \pgf@yc=\pgf@y
\pgfmathsetlength\pgf@x{1.3ex}
\advance\pgf@xa by .15mm
\advance\pgf@xb by -.15mm
\advance\pgf@yc by -\pgf@x
\pgfpathmoveto{\pgfpoint{\pgf@xa}{\pgf@ya}}
\pgfpathlineto{\pgfpoint{\pgf@xb}{\pgf@yb}}
\pgfpathlineto{\pgfpoint{\pgf@xc}{\pgf@yc}}
\pgfclosepath
\tikzset{flip flop/port labels} % Use font from this style
\tikz@textfont
%Drawing CLK circuit
\pgf@anchor@reg@CLK
\pgf@xa=\pgf@x \pgf@ya=\pgf@y
\pgf@xb=\pgf@x \pgf@yb=\pgf@y
\pgfmathsetlength\pgf@x{1.8ex}
\advance\pgf@yb by \pgf@x
\pgfpathmoveto{\pgfpoint{\pgf@xa}{\pgf@ya}}
\pgfpathlineto{\pgfpoint{\pgf@xb}{\pgf@yb}}
%Draw clock label
\pgf@anchor@reg@CLK\pgftext[base,at={\pgfpoint{\pgf@x}{\pgf@y}}]{\raisebox{2.5ex}{CLK}}
%Drawing PC circuit
\pgf@anchor@reg@PC
\pgf@ya=\pgf@y \pgf@yb=\pgf@y \pgf@xa=\pgf@x
\pgf@anchor@reg@west
\pgf@xb=\pgf@x
%\pgfmathsetlength\pgf@x{2.7ex}
%\advance\pgf@xb by \pgf@x
\pgfpathmoveto{\pgfpoint{\pgf@xa}{\pgf@ya}}
\pgfpathlineto{\pgfpoint{\pgf@xb}{\pgf@yb}}
\pgf@anchor@reg@PC\pgftext[base,at={\pgfpoint{\pgf@x+0.5ex}{\pgf@y}}]{\raisebox{.5ex}{PC}}
%Drawing PC' circuit
\pgf@anchor@reg@PCS
\pgf@ya=\pgf@y \pgf@yb=\pgf@y\pgf@xa=\pgf@x
\pgf@anchor@reg@east
\pgf@xb=\pgf@x
%\pgfmathsetlength\pgf@x{2.5ex}
%\advance\pgf@xb by \pgf@x
\pgfpathmoveto{\pgfpoint{\pgf@xa}{\pgf@ya}}
\pgfpathlineto{\pgfpoint{\pgf@xb}{\pgf@yb}}
\pgf@anchor@reg@PCS\pgftext[base,at={\pgfpoint{\pgf@x}{\pgf@y}}]{\raisebox{.5ex}{PC'}}
}
% create input anchors
% this touch internal things, so beware...
% anchors are named pgf@anchor@<name-of-the-shape>@<name of the anchors>
\pgfutil@g@addto@macro\pgf@sh@s@reg{%
\tmp@a=\numports\relax
\pgfmathloop%
\ifnum\pgfmathcounter>\tmp@a%
\else%
% assign the anchor "in \pgfmathcounter" to the macro \reg@port with the number as argument
\expandafter\xdef\csname pgf@anchor@reg@in \pgfmathcounter\endcsname{%
\noexpand\reg@port{\pgfmathcounter}% defined below
}%
% \typeout{YAY\space\pgfmathcounter}
\repeatpgfmathloop%
}
}
%
\def\reg@port#1{%
% this macro has the function to return the position of the anchor
% it must use only \savedanchors and \savedmacros
% the parameter is the number of the anchor (see above)
\northeast
\pgf@x=-\pgf@x
\pgf@ya=\pgf@y
\pgfmathsetlength{\pgf@y}{\pgf@ya-(#1+0.5)*\pinsdelta}%
}
\makeatother
%%% handy macro to show the anchors
\def\showcoord(#1)<#2:#3>{%
node[circle, red, draw, inner sep=1pt,pin={%
[red, inner sep=0.5pt, font=\small,
pin distance=#3cm, pin edge={red, }%
]#2:#1}](#1){}}
\begin{document}
\begin{tikzpicture}
