gpt4 book ai didi

asterisk - 如何使用负载平衡和 Asterisk 配置kamailio服务器?

转载 作者:行者123 更新时间:2023-12-02 21:46:48 27 4
gpt4 key购买 nike

我想配置Kamailio服务器,以便流量将平均转发到其他四个 Asterisk 服务器。它在单个 Asterisk 盒中工作正常,但我无法将调用转发到另一个 Asterisk 盒。

这是我正在使用的 kamailio.cfg。

#!KAMAILIO

#!define WITH_MYSQL
#!define WITH_AUTH
#!define WITH_USRLOCDB
#!define WITH_NAT
#!define WITH_ASTERISK


# *** Value defines - IDs used later in config
#!ifdef WITH_MYSQL
# - database URL - used to connect to database server by modules such
# as: auth_db, acc, usrloc, a.s.o.
#!define DBURL "mysql://root:PASS@127.0.0.1/openser"
#!ifdef WITH_ASTERISK
#!define DBASTURL "mysql://root:PASS@127.0.0.1/db_portal_mahtab"
#!endif
#!endif
#!ifdef WITH_MULTIDOMAIN
# - the value for 'use_domain' parameters
#!define MULTIDOMAIN 1
#!else
#!define MULTIDOMAIN 0
#!endif

# - flags
# FLT_ - per transaction (message) flags
# FLB_ - per branch flags
#!define FLT_ACC 1
#!define FLT_ACCMISSED 2
#!define FLT_ACCFAILED 3
#!define FLT_NATS 5

#!define FLB_NATB 6
#!define FLB_NATSIPPING 7

####### Global Parameters #########

#!ifdef WITH_DEBUG
debug=4
log_stderror=yes
#!else
debug=4
log_stderror=no
#!endif

log_name="kamailio"

memdbg=5
memlog=5
log_facility=LOG_LOCAL0
fork=yes
children=4

#disable_tcp=yes
local aliases
based on reverse DNS on IPs (default on) */
#auto_aliases=no
#alias="localhost"
listen=udp:IPADDRESS:5060

;port=5060

#!ifdef WITH_TLS
enable_tls=yes
#!endif

tcp_connection_lifetime=3605

#!ifdef WITH_VOICEMAIL
# VoiceMail Routing on offline, busy or no answer
#
# - by default Voicemail server IP is empty to avoid misrouting
voicemail.srv_ip = "" desc "VoiceMail IP Address"
voicemail.srv_port = "5060" desc "VoiceMail Port"
#!endif

#!ifdef WITH_ASTERISK
asterisk.bindip = "IPADDRESSA" desc "Asterisk IP Address"
asterisk.bindport = "5080" desc "Asterisk Port"
kamailio.bindip = "IPADDRESSB" desc "Kamailio IP Address"
kamailio.bindport = "5060" desc "Kamailio Port"
#!endif

####### Modules Section ########

# set paths to location of modules (to sources or installation folders)
#!ifdef WITH_SRCPATH
mpath="modules_k:modules"
#!else
mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib/kamailio/modules/:/usr/local/lib/kamailio/modules_s/"
#!endif

#!ifdef WITH_MYSQL
loadmodule "db_mysql.so"
#!endif
loadmodule "mi_datagram.so"
loadmodule "dispatcher.so"
loadmodule "mi_fifo.so"
loadmodule "kex.so"
loadmodule "tm.so"
loadmodule "tmx.so"
loadmodule "sl.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "ctl.so"
loadmodule "cfg_rpc.so"
loadmodule "mi_rpc.so"
loadmodule "acc.so"
loadmodule "rtimer.so"
loadmodule "sqlops.so"
loadmodule "htable.so"
loadmodule "ipops.so"

route[CDRS] {
sql_query("ca","call kamailio_cdrs()","rb");
sql_query("ca","call kamailio_rating('default')","rb");

