cephadm:无法将节点添加到 ceph 集群(错误 EINVAL:无法连接到主机)

Question

我按照 https://docs.ceph.com/en/latest/cephadm/install/ 的以下步骤在 Centos 8.1 上设置了一个 ceph 集群

curl --silent --remote-name --location https://github.com/ceph/ceph/raw/octopus/src/cephadm/cephadm
chmod +x cephadm
./cephadm add-repo --release octopus
./cephadm install

执行上述命令后，我发现 ceph 需要 docker 或 podman 才能运行。所以我从 https://docs.docker.com/engine/install/centos/ 安装了社区版的 docker 并继续下面的步骤。

./cephadm install
mkdir -p /etc/ceph
cephadm bootstrap --mon-ip *ip_of_the_current_machine (host1)*
cephadm install ceph-common
ssh-copy-id -f -i /etc/ceph/ceph.pub root@host2*
ceph orch host add host2

上面的命令失败并出现错误

[root@host1 home]# ceph orch host add host2
INFO:cephadm:Inferring fsid 12345678-2345-6789-1011-000129110013
INFO:cephadm:Inferring config /var/lib/ceph/12345678-2345-6789-1011-000129110013/mon.host1/config
INFO:cephadm:Using recent ceph image ceph/ceph:v15
Error EINVAL: Failed to connect to host2 (host2).
Check that the host is reachable and accepts connections using the cephadm SSH key
 
you may want to run:
> ceph cephadm get-ssh-config > ssh_config
> ceph config-key get mgr/cephadm/ssh_identity_key > key
> ssh -F ssh_config -i key root@host2

我可以使用上述步骤登录到 host2。
有人可以告诉我是否做错了什么。我该如何解决这个问题。

Answer 1

因此，经过几天的调试，我发现我想添加的节点上缺少 python3。我所要做的就是使用命令检查最后几个日志。

ceph log last cephadm

这给出了以下日志消息。

Traceback (most recent call last):
  File "/usr/share/ceph/mgr/cephadm/module.py", line 1036, in _remote_connection
    raise execnet.gateway_bootstrap.HostNotFound(msg)
execnet.gateway_bootstrap.HostNotFound: Can't communicate with remote host `host2`, possibly because python3 is not installed there: cannot send (already closed?)
 
The above exception was the direct cause of the following exception:
 
Traceback (most recent call last):
  File "/usr/share/ceph/mgr/orchestrator/_interface.py", line 295, in _finalize
    next_result = self._on_complete(self._value)
  File "/usr/share/ceph/mgr/cephadm/module.py", line 103, in <lambda>
    return CephadmCompletion(on_complete=lambda _: f(*args, **kwargs))
  File "/usr/share/ceph/mgr/cephadm/module.py", line 1201, in add_host
    return self._add_host(spec)
  File "/usr/share/ceph/mgr/cephadm/module.py", line 1187, in _add_host
    error_ok=True, no_fsid=True)
  File "/usr/share/ceph/mgr/cephadm/module.py", line 1104, in _run_cephadm
    with self._remote_connection(host, addr) as tpl:
  File "/lib64/python3.6/contextlib.py", line 81, in __enter__
    return next(self.gen)
  File "/usr/share/ceph/mgr/cephadm/module.py", line 1055, in _remote_connection
    raise OrchestratorError(msg) from e
orchestrator._interface.OrchestratorError: Failed to connect to host2 (host2).
Check that the host is reachable and accepts connections using the cephadm SSH key

接下来添加我运行的节点。

ceph orch host add host2 ip_address