visual-studio-2008 - ClearCase 与 Visual Studio 的集成

Question

我试图打开一个由 IBM ClearCase 控制的项目源代码，但它向我显示了这条消息:

The project '[MyProject]' is under source control. 
An error occurred registering this project with source control. 
It is recommended that you do not make any changes to this project.

我只是不知道该怎么办。我已经重新安装了所有东西。已安装 Visual Studio 集成，但它一直显示错误消息。

有人知道这个的解决方案吗？

回答:我有一个解决方案。我刚刚在 Tools -> SourceControl 中选择了 ClearCase

Answer 1

IBM Technote swg21267165提及:

Errors and Warnings about ClearCase and VS.NET integration using VSIP bindings

This issue is seen if the integration between ClearCase and VS .NET is broken or if the solution file and projects were not converted properly to use VSIP bindings if the solution file and projects were developed in a previous integration of ClearCase and VS .NET.

The bindings and source control information referencing each project associated to a specific solution do not contain the same information for the correct source code control provider.

因此请按照此 IBM 技术说明的建议仔细检查您的解决方案文件和项目文件(.csproj、.vcproj ...)。

1. Verify that ClearCase and VS .NET are integrated correctly using the indicators mentioned above.
2. If the two applications are not integrated correctly, then follow the procedure in technote 1259189 on how to integrate the full ClearCase client with VS .NET 2003/2005 or technote 1319889 for integrating the CCRC plug-in with VS .NET 2005.
3. Once the two applications have been successfully integrated then the projects must be converted to use the new VSIP bindings. Follow technote 1254745 on how to convert projects that were created using the old MSSCCI bindings. This is necessary in order for the solution file and projects to continue to be used after an upgrade requiring the bindings to be changed to reflect a new source code control configuration.