}


modparam("rtimer", "timer", "name=tst;interval=300;mode=1;")
modparam("rtimer", "exec", "timer=tst;route=STATS")
modparam("rtimer", "timer", "name=cdr;interval=300;mode=1;")
modparam("rtimer", "exec", "timer=cdr;route=CDRS")

modparam("sqlops","sqlcon","ca=>mysql://root:PASS@127.0.0.1/openser")


modparam("htable", "htable", "stats=>size=6;")
route[STATS] {

# clean very old records
$var(tmc) = $var(tmc) + 1;
$var(x) = $var(tmc) mod 144;
if($var(x) == 0)
sql_query("ca",
"delete from statistics where time_stamp<$Ts - 864000",
"ra");

# insert values for Kamailio internal statistics
sql_query("ca",
"insert into statistics (time_stamp,shm_used_size,"
"shm_real_used_size,shm_max_used_size,shm_free_used_size,"
"ul_users,ul_contacts) values ($Ts,$stat(used_size),"
"$stat(real_used_size),$stat(max_used_size),$stat(free_size),"
"$stat(location-users),$stat(location-contacts))",
"ra");

# init the values for first execution, compute the diff for the rest
if($var(tmc)==1)
{
$var(rcv_req_diff) = $stat(rcv_requests);
$var(fwd_req_diff) = $stat(fwd_requests);
$var(2xx_trans_diff) = $stat(2xx_transactions);
} else {
$var(rcv_req_diff) = $stat(rcv_requests) - $sht(stats=>last_rcv_req);
$var(fwd_req_diff) = $stat(fwd_requests) - $sht(stats=>last_fwd_req);
$var(2xx_trans_diff) = $stat(2xx_transactions)
- $sht(stats=>last_2xx_trans);
}
# update the values for stats stored in cache (htable)
$sht(stats=>last_rcv_req) = $stat(rcv_requests);
$sht(stats=>last_fwd_req) = $stat(fwd_requests);
$sht(stats=>last_2xx_trans) = $stat(2xx_transactions);

# insert values for stats computed in config
sql_query("ca",
"update statistics set tm_active=$stat(inuse_transactions),"
"rcv_req_diff=$var(rcv_req_diff),fwd_req_diff=$var(fwd_req_diff),"
"2xx_trans_diff=$var(2xx_trans_diff) where time_stamp=$Ts",
"ra");
}

#!ifdef WITH_AUTH
loadmodule "auth.so"
loadmodule "auth_db.so"
#!ifdef WITH_IPAUTH
loadmodule "permissions.so"
#!endif
#!endif

#!ifdef WITH_ALIASDB
loadmodule "alias_db.so"
#!endif

#!ifdef WITH_SPEEDDIAL
loadmodule "speeddial.so"
#!endif

#!ifdef WITH_MULTIDOMAIN
loadmodule "domain.so"
#!endif

#!ifdef WITH_PRESENCE
loadmodule "presence.so"
loadmodule "presence_xml.so"
#!endif

#!ifdef WITH_NAT
loadmodule "nathelper.so"
loadmodule "rtpproxy.so"
#!endif

#!ifdef WITH_TLS
loadmodule "tls.so"
#!endif

#!ifdef WITH_ANTIFLOOD
loadmodule "htable.so"
loadmodule "pike.so"
#!endif

#!ifdef WITH_XMLRPC
loadmodule "xmlrpc.so"
#!endif

#!ifdef WITH_DEBUG
loadmodule "debugger.so"
#!endif

#!ifdef WITH_ASTERISK
loadmodule "uac.so"
#!endif




# ----------------- setting module-specific parameters ---------------


# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo")


