- html - 出于某种原因,IE8 对我的 Sass 文件中继承的 html5 CSS 不友好?
- JMeter 在响应断言中使用 span 标签的问题
- html - 在 :hover and :active? 上具有不同效果的 CSS 动画
- html - 相对于居中的 html 内容固定的 CSS 重复背景?
收到错误 InvalidArgumentException 无法使用 smtp 驱动程序在 Lumen 上解析 [Illuminate\Mail\TransportManager] 的 NULL 驱动程序。我按照lumen文档中设置邮件的所有步骤进行操作。这是我的环境
MAIL_DRIVER=smtp
MAIL_HOST=domain.com
MAIL_PORT=465
<a href="https://stackoverflow.com/cdn-cgi/l/email-protection" class="__cf_email__" data-cfemail="571a161e1b080204120519161a126a2224322539363a321733383a363e397934383a" rel="noreferrer noopener nofollow">[email protected]</a>
MAIL_PASSWORD=password
MAIL_ENCRYPTION=tls
MAIL_FROM_ADDRESS=no-reply@<a href="https://stackoverflow.com/cdn-cgi/l/email-protection" class="__cf_email__" data-cfemail="add8dec8dfc3ccc0c8edc9c2c0ccc4c383cec2c0" rel="noreferrer noopener nofollow">[email protected]</a>
MAIL_FROM_NAME="Company name"
将 laravel 存储库中的 mail.php 添加到 lumen.../config 文件夹
<?php
return [
/*
|--------------------------------------------------------------------------
| Default Mailer
|--------------------------------------------------------------------------
|
| This option controls the default mailer that is used to send any email
| messages sent by your application. Alternative mailers may be setup
| and used as needed; however, this mailer will be used by default.
|
*/
'default' => env('MAIL_MAILER', 'smtp'),
/*
|--------------------------------------------------------------------------
| Mailer Configurations
|--------------------------------------------------------------------------
|
| Here you may configure all of the mailers used by your application plus
| their respective settings. Several examples have been configured for
| you and you are free to add your own as your application requires.
|
| Laravel supports a variety of mail "transport" drivers to be used while
| sending an e-mail. You will specify which one you are using for your
| mailers below. You are free to add additional mailers as required.
|
| Supported: "smtp", "sendmail", "mailgun", "ses",
| "postmark", "log", "array"
|
*/
'mailers' => [
'smtp' => [
'transport' => 'smtp',
'host' => env('MAIL_HOST', 'smtp.mailgun.org'),
'port' => env('MAIL_PORT', 587),
'encryption' => env('MAIL_ENCRYPTION', 'tls'),
'username' => env('MAIL_USERNAME'),
'password' => env('MAIL_PASSWORD'),
'timeout' => null,
'auth_mode' => null,
],
'ses' => [
'transport' => 'ses',
],
'mailgun' => [
'transport' => 'mailgun',
],
'postmark' => [
'transport' => 'postmark',
],
'sendmail' => [
'transport' => 'sendmail',
'path' => '/usr/sbin/sendmail -bs',
],
'log' => [
'transport' => 'log',
'channel' => env('MAIL_LOG_CHANNEL'),
],
'array' => [
'transport' => 'array',
],
],
/*
|--------------------------------------------------------------------------
| Global "From" Address
|--------------------------------------------------------------------------
|
| You may wish for all e-mails sent by your application to be sent from
| the same address. Here, you may specify a name and address that is
| used globally for all e-mails that are sent by your application.
|
*/
'from' => [
'address' => env('MAIL_FROM_ADDRESS', '<a href="https://stackoverflow.com/cdn-cgi/l/email-protection" class="__cf_email__" data-cfemail="90f8f5fcfcffd0f5e8f1fde0fcf5bef3fffd" rel="noreferrer noopener nofollow">[email protected]</a>'),
'name' => env('MAIL_FROM_NAME', 'Example'),
],
/*
|--------------------------------------------------------------------------
| Markdown Mail Settings
|--------------------------------------------------------------------------
|
| If you are using Markdown based email rendering, you may configure your
| theme and component paths here, allowing you to customize the design
| of the emails. Or, you may simply stick with the Laravel defaults!
