- html - 出于某种原因,IE8 对我的 Sass 文件中继承的 html5 CSS 不友好?
- JMeter 在响应断言中使用 span 标签的问题
- html - 在 :hover and :active? 上具有不同效果的 CSS 动画
- html - 相对于居中的 html 内容固定的 CSS 重复背景?
我正在尝试运行Kubernetes并尝试使用sudo kubeadm init
。
根据官方文档的建议,交换已关闭。
问题是它显示警告:
[kubelet-check] It seems like the kubelet isn't running or healthy.
[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get http://localhost:10248/healthz: dial tcp 127.0.0.1:10248: connect: connection refused.
[kubelet-check] It seems like the kubelet isn't running or healthy.
[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get http://localhost:10248/healthz: dial tcp 127.0.0.1:10248: connect: connection refused.
[kubelet-check] It seems like the kubelet isn't running or healthy.
[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get http://localhost:10248/healthz: dial tcp 127.0.0.1:10248: connect: connection refused.
[kubelet-check] It seems like the kubelet isn't running or healthy.
[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get http://localhost:10248/healthz: dial tcp 127.0.0.1:10248: connect: connection refused.
[kubelet-check] It seems like the kubelet isn't running or healthy.
[kubelet-check] The HTTP call equal to 'curl -sSL http://localhost:10248/healthz' failed with error: Get http://localhost:10248/healthz: dial tcp 127.0.0.1:10248: connect: connection refused.
Unfortunately, an error has occurred:
timed out waiting for the condition
This error is likely caused by:
- The kubelet is not running
- The kubelet is unhealthy due to a misconfiguration of the node in some way (required cgroups disabled)
- No internet connection is available so the kubelet cannot pull or find the following control plane images:
- k8s.gcr.io/kube-apiserver-amd64:v1.11.2
- k8s.gcr.io/kube-controller-manager-amd64:v1.11.2
- k8s.gcr.io/kube-scheduler-amd64:v1.11.2
- k8s.gcr.io/etcd-amd64:3.2.18
- You can check or miligate this in beforehand with "kubeadm config images pull" to make sure the images
are downloaded locally and cached.
If you are on a systemd-powered system, you can try to troubleshoot the error with the following commands:
- 'systemctl status kubelet'
- 'journalctl -xeu kubelet'
Additionally, a control plane component may have crashed or exited when started by the container runtime.
To troubleshoot, list all containers using your preferred container runtimes CLI, e.g. docker.
Here is one example how you may list all Kubernetes containers running in docker:
- 'docker ps -a | grep kube | grep -v pause'
Once you have found the failing container, you can inspect its logs with:
- 'docker logs CONTAINERID'
couldn't initialize a Kubernetes cluster
Docker version 17.03.2-ce, build f5ec1e2
我正在使用Ubuntu 16.04 LTS 64bit
REPOSITORY TAG IMAGE ID CREATED SIZE
k8s.gcr.io/kube-apiserver-amd64 v1.11.2 821507941e9c 3 weeks ago 187 MB
k8s.gcr.io/kube-controller-manager-amd64 v1.11.2 38521457c799 3 weeks ago 155 MB
k8s.gcr.io/kube-proxy-amd64 v1.11.2 46a3cd725628 3 weeks ago 97.8 MB
k8s.gcr.io/kube-scheduler-amd64 v1.11.2 37a1403e6c1a 3 weeks ago 56.8 MB
k8s.gcr.io/coredns 1.1.3 b3b94275d97c 3 months ago 45.6 MB
k8s.gcr.io/etcd-amd64 3.2.18 b8df3b177be2 4 months ago 219 MB
k8s.gcr.io/pause 3.1 da86e6ba6ca1 8 months ago 742 kB
ubuntu@ubuntu-HP-Pavilion-15-Notebook-PC:~$ docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS
journalctl -xeu kubelet
-- Subject: Unit kubelet.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit kubelet.service has finished shutting down.
Sep 01 10:40:05 ubuntu-HP-Pavilion-15-Notebook-PC systemd[1]: Started kubelet: T
-- Subject: Unit kubelet.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit kubelet.service has finished starting up.
--
-- The start-up result is done.
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC kubelet[9107]: Flag --cgroup-d
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC kubelet[9107]: Flag --cgroup-d
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC kubelet[9107]: I0901 10:40:06.
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC kubelet[9107]: I0901 10:40:06.
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC kubelet[9107]: I0901 10:40:06.
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC kubelet[9107]: I0901 10:40:06.
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC kubelet[9107]: F0901 10:40:06.
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC systemd[1]: kubelet.service: M
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC systemd[1]: kubelet.service: U
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC systemd[1]: kubelet.service: F
lines 788-810/810 (END)
-- Subject: Unit kubelet.service has finished shutting down
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit kubelet.service has finished shutting down.
Sep 01 10:40:05 ubuntu-HP-Pavilion-15-Notebook-PC systemd[1]: Started kubelet: The Kubernetes Node Agent.
-- Subject: Unit kubelet.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit kubelet.service has finished starting up.