# ----- tm params -----
# auto-discard branches from previous serial forking leg
modparam("tm", "failure_reply_mode", 3)
# default retransmission timeout: 30sec
modparam("tm", "fr_timer", 30000)
# default invite retransmission timeout after 1xx: 120sec
modparam("tm", "fr_inv_timer", 120000)

modparam("dispatcher", "db_url","mysql://root:PASS@127.0.0.1/openser")
modparam("dispatcher", "table_name", "dispatcher")
#modparam("dispatcher", "ds_ping_interval", 3)
modparam("dispatcher", "ds_ping_from", "sip:dispatcher@localhost")
modparam("dispatcher", "force_dst", 1)
modparam("dispatcher", "ds_ping_method", "INFO")
modparam("dispatcher", "ds_ping_reply_codes", "class=2;code=403;code=404;code=484;code=488;code=481;class=3;class=408 ")
# do failover
modparam("dispatcher", "flags", 2)
modparam("dispatcher", "dst_avp", "$avp(AVP_DST)")
modparam("dispatcher", "grp_avp", "$avp(AVP_GRP)")
modparam("dispatcher", "cnt_avp", "$avp(AVP_CNT)")
# -----cmd
modparam("mi_datagram", "socket_name", "udp:IPADDRESS:8033")
# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
#!ifdef WITH_ASTERISK
modparam("rr", "append_fromtag", 1)
#!else
modparam("rr", "append_fromtag", 0)
#!endif

# ----- registrar params -----
modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via location */
# modparam("registrar", "append_branches", 0)
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)
# max value for expires of registrations
modparam("registrar", "max_expires", 3600)
# set it to 1 to enable GRUU
modparam("registrar", "gruu_enabled", 0)


# ----- acc params -----
/* what special events should be accounted ? */
modparam("acc", "early_media", 1)
modparam("acc", "report_ack", 1)
modparam("acc", "report_cancels", 0)
/* by default ww do not adjust the direct of the sequential requests.
if you enable this parameter, be sure the enable "append_fromtag"
in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "log_flag", FLT_ACC)
modparam("acc", "log_missed_flag", FLT_ACCMISSED)
modparam("acc", "log_extra",
"src_user=$fU;src_domain=$fd;src_ip=$si;"
"dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
modparam("acc", "failed_transaction_flag", FLT_ACCFAILED)
/* enhanced DB accounting */
#!ifdef WITH_ACCDB
modparam("acc", "db_flag", FLT_ACC)
modparam("acc", "db_missed_flag", FLT_ACCMISSED)
modparam("acc", "db_url", DBURL)
modparam("acc", "db_extra",
"src_user=$fU;src_domain=$fd;src_ip=$si;"
"dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")

#modparam("acc", "cdr_enable", 1)
#modparam("acc", "cdr_start_on_confirmed", 1)
#modparam("acc", "cdr_start_id", "start")
#modparam("acc", "cdr_end_id", "end")
#modparam("acc", "cdr_duration_id", "d")
#modparam("acc", "cdr_log_enable", 1)
modparam("acc", "cdrs_table", "cdrs")
#!endif



# ----- usrloc params -----
/* enable DB persistency for location entries */
#!ifdef WITH_USRLOCDB
modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "use_domain", MULTIDOMAIN)
#!endif


# ----- auth_db params -----
#!ifdef WITH_AUTH
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "load_credentials", "")

#!ifdef WITH_ASTERISK
modparam("auth_db", "user_column", "username")
modparam("auth_db", "password_column", "sippasswd")
modparam("auth_db", "db_url", DBASTURL)
modparam("auth_db", "version_table", 0)
#!else
modparam("auth_db", "db_url", DBURL)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "use_domain", MULTIDOMAIN)
#!endif

# ----- permissions params -----
#!ifdef WITH_IPAUTH
modparam("permissions", "db_url", DBURL)
modparam("permissions", "db_mode", 1)
#!endif

#!endif


# ----- alias_db params -----
#!ifdef WITH_ALIASDB
modparam("alias_db", "db_url", DBURL)
modparam("alias_db", "use_domain", MULTIDOMAIN)
#!endif


# ----- speedial params -----
#!ifdef WITH_SPEEDDIAL
modparam("speeddial", "db_url", DBURL)
modparam("speeddial", "use_domain", MULTIDOMAIN)
#!endif


# ----- domain params -----
#!ifdef WITH_MULTIDOMAIN
modparam("domain", "db_url", DBURL)
# register callback to match myself condition with domains list
modparam("domain", "register_myself", 1)
#!endif