|
*/
'markdown' => [
'theme' => 'default',
'paths' => [
resource_path('views/vendor/mail'),
],
],
];
将以下内容添加到 bootstrap 中的 app.php
$app->register(Illuminate\Mail\MailServiceProvider::class);
$app->configure('mail');
$app->configure('services');
$app->alias('mailer', Illuminate\Mail\Mailer::class);
$app->alias('mailer', Illuminate\Contracts\Mail\Mailer::class);
$app->alias('mailer', Illuminate\Contracts\Mail\MailQueue::class);
发送邮件的实现
public function testMail()
{
Mail::to('<a href="https://stackoverflow.com/cdn-cgi/l/email-protection" class="__cf_email__" data-cfemail="bdc8ced8cfd3dcd0d88ffdd9d2d0dcd4d393ded2d093ded2d0" rel="noreferrer noopener nofollow">[email protected]</a>')->send(new MailableClass('George','Kindly note that your email has been sent'));
}
MailableClass 只是一个扩展 Mailable 来构建 View 的类
我还对返回此的配置('mail')进行了数据转储
array:4 [▼
"default" => "smtp"
"mailers" => array:7 [▼
"smtp" => array:8 [▼
"transport" => "smtp"
"host" => "<a href="https://stackoverflow.com/cdn-cgi/l/email-protection" class="__cf_email__" data-cfemail="e79294829589868a82a783888a868e89c984888a" rel="noreferrer noopener nofollow">[email protected]</a>"
"port" => "465"
"encryption" => "tls"
"username" => "<a href="https://stackoverflow.com/cdn-cgi/l/email-protection" class="__cf_email__" data-cfemail="87f2f4e2f5e9e6eae2c7e3e8eae6eee9a9e4e8ea" rel="noreferrer noopener nofollow">[email protected]</a>"
"password" => "password"
"timeout" => null
"auth_mode" => null
]
"ses" => array:1 [▶]
"mailgun" => array:1 [▶]
"postmark" => array:1 [▶]
"sendmail" => array:2 [▶]
"log" => array:2 [▶]
"array" => array:1 [▶]
]
"from" => array:2 [▶]
"markdown" => array:2 [▶]
我检查了Illumina/mail中的Manager.php和TransportManager.php文件当我将驱动程序函数的驱动程序值设置为“smtp”时,我能够传递给 TransportManager.php 的 createSmtpDriver() 。您可以在此处查看相应的代码...
/**
* Get a driver instance.
*
* @param string $driver
* @return mixed
*
* @throws \InvalidArgumentException
*/
public function driver($driver = "smtp") //originally $driver = null
{
$driver = $driver ?: $this->getDefaultDriver();
if (is_null($driver)) {
throw new InvalidArgumentException(sprintf(
'Unable to resolve NULL driver for [%s].', static::class
));
}
// If the given driver has not been created before, we will create the instances
// here and cache it so we can return it next time very quickly. If there is
// already a driver created by this name, we'll just return that instance.
if (! isset($this->drivers[$driver])) {
$this->drivers[$driver] = $this->createDriver($driver);
}
return $this->drivers[$driver];
}
我在createSmtpDriver()中做了一个dd
protected function createSmtpDriver()
{
$config = $this->app->make('config')->get('mail');
**dd($config);**
// The Swift SMTP transport instance will allow us to use any SMTP backend
// for delivering mail such as Sendgrid, Amazon SES, or a custom server
// a developer has available. We will just pass this configured host.
$transport = new SmtpTransport($config['host'], $config['port']);
if (isset($config['encryption'])) {
$transport->setEncryption($config['encryption']);
}
// Once we have the transport we will check for the presence of a username
// and password. If we have it we will set the credentials on the Swift
// transporter instance so that we'll properly authenticate delivery.
if (isset($config['username'])) {
$transport->setUsername($config['username']);
$transport->setPassword($config['password']);
}
// Next we will set any stream context options specified for the transport
// and then return it. The option is not required any may not be inside
// the configuration array at all so we'll verify that before adding.
if (isset($config['stream'])) {
$transport->setStreamOptions($config['stream']);
}
return $transport;
}
这个 dd 的结果基本上是上面 config('mail') 中的结果,从中我们可以看到 config['host'], config['port'] ..etc 不会返回任何内容,因为它们位于mailer 所以我认为它应该是 config['mailer']['host'] 相反...但这些都是框架文件所以...