\node [draw,reg,minimum width=3cm, minimum height=3cm, black!50] (PC1) at (0,0) {};
\path (PC1.north west) \showcoord(NW)<45:0.2>;
\node [draw, reg,black!50,minimum width=3cm, minimum height=5cm, ports=6, blue] (PC2) at (3,0) {};
\foreach \p in {1,...,4} \path(PC1.in \p) \showcoord(in \p)<145:0.3>;
\foreach \p in {1,...,6} \path(PC2.in \p) \showcoord(in \p)<145:0.3>;
\end{tikzpicture}
\end{document}
关于parameters - Latex Tikz/Pgf 声明带有参数的形状和带有数字的 anchor ,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/61729168/
fiddle :http://jsfiddle.net/rtucgv74/ 我正在尝试将第一个字符与 3 位数字匹配。所以下面的代码应该提醒f234。但反而返回 null ? 源代码: var reg
复制代码 代码如下: Dim strOk,strNo strOk = "12312321$12
我想找 {a number} / { a number } / {a string}模式。我可以得到number / number工作,但是当我添加 / string它不是。 我试图找到的例子: 15
我,我正在做一个模式正则表达式来检查字符串是否是: 数字.数字.数字,如下所示: 1.1.1 0.20.2 58.55541.5221 在java中我使用这个: private static Patt
我有一个字符串,我需要检查它是否在字符串的末尾包含一个数字/数字,并且需要将该数字/数字递增到字符串末尾 +1 我会得到下面的字符串 string2 = suppose_name_1 string3
我正在寻找一个正则表达式 (数字/数字),如(1/2) 数字必须是 1-3 位数字。我使用 Java。 我认为我的问题比正则表达式更深。我无法让这个工作 String s ="(1/15)";
谁能帮我理解为什么我在使用以下代码时会出现类型错误: function sumOfTwoNumbersInArray(a: [number, number]) { return a[0] +
我看到有些人过去也遇到过类似的问题,但他们似乎只是不同,所以解决方案也有所不同。所以这里是: 我正在尝试在 Google Apps 脚本中返回工作表的已知尺寸范围,如下所示: var myRange
我试图了解python中的正则表达式模块。我试图让我的程序从用户输入的一行文本中匹配以下模式: 8-13 之间的数字“/” 0-15 之间的数字 例如:8/2、11/13、10/9 等。 我想出的模式
简单地说,我当前正在开发的程序要求我拆分扫描仪输入(例如:2 个火腿和奶酪 5.5)。它应该读取杂货订单并将其分成三个数组。我应该使用 string.split 并能够将此输入分成三部分,而不管中间字
(number) & (-number) 是什么意思?我已经搜索过了,但无法找到含义 我想在 for 循环中使用 i & (-i),例如: for (i = 0; i 110000 .对于i没有高于
需要将图像ID设置为数字 var number = $(this).attr('rel'); number = parseInt(number); $('#carousel .slid
我有一个函数,我想确保它接受一个字符串,后跟一个数字。并且可选地,更多的字符串数字对。就像一个元组,但“无限”次: const fn = (...args: [string, number] | [s
我想复制“可用”输入数字的更改并将其添加或减去到“总计”中 如果此人将“可用”更改为“3”,则“总计”将变为“9”。 如果用户将“可用”更改为“5”,则“总计”将变为“11”。 $('#id1').b
我有一个与 R 中的断线相关的简单问题。 我正在尝试粘贴,但在获取(字符/数字)之间的断线时遇到问题。请注意,这些值包含在向量中(V1=81,V2=55,V3=25)我已经尝试过这段代码: cat(p
很难说出这里问的是什么。这个问题是含糊的、模糊的、不完整的、过于宽泛的或修辞性的,无法以目前的形式得到合理的回答。如需帮助澄清此问题以便重新打开它,visit the help center 。 已关
我在 Typescript 中收到以下错误: Argument of type 'number[]' is not assignable to parameter of type 'number' 我
在本教程中,您将通过示例了解JavaScript 数字。 在JavaScript中,数字是基本数据类型。例如, const a = 3; const b = 3.13; 与其他一些编程语言不同
我在 MDN Reintroduction to JavaScript 上阅读JavaScript 数字只是浮点精度类型,JavaScript 中没有整数。然而 JavaScript 有两个函数,pa
我们在 Excel 中管理库存。我知道这有点过时,但我们正在发展商业公司,我们所有的钱都被困在业务上,没有钱投资 IT。 所以我想知道我可以用Excel自动完成产品编号的方式进行编程吗? 这是一个产品
我是一名优秀的程序员,十分优秀!