#!ifdef WITH_PRESENCE
# ----- presence params -----
modparam("presence", "db_url", DBURL)

# ----- presence_xml params -----
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1)
#!endif


#!ifdef WITH_NAT
# ----- rtpproxy params -----
modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722")
modparam("rtpproxy", "rtpproxy_disable_tout", 8)
modparam("rtpproxy", "rtpproxy_tout", 2)

# ----- nathelper params -----
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
modparam("nathelper", "sipping_from", "sip:pinger@kamailio.org")

# params needed for NAT traversal in other modules
modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)")
modparam("usrloc", "nat_bflag", FLB_NATB)
#!endif


#!ifdef WITH_TLS
# ----- tls params -----
modparam("tls", "config", "/usr/local/etc/kamailio/tls.cfg")
#!endif

#!ifdef WITH_ANTIFLOOD
# ----- pike params -----
modparam("pike", "sampling_time_unit", 2)
modparam("pike", "reqs_density_per_unit", 16)
modparam("pike", "remove_latency", 4)

# ----- htable params -----
# ip ban htable with autoexpire after 5 minutes
modparam("htable", "htable", "ipban=>size=8;autoexpire=300;")
#!endif

#!ifdef WITH_XMLRPC
# ----- xmlrpc params -----
modparam("xmlrpc", "route", "XMLRPC");
modparam("xmlrpc", "url_match", "^/RPC")
#!endif

#!ifdef WITH_DEBUG
# ----- debugger params -----
modparam("debugger", "cfgtrace", 1)
#!endif

####### Routing Logic ########


# Main SIP request routing logic
# - processing of any incoming SIP request starts with this route
# - note: this is the same as route { ... }
request_route {

# per request initial checks
route(REQINIT);

# NAT detection
route(NATDETECT);

# handle requests within SIP dialogs
route(WITHINDLG);

### only initial requests (no To tag)

# CANCEL processing
if (is_method("CANCEL"))
{
if (t_check_trans())
t_relay();
exit;
}

t_check_trans();

# authentication
route(AUTH);

# record routing for dialog forming requests (in case they are routed)
# - remove preloaded route headers
remove_hf("Route");
if (is_method("INVITE|SUBSCRIBE"))
record_route();

# account only INVITEs
if (is_method("INVITE"))
{
setflag(FLT_ACC); # do accounting
}

# dispatch requests to foreign domains
route(SIPOUT);

### requests for my local domains

# handle presence related requests
route(PRESENCE);

# handle registrations
route(REGISTRAR);

if ($rU==$null)
{
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}

# dispatch destinations to PSTN
route(PSTN);

# user location service
route(LOCATION);

route(RELAY);
}

route[DISPATCH] {
# round robin dispatching on gateways group '1'
xlog("trying for dispatch");
if (!ds_select_domain("1", "4")) {
send_reply("404", "No destination");
exit;
}
t_on_failure("RTF_DISPATCH");
route(RELAY);
exit;
}
# Sample failure route
failure_route[RTF_DISPATCH] {
if (t_is_canceled()) {
exit;
}
# next DST - only for 500 or local timeout
if (t_check_status("500")
or (t_branch_timeout() and !t_branch_replied()))
{
if(ds_next_dst())
{
t_on_failure("RTF_DISPATCH");
route(RELAY);
exit;
}
}
}


route[RELAY] {

# enable additional event routes for forwarded requests
# - serial forking, RTP relaying handling, a.s.o.
if (is_method("INVITE|SUBSCRIBE")) {
t_on_branch("MANAGE_BRANCH");
t_on_reply("MANAGE_REPLY");
}
if (is_method("INVITE")) {
t_on_failure("MANAGE_FAILURE");
}

if (!t_relay()) {
sl_reply_error();
}
exit;
}

# Per SIP request initial checks
route[REQINIT] {
#!ifdef WITH_ANTIFLOOD
# flood dection from same IP and traffic ban for a while
# be sure you exclude checking trusted peers, such as pstn gateways
# - local host excluded (e.g., loop to self)
if(src_ip!=myself)
{
if($sht(ipban=>$si)!=$null)
{
# ip is already blocked
xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n");
exit;
}
if (!pike_check_req())
{
xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n");
$sht(ipban=>$si) = 1;
exit;
}
}
#!endif

if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}

if(!sanity_check("1511", "7"))
{
xlog("Malformed SIP message from $si:$sp\n");
exit;
}
}

