- html - 出于某种原因,IE8 对我的 Sass 文件中继承的 html5 CSS 不友好?
- JMeter 在响应断言中使用 span 标签的问题
- html - 在 :hover and :active? 上具有不同效果的 CSS 动画
- html - 相对于居中的 html 内容固定的 CSS 重复背景?
试图将 Elasticsearch 设置为绑定(bind)到本地以外的另一个地址,我遇到了很多麻烦。
Elasticsearch-oss 7.7 Opendistro。
Elasticsearch .yml:
# ---------------------------------- Network -----------------------------------
#
# Set the bind address to a specific IP (IPv4 or IPv6):
#
#network.host: 192.168.0.1
#
# Set a custom port for HTTP:
#
#http.port: 9200
无法设置为任何语法...尝试了一个数组
network.host: [ "127.0.0.1", "100.0.0.1" ]
...并尝试了不同的变化,例如特殊值等。
network.host: 0.0.0.0
也不工作...
network:
host: _global_
也不工作...
network:
host: _local_
在职的
network:
host: _local_ , _interface-name_
...不工作。
network.host: localhost
http.host: 100.0.0.1
从同一台服务器:
curl -XGET https://localhost:9200 -u admin:admin --insecure
curl: (7) Failed to connect to localhost port 9200: Connection refused
来自客户:
curl -XGET https://100.0.0.1:9200 -u admin:admin --insecure
{
"name" : "somename",
"cluster_name" : "someclustername",
"cluster_uuid" : "someclusteruuid",
"version" : {
"number" : "7.7.0",
"build_flavor" : "oss",
"build_type" : "deb",
"build_hash" : "81a1e9eda8e6183f5237786246f6dced26a10eaf",
"build_date" : "2020-05-12T02:01:37.602180Z",
"build_snapshot" : false,
"lucene_version" : "8.5.1",
"minimum_wire_compatibility_version" : "6.8.0",
"minimum_index_compatibility_version" : "6.0.0-beta1"
},
"tagline" : "You Know, for Search"
}
等待你解决这个问题的方法..
at java.lang.Thread.run(Thread.java:832) [?:?]
Caused by: javax.net.ssl.SSLHandshakeException: Received fatal alert: bad_certificate
at sun.security.ssl.Alert.createSSLException(Alert.java:131) ~[?:?]
at sun.security.ssl.Alert.createSSLException(Alert.java:117) ~[?:?]
at sun.security.ssl.TransportContext.fatal(TransportContext.java:311) ~[?:?]
at sun.security.ssl.Alert$AlertConsumer.consume(Alert.java:291) ~[?:?]
at sun.security.ssl.TransportContext.dispatch(TransportContext.java:184) ~[?:?]
at sun.security.ssl.SSLTransport.decode(SSLTransport.java:167) ~[?:?]
at sun.security.ssl.SSLEngineImpl.decode(SSLEngineImpl.java:729) ~[?:?]
at sun.security.ssl.SSLEngineImpl.readRecord(SSLEngineImpl.java:684) ~[?:?]
at sun.security.ssl.SSLEngineImpl.unwrap(SSLEngineImpl.java:499) ~[?:?]
at sun.security.ssl.SSLEngineImpl.unwrap(SSLEngineImpl.java:475) ~[?:?]
at javax.net.ssl.SSLEngine.unwrap(SSLEngine.java:634) ~[?:?]
最佳答案
这里是完整的 elasticsearch.yml
安全证书选项是 Opendistro 的默认选项
# ======================== Elasticsearch Configuration =========================
#
# NOTE: Elasticsearch comes with reasonable defaults for most settings.
# Before you set out to tweak and tune the configuration, make sure you
# understand what are you trying to accomplish and the consequences.
#
# The primary way of configuring a node is via this file. This template lists
# the most important settings you may want to configure for a production cluster.
#
# Please consult the documentation for further information on configuration options:
# https://www.elastic.co/guide/en/elasticsearch/reference/index.html
#
# ---------------------------------- Cluster -----------------------------------
#
# Use a descriptive name for your cluster:
#
cluster.name: somename
#
# ------------------------------------ Node ------------------------------------
#
# Use a descriptive name for the node:
#
#node.name: node-1
#
# Add custom attributes to the node:
#
#node.attr.rack: r1
#
# ----------------------------------- Paths ------------------------------------
#
# Path to directory where to store the data (separate multiple locations by comma):
#
path.data: /var/lib/elasticsearch
#
# Path to log files:
#
path.logs: /var/log/elasticsearch
#
# ----------------------------------- Memory -----------------------------------
#
# Lock the memory on startup:
#
#bootstrap.memory_lock: true
#
# Make sure that the heap size is set to about half the memory available
# on the system and that the owner of the process is allowed to use this
# limit.
#
# Elasticsearch performs poorly when the system is swapping the memory.
#
# ---------------------------------- Network -----------------------------------
#
# Set the bind address to a specific IP (IPv4 or IPv6):
#
#network.host: 192.168.0.1
network.host: localhost
http.host: 100.0.0.1
#
# Set a custom port for HTTP:
#
#http.port: 9200
#
# For more information, consult the network module documentation.
#
# --------------------------------- Discovery ----------------------------------
#
# Pass an initial list of hosts to perform discovery when this node is started:
# The default list of hosts is ["127.0.0.1", "[::1]"]
#
#discovery.seed_hosts: ["host1", "host2"]
#
# Bootstrap the cluster using an initial set of master-eligible nodes:
#
#cluster.initial_master_nodes: ["node-1", "node-2"]