我非常感谢您提供的帮助来解决这个问题。完全不知道我做错了什么。谢谢
哦对了忘了我也安装了..
composer require guzzlehttp/guzzle
谢谢
最佳答案
所以我基本上将从 Laravel 存储库获得的 mail.php 替换为这个基本的
<?php
return [
/*
|--------------------------------------------------------------------------
| Mail Driver
|--------------------------------------------------------------------------
|
| Laravel supports both SMTP and PHP's "mail" function as drivers for the
| sending of e-mail. You may specify which one you're using throughout
| your application here. By default, Laravel is setup for SMTP mail.
|
| Supported: "smtp", "sendmail", "mailgun", "mandrill", "ses",
| "sparkpost", "log", "array"
|
*/
'driver' => env('MAIL_DRIVER', 'smtp'),
/*
|--------------------------------------------------------------------------
| SMTP Host Address
|--------------------------------------------------------------------------
|
| Here you may provide the host address of the SMTP server used by your
| applications. A default option is provided that is compatible with
| the Mailgun mail service which will provide reliable deliveries.
|
*/
'host' => env('MAIL_HOST', 'smtp.mailgun.org'),
/*
|--------------------------------------------------------------------------
| SMTP Host Port
|--------------------------------------------------------------------------
|
| This is the SMTP port used by your application to deliver e-mails to
| users of the application. Like the host we have set this value to
| stay compatible with the Mailgun e-mail application by default.
|
*/
'port' => env('MAIL_PORT', 587),
/*
|--------------------------------------------------------------------------
| Global "From" Address
|--------------------------------------------------------------------------
|
| You may wish for all e-mails sent by your application to be sent from
| the same address. Here, you may specify a name and address that is
| used globally for all e-mails that are sent by your application.
|
*/
'from' => [
'address' => env('MAIL_FROM_ADDRESS', '<a href="https://stackoverflow.com/cdn-cgi/l/email-protection" class="__cf_email__" data-cfemail="0f676a6363604f6a776e627f636a216c6062" rel="noreferrer noopener nofollow">[email protected]</a>'),
'name' => env('MAIL_FROM_NAME', 'Example'),
],
/*
|--------------------------------------------------------------------------
| E-Mail Encryption Protocol
|--------------------------------------------------------------------------
|
| Here you may specify the encryption protocol that should be used when
| the application send e-mail messages. A sensible default using the
| transport layer security protocol should provide great security.
|
*/
'encryption' => env('MAIL_ENCRYPTION', 'tls'),
/*
|--------------------------------------------------------------------------
| SMTP Server Username
|--------------------------------------------------------------------------
|
| If your SMTP server requires a username for authentication, you should
| set it here. This will get used to authenticate with your server on
| connection. You may also set the "password" value below this one.
|
*/
'username' => env('MAIL_USERNAME'),
'password' => env('MAIL_PASSWORD'),
/*
|--------------------------------------------------------------------------
| Sendmail System Path
|--------------------------------------------------------------------------
|
| When using the "sendmail" driver to send e-mails, we will need to know
| the path to where Sendmail lives on this server. A default path has
| been provided here, which will work well on most of your systems.
|
*/
'sendmail' => '/usr/sbin/sendmail -bs',
/*
|--------------------------------------------------------------------------
| Markdown Mail Settings
|--------------------------------------------------------------------------
|
| If you are using Markdown based email rendering, you may configure your
| theme and component paths here, allowing you to customize the design
| of the emails. Or, you may simply stick with the Laravel defaults!