# Handle requests within SIP dialogs
route[WITHINDLG] {
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
if (is_method("BYE")) {
setflag(FLT_ACC); # do accounting ...
setflag(FLT_ACCFAILED); # ... even if the transaction fails
}
if ( is_method("ACK") ) {
# ACK is forwarded statelessy
route(NATMANAGE);
}
route(RELAY);
} else {
if (is_method("SUBSCRIBE") && uri == myself) {
# in-dialog subscribe requests
route(PRESENCE);
exit;
}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# no loose-route, but stateful ACK;
# must be an ACK after a 487
# or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ... ignore and discard
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
}

# Handle SIP registrations
route[REGISTRAR] {
if (is_method("REGISTER"))
{
if(isflagset(FLT_NATS))
{
setbflag(FLB_NATB);
# uncomment next line to do SIP NAT pinging
## setbflag(FLB_NATSIPPING);
}
if (!save("location"))
sl_reply_error();

#!ifdef WITH_ASTERISK
route(REGFWD);
#!endif

exit;
}
}

# USER location service
route[LOCATION] {

#!ifdef WITH_SPEEDIAL
# search for short dialing - 2-digit extension
if($rU=~"^[0-9][0-9]$")
if(sd_lookup("speed_dial"))
route(SIPOUT);
#!endif

#!ifdef WITH_ALIASDB
# search in DB-based aliases
if(alias_db_lookup("dbaliases"))
route(SIPOUT);
#!endif

#!ifdef WITH_ASTERISK
if(is_method("INVITE") && (!route(FROMASTERISK))) {
# if new call from out there - send to Asterisk
# - non-INVITE request are routed directly by Kamailio
# - traffic from Asterisk is routed also directy by Kamailio
route(TOASTERISK);
exit;
}
#!endif

$avp(oexten) = $rU;
if (!lookup("location")) {
$var(rc) = $rc;
route(TOVOICEMAIL);
t_newtran();
switch ($var(rc)) {
case -1:
case -3:
send_reply("404", "Not Found");
exit;
case -2:
send_reply("405", "Method Not Allowed");
exit;
}
}

# when routing via usrloc, log the missed calls also
if (is_method("INVITE"))
{
setflag(FLT_ACCMISSED);
}
}

# Presence server route
route[PRESENCE] {
if(!is_method("PUBLISH|SUBSCRIBE"))
return;

#!ifdef WITH_PRESENCE
if (!t_newtran())
{
sl_reply_error();
exit;
};

if(is_method("PUBLISH"))
{
handle_publish();
t_release();
}
else
if( is_method("SUBSCRIBE"))
{
handle_subscribe();
t_release();
}
exit;
#!endif

# if presence enabled, this part will not be executed
if (is_method("PUBLISH") || $rU==$null)
{
sl_send_reply("404", "Not here");
exit;
}
return;
}

# Authentication route
route[AUTH] {
#!ifdef WITH_AUTH

#!ifdef WITH_ASTERISK
# do not auth traffic from Asterisk - trusted!
if(route(FROMASTERISK))
return;
#!endif

#!ifdef WITH_IPAUTH
if((!is_method("REGISTER")) && allow_source_address())
{
# source IP allowed
return;
}
#!endif

if (is_method("REGISTER") || from_uri==myself)
{
# authenticate requests
#!ifdef WITH_ASTERISK
if (!auth_check("$fd", "sipusers", "1")) {
#!else
if (!auth_check("$fd", "subscriber", "1")) {
#!endif
auth_challenge("$fd", "0");
exit;
}
# user authenticated - remove auth header
if(!is_method("REGISTER|PUBLISH"))
consume_credentials();
}
# if caller is not local subscriber, then check if it calls
# a local destination, otherwise deny, not an open relay here
if (from_uri!=myself && uri!=myself)
{
sl_send_reply("403","Not relaying");
exit;
}

