- html - 出于某种原因,IE8 对我的 Sass 文件中继承的 html5 CSS 不友好?
- JMeter 在响应断言中使用 span 标签的问题
- html - 在 :hover and :active? 上具有不同效果的 CSS 动画
- html - 相对于居中的 html 内容固定的 CSS 重复背景?
我有一个如下表格
AGREEMENTID FeedbackDate DispositionCode CollectorId
0003SBML00151 2017-08-22 08:00:00.000 PTP 1
0004SBHL00705 2017-08-22 08:20:00.000 BPTP 1
0007SBML01987 2017-08-22 09:10:00.000 SET 1
0026MSS00108 2017-08-22 07:50:00.000 PTP 2
0026MSS00108 2017-08-22 10:30:00.000 NC 2
0026MSS00108 2017-08-22 10:30:10.000 DL 2
0026MSS00108 2017-08-22 15:47:00.000 CB 2
0026MSS00108 2017-08-22 19:52:00.000 BPTP 2
最终输出为
收集者 1 在 8.00 和 8.20 进行了两次处置。因此,在 8 小时专栏中,他的处置代码可用。他还在 9.10 做出了一项处置,在 9 小时栏,他的处置代码可用。对于 Collector 2 也是如此。
到目前为止我已经尝试过
Declare @T table
(AGREEMENTID varchar(50),
FeedbackDate varchar(50),
DispositionCode varchar(10),
[CollectorId] varchar(100)
)
Insert into @T
SELECT '0003SBML00151','2017-08-22 08:00:00.000','PTP','1' union all
SELECT '0004SBHL00705','2017-08-22 08:20:00.000','BPTP','1' union all
SELECT '0007SBML01987','2017-08-22 09:10:00.000','BPTP','1' union all
SELECT '0026MSS00108','2017-08-21 07:50:00.000','PTP','2' union all
SELECT '0026MSS00108','2017-08-21 10:30:00.000','NC','2' union all
SELECT '0026MSS00108','2017-08-21 10:30:10.000','DL' ,'2' union all
SELECT '0026MSS00108','2017-08-21 15:47:00.000','CB' ,'2' union all
SELECT '0026MSS00108','2017-08-21 19:52:00.000','BPTP','2'
;with HoursCte as
(
select 7 as Hrs
union all
select Hrs + 1
from HoursCte
where Hrs < 22
),
cte1 as(
SELECT
CollectorId
,AGREEMENTID
,FeedbackDate
,FeedbackTime = CONVERT(nvarchar,CAST(FeedbackDate as time),108)
,DispositionCode
FROM @T t1),
cte2 as(
Select *, FeedbackHrs = case when FeedbackTime between cast('07:00:00' as time) and cast('07:59:59' as time) then '7Hrs'
when FeedbackTime between cast('08:00:00' as time) and cast('08:59:59' as time) then '8Hrs'
when FeedbackTime between cast('09:00:00' as time) and cast('09:59:59' as time) then '9Hrs'
when FeedbackTime between cast('10:00:00' as time) and cast('10:59:59' as time) then '10Hrs'
when FeedbackTime between cast('11:00:00' as time) and cast('11:59:59' as time) then '11Hrs'
when FeedbackTime between cast('12:00:00' as time) and cast('12:59:59' as time) then '12Hrs'
when FeedbackTime between cast('13:00:00' as time) and cast('13:59:59' as time) then '13Hrs'
when FeedbackTime between cast('14:00:00' as time) and cast('14:59:59' as time) then '14Hrs'
when FeedbackTime between cast('15:00:00' as time) and cast('15:59:59' as time) then '15Hrs'
when FeedbackTime between cast('16:00:00' as time) and cast('16:59:59' as time) then '16Hrs'
when FeedbackTime between cast('17:00:00' as time) and cast('17:59:59' as time) then '17Hrs'
when FeedbackTime between cast('18:00:00' as time) and cast('18:59:59' as time) then '18Hrs'
when FeedbackTime between cast('19:00:00' as time) and cast('19:59:59' as time) then '19Hrs'
when FeedbackTime between cast('20:00:00' as time) and cast('20:59:59' as time) then '20Hrs'
when FeedbackTime between cast('21:00:00' as time) and cast('21:59:59' as time) then '21Hrs'
when FeedbackTime between cast('22:00:00' as time) and cast('22:59:59' as time) then '22Hrs'
end
From cte1)
Select
CollectorId
,Hrs = CAST(Hrs as Varchar(4)) + 'Hrs'
,FeedbackHrs
,DispositionCode
From HoursCte h
Left join cte2 c2 on CAST(h.Hrs as Varchar(4)) + 'Hrs' = c2.FeedbackHrs
在那之后我迷失了。
最佳答案
相同的方法,稍作修改:
Declare @T table
(AGREEMENTID varchar(50),
FeedbackDate varchar(50),
DispositionCode varchar(10),
[CollectorId] varchar(100)
)
