- html - 出于某种原因,IE8 对我的 Sass 文件中继承的 html5 CSS 不友好?
- JMeter 在响应断言中使用 span 标签的问题
- html - 在 :hover and :active? 上具有不同效果的 CSS 动画
- html - 相对于居中的 html 内容固定的 CSS 重复背景?
我试图在我的空 NTAG213 标签上设置密码,但是当我开始编写 PACK 和 PWD 时,我的应用程序崩溃了,没有抛出任何异常。我确实让我的应用程序足够远,可以编写有效的 NDEF 消息并读取它们,看来我也可以写入其他配置页面(2Ah 和 29h 用于配置密码保护)。但是,当我开始编写 PACK 时,我的应用程序崩溃了,但没有抛出我期望来自 MifareUltralight.transceive(byte[] data) 的 IOException。
这是我的 writeAndProtect 方法的源代码:
private void writeAndProtectTag(final Intent intent, final String message) {
// Run the entire process in its own thread as MifareUltralight.transceive(byte[] data);
// Should not be run in main thread according to <https://developer.android.com/reference/android/nfc/tech/MifareUltralight.html#transceive(byte[])>
(new Thread(new Runnable() {
// Password has to be 4 characters
// Password Acknowledge has to be 2 characters
byte[] pwd = "-_bA".getBytes();
byte[] pack = "cC".getBytes();
@Override
public void run() {
// Store tag object for use in MifareUltralight and Ndef
Tag tag = intent.getParcelableExtra(NfcAdapter.EXTRA_TAG);
MifareUltralight mifare = null;
int debugCounter = 0;
// Whole process is put into a big try-catch trying to catch the transceive's IOException
try {
mifare = MifareUltralight.get(tag);
mifare.connect();
while(!mifare.isConnected());
byte[] response;
// Authenticate with the tag first
// In case it's already been locked
try {
response = mifare.transceive(new byte[]{
(byte) 0x1B, // PWD_AUTH
pwd[0], pwd[1], pwd[2], pwd[3]
});
// Check if PACK is matching expected PACK
// This is a (not that) secure method to check if tag is genuine
if ((response != null) && (response.length >= 2)) {
byte[] packResponse = Arrays.copyOf(response, 2);
if (!(pack[0] == packResponse[0] && pack[1] == packResponse[1])) {
Toast.makeText(ctx, "Tag could not be authenticated:\n" + packResponse.toString() + "≠" + pack.toString(), Toast.LENGTH_LONG).show();
}
}
}catch(IOException e){
e.printStackTrace();
}
// Get Page 2Ah
response = mifare.transceive(new byte[] {
(byte) 0x30, // READ
(byte) 0x2A // page address
});
// configure tag as write-protected with unlimited authentication tries
if ((response != null) && (response.length >= 16)) { // read always returns 4 pages
boolean prot = false; // false = PWD_AUTH for write only, true = PWD_AUTH for read and write
int authlim = 0; // 0 = unlimited tries
mifare.transceive(new byte[] {
(byte) 0xA2, // WRITE
(byte) 0x2A, // page address
(byte) ((response[0] & 0x078) | (prot ? 0x080 : 0x000) | (authlim & 0x007)), // set ACCESS byte according to our settings
0, 0, 0 // fill rest as zeros as stated in datasheet (RFUI must be set as 0b)
});
}
// Get page 29h
response = mifare.transceive(new byte[] {
(byte) 0x30, // READ
(byte) 0x29 // page address
});
// Configure tag to protect entire storage (page 0 and above)
if ((response != null) && (response.length >= 16)) { // read always returns 4 pages
int auth0 = 0; // first page to be protected