#!endif
return;
}

# Caller NAT detection route
route[NATDETECT] {
#!ifdef WITH_NAT
force_rport();
if (nat_uac_test("19")) {
if (is_method("REGISTER")) {
fix_nated_register();
} else {
fix_nated_contact();
}
setflag(FLT_NATS);
}
#!endif
return;
}


route[RTPPROXY] {
if (is_method("INVITE")){
sql_query("ca", "select destination from dispatcher where destination like '%$dd%'","ra");
if($dbr(ra=>rows)>0){
$avp(duip)=$(du{s.select,-2,:});
if (is_ip_rfc1918("$avp(duip)")) {
xlog("L_INFO", "Call is going to private IPv4 Media Server Engage RTPProxy Now\n");

rtpproxy_manage("rwie");
}

}
else if(ds_is_from_list()){
if (is_ip_rfc1918("$si")) {
xlog("L_INFO", " Call is coming from a private IPv4 Media Server Engage RTPProxy Now\n");

rtpproxy_manage("rwei");

}
}else if(!ds_is_from_list()){
rtpproxy_manage("rwie");

}
}

}


# RTPProxy control
route[NATMANAGE] {
#!ifdef WITH_NAT
if (is_request()) {
if(has_totag()) {
if(check_route_param("nat=yes")) {
setbflag(FLB_NATB);
}
}
}
if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB))){
return;
}



rtpproxy_manage();

if (is_request()) {
if (!has_totag()) {
add_rr_param(";nat=yes");
}
}
if (is_reply()) {
if(isbflagset(FLB_NATB)) {
fix_nated_contact();
}
}
#!endif
return;
}

# Routing to foreign domains
route[SIPOUT] {
if (!uri==myself)
{
append_hf("P-hint: outbound\r\n");
route(RELAY);
}
}

# PSTN GW routing
route[PSTN] {
#!ifdef WITH_PSTN
# check if PSTN GW IP is defined
if (strempty($sel(cfg_get.pstn.gw_ip))) {
xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n");
return;
}

# route to PSTN dialed numbers starting with '+' or '00'
# (international format)
# - update the condition to match your dialing rules for PSTN routing
if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$"))
return;

# only local users allowed to call
if(from_uri!=myself) {
sl_send_reply("403", "Not Allowed");
exit;
}

$ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip);

route(RELAY);
exit;
#!endif

return;
}

# XMLRPC routing
#!ifdef WITH_XMLRPC
route[XMLRPC] {
# allow XMLRPC from localhost
if ((method=="POST" || method=="GET")
&& (src_ip==127.0.0.1)) {
# close connection only for xmlrpclib user agents (there is a bug in
# xmlrpclib: it waits for EOF before interpreting the response).
if ($hdr(User-Agent) =~ "xmlrpclib")
set_reply_close();
set_reply_no_connect();
dispatch_rpc();
exit;
}
send_reply("403", "Forbidden");
exit;
}
#!endif

# route to voicemail server
route[TOVOICEMAIL] {
#!ifdef WITH_VOICEMAIL
if(!is_method("INVITE"))
return;

# check if VoiceMail server IP is defined
if (strempty($sel(cfg_get.voicemail.srv_ip))) {
xlog("SCRIPT: VoiceMail rotuing enabled but IP not defined\n");
return;
}
if($avp(oexten)==$null)
return;

$ru = "sip:" + $avp(oexten) + "@" + $sel(cfg_get.voicemail.srv_ip)
+ ":" + $sel(cfg_get.voicemail.srv_port);
route(RELAY);
exit;
#!endif

return;
}

# manage outgoing branches
branch_route[MANAGE_BRANCH] {
xdbg("new branch [$T_branch_idx] to $ru\n");
route(NATMANAGE);
}