Insert into @T
SELECT '0003SBML00151','2017-08-22 08:00:00.000','PTP','1' union all
SELECT '0004SBHL00705','2017-08-22 08:20:00.000','BPTP','1' union all
SELECT '0007SBML01987','2017-08-22 09:10:00.000','BPTP','1' union all
SELECT '0026MSS00108','2017-08-21 07:50:00.000','PTP','2' union all
SELECT '0026MSS00108','2017-08-21 10:30:00.000','NC','2' union all
SELECT '0026MSS00108','2017-08-21 10:30:10.000','DL' ,'2' union all
SELECT '0026MSS00108','2017-08-21 15:47:00.000','CB' ,'2' union all
SELECT '0026MSS00108','2017-08-21 19:52:00.000','BPTP','2'
;with cte1 as(
SELECT
CollectorId
,AGREEMENTID
,FeedbackDate
,FeedbackTime = CONVERT(nvarchar,CAST(FeedbackDate as time),108)
,DispositionCode
FROM @T t1)
Select *, case when FeedbackTime between cast('07:00:00' as time) and cast('07:59:59' as time) then '7Hrs'
when FeedbackTime between cast('08:00:00' as time) and cast('08:59:59' as time) then '8Hrs'
when FeedbackTime between cast('09:00:00' as time) and cast('09:59:59' as time) then '9Hrs'
when FeedbackTime between cast('10:00:00' as time) and cast('10:59:59' as time) then '10Hrs'
when FeedbackTime between cast('11:00:00' as time) and cast('11:59:59' as time) then '11Hrs'
when FeedbackTime between cast('12:00:00' as time) and cast('12:59:59' as time) then '12Hrs'
when FeedbackTime between cast('13:00:00' as time) and cast('13:59:59' as time) then '13Hrs'
when FeedbackTime between cast('14:00:00' as time) and cast('14:59:59' as time) then '14Hrs'
when FeedbackTime between cast('15:00:00' as time) and cast('15:59:59' as time) then '15Hrs'
when FeedbackTime between cast('16:00:00' as time) and cast('16:59:59' as time) then '16Hrs'
when FeedbackTime between cast('17:00:00' as time) and cast('17:59:59' as time) then '17Hrs'
when FeedbackTime between cast('18:00:00' as time) and cast('18:59:59' as time) then '18Hrs'
when FeedbackTime between cast('19:00:00' as time) and cast('19:59:59' as time) then '19Hrs'
when FeedbackTime between cast('20:00:00' as time) and cast('20:59:59' as time) then '20Hrs'
when FeedbackTime between cast('21:00:00' as time) and cast('21:59:59' as time) then '21Hrs'
when FeedbackTime between cast('22:00:00' as time) and cast('22:59:59' as time) then '22Hrs'
end collectedhours into #test
From cte1
select * from #test
select CollectorId, isnull([7Hrs], '')as[7Hrs],
isnull([8Hrs], '')as[8Hrs],
isnull([9Hrs], '')as[9Hrs],
isnull([10Hrs],'')as[10Hrs],
isnull([11Hrs],'')as[11Hrs],
isnull([12Hrs],'')as[12Hrs],
isnull([13Hrs],'')as[13Hrs],
isnull([14Hrs],'')as[14Hrs],
isnull([15Hrs],'')as[15Hrs],
isnull([16Hrs],'')as[16Hrs],
isnull([17Hrs],'')as[17Hrs],
isnull([18Hrs],'')as[18Hrs],
isnull([19Hrs],'')as[19Hrs],
isnull([20Hrs],'')as[20Hrs],
isnull([21Hrs],'')as[21Hrs],
isnull([22Hrs] ,'')as[22Hrs]
from (
select distinct CollectorId,collectedhours,stuff((select ','+DispositionCode from #test a where a.CollectorId=b.CollectorId
and a.collectedhours=b.collectedhours
group by CollectorId,DispositionCode for xml path('')), 1,1,'')DispositionCode
from #test b)z
pivot
(max(DispositionCode) for collectedhours in([7Hrs], [8Hrs], [9Hrs], [10Hrs], [11Hrs], [12Hrs], [13Hrs], [14Hrs], [15Hrs], [16Hrs], [17Hrs],
[18Hrs], [19Hrs], [20Hrs], [21Hrs], [22Hrs]))as pvt
关于sql - 如何设置不同时间间隔的值?,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/45809223/
您好,我是使用 xampp 的 PHPmyadmin 新手,没有 MYSQL 背景。当我喜欢研究它是如何工作的时,我的脑海中浮现出一个想法,它让我一周都无法休眠,因为我似乎无法弄清楚如何使用 MIN(
Go docs say (强调): Programs using times should typically store and pass them as values, not pointers.
