ncurses - 在 ncurses 中捕获 control+key 的正确方法

Question

在 ncurses 中捕获 control+key 的正确方法是什么？
当前我正在这样做定义控制，如下所示:

#define ctl(x) ((x) & 0x1f)

它工作正常，但问题是我不能同时捕捉 C-j 和 ENTER，这是因为:

   j = 106 = 1101010
0x1f = 31 = 0011111
1101010 & 0011111 = 0001010 = 10 = ENTER key..

所以..我该如何捕获它？
谢谢!

--
编辑:
如果我尝试下面的代码，
我无法正确捕捉回车键，即使在数字键盘中也是如此。 Enter 被捕获为 ctrl-j。

#include <stdio.h>
#include <ncurses.h>
#define ctrl(x) ((x) & 0x1f)

int main(void) {
    initscr();
    int c = getch();
    nonl();
    switch (c) {
        case KEY_ENTER:
            printw("key: %c", c);
            break;
        case ctrl('j'):
            printw("key: ctrl j");
            break;
    }
    getch();
    endwin();
    return;
}

新代码:

#include <stdio.h>
#include <ncurses.h>
#define ctrl(x)           ((x) & 0x1f)

int main(void) {
    initscr();
    int l = -1;
    int c = getch();
    cbreak();
    noecho();
    nonl();
    keypad(stdscr, TRUE);
    switch (c) {
        case KEY_ENTER:
            printw("key: %c", c);
            break;
        case ctrl('j'):
            printw("key: ctrl j");
            break;
    }
    printw("\nnow press a key to end");
    getch();
    endwin();
    return;
}

Answer 1

试试 nonl :

The nl and nonl routines control whether the underlying display device translates the return key into newline on input, and whether it translates newline into return and line-feed on output (in either case, the call addch('\n') does the equivalent of return and line feed on the virtual screen). Initially, these translations do occur. If you disable them using nonl, curses will be able to make better use of the line-feed capability, resulting in faster cursor motion. Also, curses will then be able to detect the return key.

进一步阅读: Notes section的 getch手册页:

Generally, KEY_ENTER denotes the character(s) sent by the Enter key on the numeric keypad:

• the terminal description lists the most useful keys,
• the Enter key on the regular keyboard is already handled by the standard ASCII characters for carriage-return and line-feed,

• depending on whether nl or nonl was called, pressing "Enter" on the regular keyboard may return either a carriage-return or line-feed, and finally

• "Enter or send" is the standard description for this key.

这解决了关于换行/回车翻译的问题。后续评论提醒您指出手册页在 Initialization 中提供了基本建议。部分:

To get character-at-a-time input without echoing (most interactive, screen oriented programs want this), the following sequence should be used:

     initscr(); cbreak(); noecho();

并且 OP 的示例程序没有使用 cbreak (或 raw )。 cbreak 的手册页说

Normally, the tty driver buffers typed characters until a newline or carriage return is typed. The cbreak routine disables line buffering and erase/kill character-processing (interrupt and flow control characters are unaffected), making characters typed by the user immediately available to the program. The nocbreak routine returns the terminal to normal (cooked) mode.

Initially the terminal may or may not be in cbreak mode, as the mode is inherited; therefore, a program should call cbreak or nocbreak explicitly. Most interactive programs using curses set the cbreak mode. Note that cbreak overrides raw. (See curs_getch(3x) for a discussion of how these routines interact with echo and noecho.)

此外，在 curs_getch 你可以读

If keypad is TRUE, and a function key is pressed, the token for that function key is returned instead of the raw characters:

• The predefined function keys are listed in <curses.h> as macros with values outside the range of 8-bit characters. Their names begin with KEY_.

也就是说，curses 只会返回 KEY_ENTER如果程序调用 keypad :

keypad(stdscr, TRUE);

为了便于讨论，下面是一个示例，它修复了截至 5 月 17 日您的示例程序存在的一些问题:

#include <stdio.h>
#include <ncurses.h>
#define ctrl(x)           ((x) & 0x1f)

int
main(void)
{
    int c;
    initscr();
    keypad(stdscr, TRUE);
    cbreak();
    noecho();
    nonl();
    c = getch();
    switch (c) {
    case KEY_ENTER:
        printw("\nkey_enter: %d", c);
        break;
    case ctrl('j'):
        printw("\nkey: ctrl j");
        break;
    default:
        printw("\nkeyname: %d = %s\n", c, keyname(c));
        break;
    }
    printw("\nnow press a key to end");
    getch();
    endwin();
    return 0;
}

也就是说，您必须调用 keypad之前 getch ，以及为 返回的值KEY_ENTER 不是字符(不能用 %c 打印)。

在 Linux 控制台上使用通常的终端描述运行，您只会看到数字键盘 Enter 的回车，因为该描述不使用应用程序模式。 Linux控制台确实支持应用模式，可以写相应的描述。作为快速检查(存在差异...)，您可以设置 TERM=vt100看 KEY_ENTER .