# manage incoming replies
onreply_route[MANAGE_REPLY] {
xdbg("incoming reply\n");
if(status=~"[12][0-9][0-9]")
route(NATMANAGE);
}

# manage failure routing cases
failure_route[MANAGE_FAILURE] {
route(NATMANAGE);

if (t_is_canceled()) {
exit;
}

#!ifdef WITH_BLOCK3XX
# block call redirect based on 3xx replies.
if (t_check_status("3[0-9][0-9]")) {
t_reply("404","Not found");
exit;
}
#!endif

#!ifdef WITH_VOICEMAIL
# serial forking
# - route to voicemail on busy or no answer (timeout)
if (t_check_status("486|408")) {
route(TOVOICEMAIL);
exit;
}
#!endif
}

#!ifdef WITH_ASTERISK
# Test if coming from Asterisk
route[FROMASTERISK] {
if(ds_is_from_list()){

return 1;
}
return -1;
}

route[TOASTERISK] {
ds_mark_dst("P");
if(!ds_select_dst("1", "9")) {
sl_send_reply("500", "Service Unavailable");

exit;
}



route(RELAY);
exit;
}


# Forward REGISTER to Asterisk
route[REGFWD] {
if(!is_method("REGISTER"))
{
return;
}
$var(rip) = $sel(cfg_get.asterisk.bindip);
$uac_req(method)="REGISTER";
$uac_req(ruri)="sip:" + $var(rip) + ":" + $sel(cfg_get.asterisk.bindport);
$uac_req(furi)="sip:" + $au + "@" + $var(rip);
$uac_req(turi)="sip:" + $au + "@" + $var(rip);
$uac_req(hdrs)="Contact: <sip:" + $au + "@"
+ $sel(cfg_get.kamailio.bindip)
+ ":" + $sel(cfg_get.kamailio.bindport) + ">\r\n";
if($sel(contact.expires) != $null)
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $sel(contact.expires) + "\r\n";
else
$uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $hdr(Expires) + "\r\n";
uac_req_send();
}
#!endif

最佳答案

您需要使用 Kamailio 调度程序模块。

您将拥有一个dispatcher.list,例如:

# group  sip addresses of your asterisk boxen
1 sip:10.1.2.3:5060
1 sip:10.1.2.4:5060
1 sip:10.1.2.5:5060

还有一个 kamailio.cfg 配置如下:

loadmodule("dispatcher.so")

...

if ( method=="INVITE" ) {
# dst_select( "GROUP", "HASH METHOD")
ds_select_dst("1","4");
sl_send_reply("100","Trying");
forward();#uri:host, uri:port);
exit();
}

此外,kamailio has an example in their wiki 。您还可以找到有关dispatcher for Kamailio 4.3 in the docs的更多信息。 .

附: Stackexchange 提示:如果您愿意记录您尝试过的步骤,并发布您的具体配置并解释哪些有效和无效,而不是一般性概述,您将获得更多回复。

<小时/>

检查已发送的 Asterisk 盒子的运行状况。当 Asterisk 框关闭时进行路由前进。您应该检查盒子的健康状况。您也可以使用调度程序来执行此操作。当发出诸如“优雅地关闭核心”之类的命令时,这也应该使一个盒子停止旋转,这将使 Asterisk 开始以“不可用”响应进行响应。

modparam("dispatcher", "ds_probing_mode", 1)
modparam("dispatcher", "ds_ping_interval", 15)
modparam("dispatcher", "ds_probing_threshold", 1)
modparam("dispatcher", "ds_ping_reply_codes", "class=2;class=3;class=4")

关于asterisk - 如何使用负载平衡和 Asterisk 配置kamailio服务器?,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/29312037/

27 4 0
Copyright 2021 - 2024 cfsdn All Rights Reserved 蜀ICP备2022000587号
广告合作:1813099741@qq.com 6ren.com