- html - 出于某种原因,IE8 对我的 Sass 文件中继承的 html5 CSS 不友好?
- JMeter 在响应断言中使用 span 标签的问题
- html - 在 :hover and :active? 上具有不同效果的 CSS 动画
- html - 相对于居中的 html 内容固定的 CSS 重复背景?
我在我的 CentOS 6.4 服务器上全新安装了 GitLab。
在此之前,我只是使用 Github(在 HTTP 模式下),所以我对这一切都很陌生。
我为我的用户创建了一个 key ,将其添加到 ~/.ssh/authorized_keys 和 GitLab 中。
ssh-keygen -t rsa -C "arthur@domain.tld"
cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys
git push origin master
git@git.domain.tld's password:
fatal: 'arthur/repo.git' does not appear to be a git repository
fatal: The remote end hung up unexpectedly
ssh -vvvT sa_gitlab@git.hoa.ro
OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to git.hoa.ro [88.191.160.53] port 22.
debug1: Connection established.
debug1: permanently_set_uid: 0/0
debug1: identity file /root/.ssh/identity type -1
debug1: identity file /root/.ssh/id_rsa type -1
debug1: identity file /root/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3
debug1: match: OpenSSH_5.3 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.3
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug3: Wrote 792 bytes for a total of 813
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib@openssh.com,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc@lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64@openssh.com,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit: none,zlib@openssh.com
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug3: Wrote 24 bytes for a total of 837
debug2: dh_gen_key: priv key bits set: 120/256
debug2: bits set: 504/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: Wrote 144 bytes for a total of 981
debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 1
debug3: check_host_in_hostfile: filename /root/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 1
debug1: Host 'git.hoa.ro' is known and matches the RSA host key.
debug1: Found key in /root/.ssh/known_hosts:1
debug2: bits set: 511/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug3: Wrote 16 bytes for a total of 997
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug3: Wrote 48 bytes for a total of 1045
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /root/.ssh/identity ((nil))
debug2: key: /root/.ssh/id_rsa ((nil))
debug2: key: /root/.ssh/id_dsa ((nil))
debug3: Wrote 80 bytes for a total of 1125
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
debug3: start over, passed a different list publickey,gssapi-keyex,gssapi-with-mic,password
debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup gssapi-keyex
debug3: remaining preferred: gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_is_enabled gssapi-keyex
debug1: Next authentication method: gssapi-keyex
debug1: No valid Key exchange context
debug2: we did not send a packet, disable method
debug3: authmethod_lookup gssapi-with-mic
debug3: remaining preferred: publickey,keyboard-interactive,password
debug3: authmethod_is_enabled gssapi-with-mic
debug1: Next authentication method: gssapi-with-mic
debug3: Trying to reverse map address 88.191.160.53.
debug1: Unspecified GSS failure. Minor code may provide more information
