- html - 出于某种原因,IE8 对我的 Sass 文件中继承的 html5 CSS 不友好?
- JMeter 在响应断言中使用 span 标签的问题
- html - 在 :hover and :active? 上具有不同效果的 CSS 动画
- html - 相对于居中的 html 内容固定的 CSS 重复背景?
我有一个使用 ramdisk 引导的嵌入式 Linux 系统,因此它在运行时没有可用的持久存储(它有闪存来存储内核和 ramdisk)。
唯一的连接是 RS-232 串行登录控制台。所以我受限于其内置的 busybox 所提供的功能。我想找回 ramdisk,修改它,重写 ramdisk。内核没有内置的 Flash 文件系统支持。 ramdisk 分区大小约为 10 MBytes。删除用户目录下的所有文件后,可用的虚拟磁盘大小约为 14 MBytes。
命令 dd 可用,因此我可以将 ramdisk 分区复制到 ramdisk,并可以从 ramdisk 文件写入闪存。 flashcp 也可用。
所以我现在的问题是如何通过 RS-232 串行控制台接收和发送二进制文件?
我研究了以下内容,但没有一个对我有用:
主要是因为 x/y/zmodem 在 busybox 中不可用。
有什么想法吗?谢谢!
根据要求,这是我应该首先包含的内容。
可用的 u-boot 命令:
U-Boot >?
? - alias for 'help'
askenv - get environment variables from stdin
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootm - boot application image from memory
cmp - memory compare
coninfo - print console devices and information
cp - memory copy
crc32 - checksum calculation
crc32_chk_uimage- checksum calculation of an image for u-boot
echo - echo args to console
editenv - edit environment variable
env - environment handling commands
exit - exit script
false - do nothing, unsuccessfully
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls - list files in a directory (default /)
fatwrite- write file into a dos filesystem
go - start application at address 'addr'
gpio - input/set/clear/toggle gpio pins
help - print command description/usage
i2c - I2C sub-system
iminfo - print header information for application image
imxtract- extract a part of a multi-image
itest - return true/false on integer compare
loadb - load binary file over serial line (kermit mode)
loads - load S-Record file over serial line
loady - load binary file over serial line (ymodem mode)
loop - infinite loop on address range
md - memory display
mdc - memory display cyclic
mm - memory modify (auto-incrementing address)
mw - memory write (fill)
mwc - memory write cyclic
nm - memory modify (constant address)
printenv- print environment variables
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
saves - save S-Record file over serial line
setenv - set environment variables
sf - SPI flash sub-system
showvar - print local hushshell variables
sleep - delay execution for some time
source - run script from memory
sspi - SPI utility command
test - minimal test like /bin/sh
true - do nothing, successfully
usb - USB sub-system
usbboot - boot from USB device
version - print monitor, compiler and linker version
U-Boot >
可用的 busybox 命令:
BusyBox v1.13.2 (2015-03-16 10:50:56 EDT) multi-call binary
Copyright (C) 1998-2008 Erik Andersen, Rob Landley, Denys Vlasenko
and others. Licensed under GPLv2.
See source distribution for full notice.
Usage: busybox [function] [arguments]...
or: function [arguments]...
BusyBox is a multi-call binary that combines many common Unix
utilities into a single executable. Most people will create a
link to busybox for each function they wish to use and BusyBox
will act like whatever it was invoked as!
Currently defined functions:
[, [[, addgroup, adduser, ar, ash, awk, basename, blkid,
bunzip2, bzcat, cat, chattr, chgrp, chmod, chown, chpasswd,
chroot, chvt, clear, cmp, cp, cpio, cryptpw, cut, date,
dc, dd, deallocvt, delgroup, deluser, df, dhcprelay, diff,
dirname, dmesg, du, dumpkmap, dumpleases, echo, egrep, env,