--
-- The start-up result is done.
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC kubelet[9107]: Flag --cgroup-driver has been deprecated, This parameter should be set via the
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC kubelet[9107]: Flag --cgroup-driver has been deprecated, This parameter should be set via the
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC kubelet[9107]: I0901 10:40:06.117131 9107 server.go:408] Version: v1.11.2
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC kubelet[9107]: I0901 10:40:06.117406 9107 plugins.go:97] No cloud provider specified.
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC kubelet[9107]: I0901 10:40:06.121192 9107 certificate_store.go:131] Loading cert/key pair
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC kubelet[9107]: I0901 10:40:06.145720 9107 server.go:648] --cgroups-per-qos enabled, but --
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC kubelet[9107]: F0901 10:40:06.146074 9107 server.go:262] failed to run Kubelet: Running wi
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC systemd[1]: kubelet.service: Main process exited, code=exited, status=255/n/a
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC systemd[1]: kubelet.service: Unit entered failed state.
Sep 01 10:40:06 ubuntu-HP-Pavilion-15-Notebook-PC systemd[1]: kubelet.service: Failed with result 'exit-code'.
~
PORTS NAMES
最佳答案
该错误已由修复
sudo swapoff -a
sudo sed -i '/ swap / s/^/#/' /etc/fstab
关于kubernetes - kubeadm初始化显示kubelet未运行或运行状况良好,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/52119985/
我是 Spring 新手,这就是我想要做的事情: 我正在使用一个基于 Maven 的库,它有自己的 Spring 上下文和 Autowiring 字段。 它的bean配置文件是src/test/res
我在我的测试脚本中有以下列表初始化: newSequenceCore=["ls", "ns", "*", "cm", "*", "ov", "ov", "ov", "ov", "kd"] (代表要在控
这个问题在这里已经有了答案: 关闭 11 年前。 Possible Duplicate: Class construction with initial values 当我查看 http://en.
我得到了成员变量“objectCount”的限定错误。编译器还返回“ISO C++ 禁止非常量静态成员的类内初始化”。这是主类: #include #include "Tree.h" using n
我有如下所示的a.h class A { public: void doSomething()=0; }; 然后我有如下所示的b.h #include "a.h" class b: publi
我需要解析 Firebase DataSnapshot (一个 JSON 对象)转换成一个数据类,其属性包括 enum 和 list。所以我更喜欢通过传递 DataSnapshot 来手动解析它进入二
我使用 JQuery 一段时间了,我总是使用以下代码来初始化我的 javascript: $(document).ready( function() { // Initalisation logic
这里是 Objective-C 菜鸟。 为什么会这样: NSString *myString = [NSString alloc]; [myString initWithFormat:@"%f", s
我无法让核心数据支持的 NSArrayController 在我的代码中正常工作。下面是我的代码: pageArrayController = [[NSArrayController alloc] i
我对这一切都很陌生,并且无法将其安装到我的后端代码中。它去哪里?在我的页脚下面有我所有的 JS? 比如,这是什么意思: Popup initialization code should be exec
这可能是一个简单的问题,但是嘿,我是初学者。 所以我创建了一个程序来计算一些东西,它目前正在控制台中运行。我决定向其中添加一个用户界面,因此我使用 NetBeans IDE 中的内置功能创建了一个 J
我有 2 个 Controller ,TEST1Controller 和 TEST2Controller 在TEST2Controller中,我有一个initialize()函数设置属性值。 如果我尝
据我所知, dependentObservable 在声明时会进行计算。但如果某些值尚不存在怎么办? 例如: var viewModel ={}; var dependentObservable1 =
我正在阅读 POODR 这本书,它使用旧语法进行默认值初始化。我想用新语法实现相同的功能。 class Gear attr_reader :chainring, :cog, :wheel de
我按照 polymer 教程的说明进行操作: https://www.polymer-project.org/3.0/start/install-3-0 (我跳过了可选部分) 但是,在我执行命令“po
很抱歉问到一个非常新手的Kotlin问题,但是我正在努力理解与构造函数和初始化有关的一些东西。 我有这个类和构造函数: class TestCaseBuilder constructor(
假设我们有一个包含 30 列和 30 行的网格。 生命游戏规则简而言之: 一个小区有八个相邻小区 当一个细胞拥有三个存活的相邻细胞时,该细胞就会存活 如果一个细胞恰好有两个或三个活的相邻细胞,那么它就
我是 MQTT 和 Android 开放附件“AOA” 的新手。在阅读教程时,我意识到,在尝试写入 ByteArrayOutputStream 类型的变量之前,应该写入 0 或 0x00首先到该变量。
我有 2 个 Controller ,TEST1Controller 和 TEST2Controller 在TEST2Controller中,我有一个initialize()函数设置属性值。 如果我尝
我有一个inotify /内核问题。我正在使用“inotify” Python项目进行观察,但是,我的问题仍然是固有的关于inotify内核实现的核心。 Python inotify项目处理递归ino
我是一名优秀的程序员,十分优秀!