我有一组用户在 8 月 1 日有一个条目。我想找到在 8 月 1 日有条目但在 8 月 2 日没有做任何事情的用户。 现在是 10 月,所以事件已经过去很久了。 我有限的知识说: SELECT * F
我有以下代码,主要编码和取消编码时间结构。这是代码 package main import ( "fmt" "time" "encoding/json" ) type chec
您能详细解释一下“用户 CPU 时间”和“系统 CPU 时间”吗?我读了很多,但我不太理解。 最佳答案 区别在于时间花在用户空间还是内核空间。用户 CPU 时间是处理器运行程序代码(或库中的代码)所花
应用程序不计算东西,但做输入/输出、读取文件、使用网络。我希望探查器显示它。 我希望像 callgrind 中的东西一样,在每个问题中调用 clock_gettime。 或者像 oprofile 那样
目前我的 web 应用程序接收 websocket 数据来触发操作。 这会在页面重新加载时中断,因此我需要一个能够触发特定事件的客户端解决方案。 这个想法可行吗? 假设你有 TimeX = curre
很难说出这里问的是什么。这个问题是含糊的、模糊的、不完整的、过于宽泛的或修辞性的,无法以目前的形式得到合理的回答。如需帮助澄清此问题以便重新打开它,visit the help center 。 已关
我有一个 Instant (org.joda.time.Instant) 的实例,我在一些 api 响应中得到它。我有另一个来自 (java.time.Instant) 的实例,这是我从其他调用中获得
如何集成功能 f(y) w.r.t 时间;即 'y'是一个包含 3000 个值和值 time(t) 的数组从 1 到 3000 不等。所以,在整合 f(y) 后我需要 3000 个值. 积分将是不确定
可以通过 CLI 创建命名空间,但是如何使用 Java SDK 来创建命名空间? 最佳答案 它以编程方式通过 gRPC API 完成由服务公开。 在 Java 中,生成的 gRPC 客户端可以通过 W
我有一个函数,它接受 2 组日期(开始日期和结束日期),这些日期将用于我的匹配引擎 我必须知道start_date1和end_date1是否在start_date2和end_date2内 快进:当我在
我想从 Python 脚本运行“time”unix 命令,以计算非 Python 应用程序的执行时间。我会使用 os.system 方法。有什么方法可以在Python中保存这个输出吗?我的目标是多次运
我正在寻找一种“漂亮的数字”算法来确定日期/时间值轴上的标签。我熟悉 Paul Heckbert's Nice Numbers algorithm . 我有一个在 X 轴上显示时间/日期的图,用户可以
在 PowerShell 中,您可以格式化日期以返回当前小时,如下所示: Get-Date -UFormat %H 您可以像这样在 UTC 中获取日期字符串: $dateNow = Get-Date
我正在尝试使用 Javascript 向父子窗口添加一些页面加载检查功能。 我的目标是“从父窗口”检测,每次子窗口完全加载然后执行一些代码。 我在父窗口中使用以下代码示例: childPage=wi
我正在尝试设置此 FFmpeg 命令的 drawtext 何时开始,我尝试使用 start_number 但看起来它不会成功。 ffmpeg -i 1.mp4 -acodec aac -keyint_
我收到了一个 Excel (2010) 电子表格,它基本上是一个文本转储。 单元格 - J8 具有以下信息 2014 年 2 月 4 日星期二 00:08:06 EST 单元格 - L8 具有以下信息
我收到的原始数据包含一列具有以下日期和时间戳格式的数据: 2014 年 3 月 31 日凌晨 3:38 单元格的格式并不一致,因为有些单元格有单个空格,而另一些单元格中有两个或三个字符之间的空格。所以
我想知道是否有办法在我的 Grails 应用程序顶部显示版本和构建日期。 编辑:我应该说我正在寻找构建应用程序的日期/时间。 最佳答案 在您的主模板中,或任何地方。 Server version:
我是一名优秀的程序员,十分优秀!