if-statement - 批处理文件:(目前是意外情况

Question

我收到此错误：


（目前无法预料


接受a的值后，将发生错误。我尝试并检查了可能导致此类问题的空值，但未成功。

echo off
cls
title ~USB Wizard~
echo What do you want to do?
echo 1.Enable/Disable USB Storage Devices.
echo 2.Enable/Disable Writing Data onto USB Storage.
echo 3.~Yet to come~.

set "a=%globalparam1%"
goto :aCheck
:aPrompt
set /p "a=Enter Choice: "
:aCheck
if "%a%"=="" goto :aPrompt
echo %a%

IF %a%==2 (
title USB WRITE LOCK
echo What do you want to do?
echo 1.Apply USB Write Protection
echo 2.Remove USB Write Protection
::param1
set "param1=%globalparam2%"
goto :param1Check
:param1Prompt
set /p "param1=Enter Choice: "
:param1Check
if "%param1%"=="" goto :param1Prompt

if %param1%==1 (
REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies\ /v WriteProtect /t REG_DWORD /d 00000001 
echo USB Write is Locked!
)
if %param1%==2 (
REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies\ /v WriteProtect /t REG_DWORD /d 00000000
echo USB Write is Unlocked! 
)
)
pause

Answer 1

之所以收到该错误，是因为在评估param1 if语句时，param始终为null，这是因为它们是范围内的变量而没有延迟扩展。

使用括号时，这些括号内的所有命令和变量都会被扩展。那时，param1没有值，因此if语句无效。使用延迟扩展时，仅在实际调用命令时才扩展变量。

另外，我建议使用if not defined命令来确定是否设置了变量。

@echo off
setlocal EnableExtensions EnableDelayedExpansion
cls
title ~USB Wizard~
echo What do you want to do?
echo 1.Enable/Disable USB Storage Devices.
echo 2.Enable/Disable Writing Data onto USB Storage.
echo 3.~Yet to come~.

set "a=%globalparam1%"
goto :aCheck
:aPrompt
set /p "a=Enter Choice: "
:aCheck
if not defined a goto :aPrompt
echo %a%

IF "%a%"=="2" (
    title USB WRITE LOCK
    echo What do you want to do?
    echo 1.Apply USB Write Protection
    echo 2.Remove USB Write Protection

    ::param1
    set "param1=%globalparam2%"
    goto :param1Check
    :param1Prompt
    set /p "param1=Enter Choice: "
    :param1Check
    if not defined param1 goto :param1Prompt
    echo !param1!

    if "!param1!"=="1" (
        REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies\ /v WriteProtect /t REG_DWORD /d 00000001 
        echo USB Write is Locked!
    )
    if "!param1!"=="2" (
        REG ADD HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies\ /v WriteProtect /t REG_DWORD /d 00000000
        echo USB Write is Unlocked! 
    )
)
pause
endlocal