expr, false, fbset, fbsplash, fdisk, fgrep, find, free,
freeramdisk, fsck, fsck.minix, fuser, getopt, getty, grep,
gunzip, gzip, halt, head, hexdump, hostname, httpd, hwclock,
id, ifconfig, ifdown, ifup, inetd, init, insmod, ip, kill,
killall, klogd, last, less, linuxrc, ln, loadfont, loadkmap,
logger, login, logname, logread, losetup, ls, lsmod, makedevs,
md5sum, mdev, microcom, mkdir, mkfifo, mkfs.minix, mknod,
mkswap, mktemp, modprobe, more, mount, mv, nc, netstat,
nice, nohup, nslookup, od, openvt, passwd, patch, pidof,
ping, ping6, pivot_root, poweroff, printf, ps, pwd, rdate,
rdev, readahead, readlink, readprofile, realpath, reboot,
renice, reset, rm, rmdir, rmmod, route, rtcwake, run-parts,
sed, seq, setconsole, setfont, sh, showkey, sleep, sort,
start-stop-daemon, strings, stty, su, sulogin, swapoff,
swapon, switch_root, sync, sysctl, syslogd, tail, tar, tcpsvd,
tee, telnet, telnetd, test, tftp, tftpd, time, top, touch,
tr, traceroute, true, tty, udhcpc, udhcpd, udpsvd, umount,
uname, uniq, unzip, uptime, usleep, vconfig, vi, vlock,
watch, wc, wget, which, who, whoami, xargs, yes, zcat
最佳答案
在 uboot 中你可以使用 loady/loadx
通过 uart 从 pc 获取文件。我通常使用 teraterm 来发送文件。
流程应该是这样的:
关于binary - 如何将二进制闪存文件发送到只有串行控制台的嵌入式系统?,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/44595089/
我有这个代码: System.err.print("number of terms = "); System.out.println(allTerms.size()); System.err
我有以下问题:在操作系统是 Linux 的情况下和在操作系统是 MacOs 的情况下,我必须执行不同的操作。 所以我创建了以下 Ant 脚本目标: /u
我正在调用 system("bash ../tools/bashScript\"This is an argument!\"&"),然后我正在调用 close(socketFD) 直接在 system
使用最初生成的随机元素来约束随机数组的连续元素是否有效。 例如:我想生成一组 10 个 addr、size 对来模拟典型的内存分配例程并具有如下类: class abc; rand bit[5:0
我正在创建一个必须使用system(const char*)函数来完成一些“繁重工作”的应用程序,并且我需要能够为用户提供粗略的进度百分比。例如,如果操作系统正在为您移动文件,它会为您提供一个进度条,
我即将编写一些项目经理、开发人员和业务分析师会使用的标准/指南和模板。目标是更好地理解正在开发或已经开发的解决方案。 其中一部分是提供有关记录解决方案的标准/指南。例如。记录解决/满足业务案例/用户需
在开发使用压缩磁盘索引或磁盘文件的应用程序时,其中部分索引或文件被重复访问(为了论证,让我们说一些类似于 Zipfian 分布的东西),我想知道什么时候足够/更好地依赖操作系统级缓存(例如,Debia
我们编写了一个 powershell 脚本,用于处理来自内部系统的图像并将其发送到另一个系统。现在,业务的另一部分希望加入其中,对数据进行自己的处理,并将其推送到另一个系统。打听了一下,公司周围有几个
我正在尝试朗姆酒我的应用程序,但我收到以下错误:System.Web.HttpUnhandledException:引发了“System.Web.HttpUnhandledException”类型的异
关闭。这个问题不符合Stack Overflow guidelines .它目前不接受答案。 要求我们推荐或查找工具、库或最喜欢的场外资源的问题对于 Stack Overflow 来说是偏离主题的,
所以我在其他程序中没有收到此错误,但我在这个程序中收到了它。 这个程序是一个我没有收到错误的示例。 #include int main() { system("pause"); } // en
我在 c# System.URI.FormatExption 中遇到问题 为了清楚起见,我使用的是 Segseuil 的 Matlab 方法,并且它返回一个图片路径 result。我想为其他用户保存此
我正在尝试像这样设置文本框的背景色: txtCompanyName.BackColor = Drawing.Color.WhiteSmoke; 它不喜欢它,因为它要我在前面添加系统,例如: txtCo
请帮助我解决 System.StackOverflowException我想用 .aspx 将记录写入数据库我使用 4 层架构来实现这一切都正常但是当我编译页面然后它显示要插入数据的字段时,当我将数据
我使用了一些通常由系统调用的API。 因此,我将 android:sharedUserId="android.uid.system" 添加到 manifest.xml, 并使用来自 GIT 的 And
我正在尝试创建一个小型应用程序,它需要对/system 文件夹进行读/写访问(它正在尝试删除一个文件,并创建一个新文件来代替它)。我可以使用 adb 毫无问题地重新挂载该文件夹,如果我这样做,我的应用
我想从没有 su 的系统 priv-app 将/system 重新挂载为 RW。如何以编程方式执行此操作?只会用 Runtime.getruntime().exec() 执行一个 shell 命令吗
我正在尝试制作一个带有登录系统的程序我对此很陌生,但我已经连续工作 8 个小时试图解决这个问题。这是我得到的错误代码 + ServerVersion 'con.ServerVersion' threw
当我“构建并运行”Code::Blocks 中的程序时,它运行得非常好!但是当我从“/bin”文件夹手动运行它时,当它试图用 system() 调用“temp.bat”时,它会重置。这是为什么?它没有
我想使用 system/pipe 命令来执行具有特殊字符的命令。下面是示例代码。通过系统/管道执行命令后,它通过改变特殊字符来改变命令。我很惊讶地看到系统命令正在更改作为命令传递的文本。 run(ch
我是一名优秀的程序员,十分优秀!