|
*/
'markdown' => [
'theme' => 'default',
'paths' => [
resource_path('views/vendor/mail'),
],
],
];
现在可以了
关于php - 无法解析 [Illuminate\Mail\TransportManager] 的 NULL 驱动程序。用于流明框架,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/61946659/
我正在尝试为基于 arm 的板交叉编译驱动程序。在 make 文件中,包含文件的搜索路径是主机内核的路径,即它指向 ubuntu 附带的 linux 头文件。我在主机系统(i7/ubuntu)上也有目
1、准备材料 开发板(正点原子stm32f407探索者开发板V2.4) 。 STM32CubeMX软件(Version 6.10.0) 。 野火DAP仿真器 。 keil µVis
是否可以通过 c# 应用程序“驱动”excel(即从 excel gui 下拉列表中选择某些内容,按下按钮并读取特定单元格的内容)? 这并不是真正用于测试,而是用于类似于 selenium 的数据报废
给定任何具有超过 5 个 View 和 View 模型的中间 MVVM 应用程序,是否有任何推荐的设计模式来说明如何为此类应用程序搭建脚手架? 现在我通常有一个在 App.OnStartup 中创建的
我想知道如何使用曼哈顿距离启发式来驱动 NxN 二维数组中的搜索。我有以下曼哈顿距离: private int manhattan(int[] pos, int tile) { int
我试图了解 CUmodule 在 CUDA 驱动程序 API 函数中实际上代表什么。 许多 CUDA 驱动程序 API 函数都有一个 CUmodule 句柄,但它是什么?它是引导驱动程序调用过程的 d
我正在尝试创建一个 java 程序,它将创建 excel 文件并将其上传到谷歌驱动器中。上传后我需要它来授予权限。我已经完成了所有这些,但问题在于尝试将 excel 文件转换为 google 文件,以
我正在拼命尝试从 Linux(Raspbian 内核 4.4.12-v7+)与使用 TIUSB3410 USB 部件的设备进行通信。 这是 dmesg 的输出: [ 2730.016013] usb
我有一个关于在 PCIe 上使用突发读写的问题。我有一个 fpga,它通过 PCIe 连接到 cpu。我有一个简单的驱动程序,仅用于测试。驱动程序向 FPGA 写入数据以及从 FPGA 读取数据。 f
我有大约 500 条通往特定页面的可能路径,我需要测试所有这些路径。该页面的每个路径看起来都类似于此(使用 PHP 网络驱动程序;通常有大约 10 个步骤): // Navigate to form
如果chrome驱动的版本和当前的chrome版本不同,我想写一个python代码,下载并运行与当前chrome版本匹配的chrome驱动。 这就是我一直在寻找的东西 driver = webdriv
我在 Centos 7 Linux 机器上尝试通过 pyodbc 连接到 SQL 数据库。我了解到您需要设置 DSN,您可以通过安装 freetds 驱动程序并执行以下操作来实现: import py
是否可以使用 NUnit 通过 NDepend 运行 CQL 查询?如果能够将 NDepend dll 包含在 UnitTests 库中并编写如下测试,那就太好了: [Test] public voi
我在 cassandra 中有巨大的表,超过 20 亿行并且还在增加。这些行有一个日期字段,它遵循日期桶模式以限制每一行。 即便如此,对于某个特定日期,我也有超过一百万条条目。 我想尽快读取和处理每一
考虑以下示例,其中一个模块的输出 (inner::out) 应该驱动两个输出(outer::out 和 outer::out2) 的上层层次: #include SC_MODULE(inner) {
我不确定是否可以有一个具有多个 MySQL 根的连接器。当我尝试只使用一根根时,它效果完美。我的有 2 个根的代码如下所示: [ 'locale' => 'es_ES.UTF-8',
我的桌面APP无法注册Mysql JDBC驱动 我下载mysql-connector-java-5.1.16.zip 解压mysql-connector-java-5.1.16-bin.jar并将其放
我有一个无限循环等待输入的 python 脚本,然后输入发生时做一些事情。我的问题是制作 python告诉 emacs 做某事。我只需要一些方法来发送 emacs 输入并让 emacs 评估该输入。
我最初问的没有明确说明我的问题/问题,所以我会更好地解释它。我有一个将 JDialog 设置为可见的 JButton。 JDialog 有一个 WindowListener 将其设置为在 window
假设“doc”是我想插入到 MongoDB 集合中的一些文档,而“collection”是我要将文档插入到的集合。 我有如下内容: try { WriteConcern wc = new Wr
我是一名优秀的程序员,十分优秀!