#
# For more information, consult the discovery and cluster formation module documentation.
#
# ---------------------------------- Gateway -----------------------------------
#
# Block initial recovery after a full cluster restart until N nodes are started:
#
#gateway.recover_after_nodes: 3
#
# For more information, consult the gateway module documentation.
#
# ---------------------------------- Various -----------------------------------
#
# Require explicit names when deleting indices:
#
#action.destructive_requires_name: true
######## Start OpenDistro for Elasticsearch Security Demo Configuration ########
# WARNING: revise all the lines below before you go into production
opendistro_security.ssl.transport.pemcert_filepath: esnode.pem
opendistro_security.ssl.transport.pemkey_filepath: esnode-key.pem
opendistro_security.ssl.transport.pemtrustedcas_filepath: root-ca.pem
opendistro_security.ssl.transport.enforce_hostname_verification: false
opendistro_security.ssl.http.enabled: true
opendistro_security.ssl.http.pemcert_filepath: esnode.pem
opendistro_security.ssl.http.pemkey_filepath: esnode-key.pem
opendistro_security.ssl.http.pemtrustedcas_filepath: root-ca.pem
opendistro_security.allow_unsafe_democertificates: true
opendistro_security.allow_default_init_securityindex: true
opendistro_security.authcz.admin_dn:
- CN=kirk,OU=client,O=client,L=test, C=de
opendistro_security.audit.type: internal_elasticsearch
opendistro_security.enable_snapshot_restore_privilege: true
opendistro_security.check_snapshot_restore_write_privileges: true
opendistro_security.restapi.roles_enabled: ["all_access", "security_rest_api_access"]
cluster.routing.allocation.disk.threshold_enabled: false
node.max_local_storage_nodes: 3
######## End OpenDistro for Elasticsearch Security Demo Configuration ########
What does "client" mean in this context?A client-node that is shipping logs to the server-node. In this case for testing purposses.
关于Elasticsearch-oss 不能同时绑定(bind)本地和外部地址,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/62706970/
如何指示 webpack 排除所有 d3 模块? // does not work externals: { "d3-*": "d3" } 所以如果应用导入了d3-submod
这个问题在这里已经有了答案: 9年前关闭。 Possible Duplicate: What does “outer =>” really mean? 我在哪里可以找到有关信息 trait After
这是一个简单的循环,我正在尝试对性能进行基准测试。 var extremeLoop=function(n){ var time=new Date() var t=0; for(
问题+概述 下面是两个片段,其中包含最初隐藏的 div,然后通过单击 button 和 jQuery 的 .show() 显示。两个 div 都具有由外部样式表应用的 display: grid; 样
我有一个 HTML 页面和一个单独的 .js 文件,该文件包含在带有 的页面中标签。 这是我的 .js 文件: element = document.getElementById("test");
我在 linux 静态库项目中有 3 个文件,我想在两个类方法实现文件中使用的静态字段存在链接问题。我有 class1.h、class1main.cpp 和 class1utils.cpp。 clas
我正在尝试将颜色背景更改为默认背景颜色,当我点击输入框外 我尝试使用“null”或“none”但没有用? window.addEventListener('click', outsideClick);
我正在编写一个应用程序,要求用户在手机上选择各种类型的文件。我使用此代码启动文件选择器 Intent : Intent intent = new Intent(Intent.ACTION_GET_C
在 android 中,不可移动(内部)的外部存储和内部存储有什么区别?我不确定在哪里保存我的数据。我只需要保存一个人可以随时提取的游戏统计数据 谢谢 最佳答案 在许多较新的设备中,将不再有物理区别,
在 C++ 中,假设我们有这个头文件: myglobals.h #ifndef my_globals_h #define my_globals_h int monthsInYear = 12; #en
我正在尝试使用 externs 在 C++ 中连接到 Ada。这两种实现有什么区别? 实现A namespace Ada { extern "C" { int getN
这个问题在这里已经有了答案: Get selected element's outer HTML (30 个答案) 关闭 2 年前。 想象一下我们有这样的东西: Hello World 如果我们这样
假设我在模块的顶部有这个: Public Declare Function getCustomerDetails Lib "CustomerFunctions" () As Long 如果我从 VB6
我目前正在使用这段代码: var wordRandomizer = { run: function (targetElem) { var markup = this.creat
我们正在使用 SVN 试水,并以 Beanstalk 作为主机。我们的设置如下所示: 存储库:模块 模块一 模块二 模块 3 存储库:网站1 自定义网站代码 svn:对模块 1 的外部引用 svn:对
有没有办法在负载均衡器中设置自动外部 IP 分配给像谷歌这样的服务? 我在裸机上运行 Kubernetes。 谢谢 最佳答案 使用 nodePort 类型的服务,它会将您的服务绑定(bind)到所有节
是否有可能在 Controller 之外使用 generateUrl() 方法? 我尝试在带有 $this->get('router') 的自定义存储库类中使用它,但它没有用。 更新 我在这里找到了一
我目前正在尝试通过 Webpack 外部对象外部化 Angular 依赖项来缩短构建时间。到目前为止,我已经为 React 和其他小库实现了这一目标。 如果我只是移动 '@angular/compil
我想创建一个自动应用其他插件的插件(外部插件)。这要求在我称为“应用插件”之前为插件设置构建脚本依赖项。但是似乎我无法在插件中添加buildscript依赖项,或者得到了: 您不能更改处于未解析状态的
我是R包的创建者EnvStats . 有一个我经常使用的函数,叫做 stripChart .我刚开始学习ggplot2 ,并在过去几天里仔细研究了 Hadley 的书、Winston 的书、Stack
我是一名优秀的程序员,十分优秀!