Credentials cache file '/tmp/krb5cc_0' not found
debug1: Unspecified GSS failure. Minor code may provide more information
Credentials cache file '/tmp/krb5cc_0' not found
debug1: Unspecified GSS failure. Minor code may provide more information
debug1: Unspecified GSS failure. Minor code may provide more information
Credentials cache file '/tmp/krb5cc_0' not found
debug2: we did not send a packet, disable method
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /root/.ssh/identity
debug3: no such identity: /root/.ssh/identity
debug1: Trying private key: /root/.ssh/id_rsa
debug3: no such identity: /root/.ssh/id_rsa
debug1: Trying private key: /root/.ssh/id_dsa
debug3: no such identity: /root/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
sa_gitlab@git.hoa.ro's password:
最佳答案
I've created a key for my user, added it in ~/.ssh/authorized_keys and in GitLab
~/.ssh/authorized_keys
中添加您的公钥: 唯一的
authorized_keys
修改后的文件是:
id_rsa
/
id_rsa.pub
在客户端创建于
$HOME/.ssh
(或
%HOME%/.ssh
on Windows ),并通过 GitLab GUI 注册公钥。
关于使用 SSH 的 Git 存储库,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/15751215/
任何人都知道如何将内容从一个 Magnolia CMS 存储库(Jackrabbit 存储库)传输/迁移到我们的应用程序使用的另一个自定义 jacrabbit 存储库? 最佳答案 正如另一张海报所建议
Git 是否支持任何允许我直接从本地/工作树提交到远程存储库的命令?正常的工作流程至少需要一个“git add”来用文件内容的副本等填充对象数据库。 我知道这不是正常的、预期的 Git 工作流程。但我
我们正在将 Git 存储库移动到新服务器。迁移后我们显然可以只删除旧的存储库,所以当人们尝试推送或 pull 时他们会得到一个错误并在 wiki 上查找新的存储库 URL,但是是否有可能阻止 pull
我们有两个 Subversion 存储库,每个存储库都有一个项目。所以: svn://server/svn/project_a svn://server/svn/project_b 它们是独立的项目,
使用 maven/tycho 构建 Nodeclipse Eclipse 插件每个版本都有新的 p2 存储库。 发布是在 Bintray 上完成的不允许更新文件。所以每个版本都在它的文件夹中。 Bas
这听起来有点复杂,让我解释一下: Project_A 在它自己的 Mercurial 存储库中已经存在了一段时间。 Project_A 现在被 merge 到一个新的 super 项目 Super-P
这听起来有点复杂,所以让我解释一下: Project_A 已在其自己的 Mercurial 存储库中存在了一段时间。 Project_A 现在正在 merge 到一个新的 super 项目 Super
我想将我的所有文件从 Git Repo A 移动到 Git Repo B 并具有完整的历史记录。 Git B 已经包含另一个项目文件。我尝试了几种方法,例如 How to move files fro
我从 github 中托管的公共(public) git 存储库创建了一个裸存储库 (MY_LOCAL_REP): ~$ git clone --bare github 存储库已更新(创建了一个分支
工作 SVN 库 我正在启动一个 git 存储库来与 svn 存储库进行交互。 svn 存储库已设置并且工作正常,其中包含一个基本 README 文件的单次提交。 检查它工作正常: tchalvak:
我正在使用 spring boot 1.5.2 和 spring boot data redis 1.8。 我有两个@Id 注解,一个用于JPA,另一个用于redis hash。这里我想使用 JPA
我是 maven 的新手。我仍然无法理解它的概念。 例如,我正在寻找 com.extjs:gxt:jar:2.2.5 或 org.syslog4j:syslog4j:jar:0.9.46。我在任何 r
我已经阅读了很多关于存储库模式和服务层的作用的书,我(我认为)很清楚这两者之间的区别。但是现在有一个简单的问题让我挠头了一段时间。 我知道数据访问层如何负责...访问数据,因此典型的存储库可能具有插入
我是 Git/Smartgit 的新手。现在我不得不在 WIN 10 下配置一台新 PC。请问我如何将设置和存储库从旧 PC 导出/导入到新 PC? 非常感谢,问候, 本德 最佳答案 SmartGit
所以我最近开始在我的工作项目中使用存储库模式。我一直遇到同样的问题,我似乎无法找到答案: 可以将另一个存储库注入(inject)现有存储库吗?这样做有什么负面影响? 例如 : class Crawls
我有一个应用程序容器推送到 gitlab 容器注册表。我正在尝试将其作为容器部署到 azure web 应用程序服务中。我根据azure的文档尽我所能地进行了配置。但我不明白我错过了什么,因为 azu
我使用java框架来开发crud应用程序。这个框架被称为:“Cuba.Platform”。 我的问题是,我无法在古巴打开该项目。当我尝试在那里打开我的项目时,我遇到了这个问题: “存储库包含 http
我在我的数据层中有几个对数据库执行 CRUD 操作的存储库类。我不确定这种设计,因为大多数表都需要每个存储库一个专用类,一段时间后我最终会为数据库中存在的每个表得到很多存储库。我这样做是因为,当然,我
我正在重构一些代码,并将一些执行数据库 CRUD 操作的方法提取到它们自己的存储库类中。 我有几个问题,鉴于以下两种类型的对象存储在数据库中:用户和角色 我应该创建 IUserRepository 和
尝试在这里创建一个非常简单的存储库和服务层模式。 (.NET 4、C#、LINQ,尽管这个问题部分与语言无关)。注意:这只是研发。 我的目标是尽量减少服务层中方法定义的数量。 这是我的存储合约: in
我是一名优秀的程序员,十分优秀!