mifare.transceive(new byte[] {
(byte) 0xA2, // WRITE
(byte) 0x29, // page address
response[0], 0, response[2], // Keep old mirror values and write 0 in RFUI byte as stated in datasheet
(byte) (auth0 & 0x0ff)
});
}
// Send PACK and PWD
// set PACK:
mifare.transceive(new byte[] {
(byte)0xA2,
(byte)0x2C,
pack[0], pack[1], 0, 0 // Write PACK into first 2 Bytes and 0 in RFUI bytes
});
// set PWD:
mifare.transceive(new byte[] {
(byte)0xA2,
(byte)0x2B,
pwd[0], pwd[1], pwd[2], pwd[3] // Write all 4 PWD bytes into Page 43
});
} catch (IOException e) {
//Trying to catch any exception that may be thrown
e.printStackTrace();
} catch (Exception e) {
//Trying to catch any exception that may be thrown
e.printStackTrace();
}
try {
mifare.close();
} catch (IOException e) {
e.printStackTrace();
}
// Generate NdefMessage to be written onto the tag
NdefMessage msg = null;
try {
NdefRecord r1 = NdefRecord.createMime("text/plain", message.getBytes("UTF-8"));
NdefRecord r2 = NdefRecord.createApplicationRecord("com.example.myname.myapplication");
msg = new NdefMessage(r1, r2);
} catch (UnsupportedEncodingException e) {
e.printStackTrace();
}
// Generate Ndef object from tag object
Ndef ndef = Ndef.get(tag);
// Connect NDEF, write message and close connection
try {
ndef.connect();
ndef.writeNdefMessage(msg);
ndef.close();
} catch (IOException e) {
e.printStackTrace();
} catch (FormatException e) {
e.printStackTrace();
} catch (Exception e) {
//Trying to catch any exception that may be thrown
e.printStackTrace();
}
runOnUiThread(new Runnable() {
@Override
public void run() {
btn.setImageResource(R.drawable.arrow_red);
tv.setText("");
}
});
curAction = "handle";
}
})).start();
}
编辑:我不知道昨天 Android Studio 是否出了问题,或者您的解决方案是否真的改变了这种情况,但我更新了代码,现在出现以下异常:
E/AndroidRuntime: FATAL EXCEPTION: Thread-4
Process: com.example.alex.nfcapppce, PID: 25918
java.lang.IllegalStateException: Close other technology first!
at android.nfc.Tag.setConnectedTechnology(Tag.java:458)
at android.nfc.tech.BasicTagTechnology.connect(BasicTagTechnology.java:78)
at android.nfc.tech.Ndef.connect(Ndef.java)
at com.example.alex.nfcapppce.MainActivity$2.run(MainActivity.java:194) //The line saying ndef.connect()
at java.lang.Thread.run(Thread.java:761)
我不太明白为什么会这样,因为首先我连接了 mifare,等待它连接,进行收发,关闭我的 mifare,然后调用 ndef.connect() block 。这是否意味着在我的收发 block 中的某处出现异常,因此我没有正确关闭 mifare 并且无法打开 ndef?那会很奇怪,因为即使我只用 Exception 换掉了 IOException,我也没有得到异常,所以我捕获了每个异常,不管确切的类型是什么。
编辑 2:我现在明白为什么应用程序会在这个异常中结束。代码确实有效,我的标签现在受密码保护,当我再次尝试使用相同的标签时,我不会先进行身份验证,因此收发失败,导致 try-catch block 中断,该 block 也包含关闭功能。我通过使 MifareUltralight 对象在整个线程中可用并在运行 ndef.connect() 部分之前关闭它来解决这个问题。
现在我(希望如此)的最后一个问题是:我可以使用 Ndef 类进行身份验证吗?我的 Ndef 对象似乎没有身份验证方法,因此我将不得不再次使用 MifareUltralight。但是当我关闭 MifareUltralight 连接以打开 Ndef 连接时,身份验证不会丢失吗?或者我唯一的可能性是使用密码保护标签写 Ndef 消息字符串,将它们分成 4 字节的页面并使用 MifareUltralight.writepage(byte[] addr, byte[] data) 一个接一个地写入?当我使用上面的更新时,我从 ndef.writeNdefMessage() 得到一个 IOException,我想这意味着关闭 mifare 连接也未授权我。
提前致谢。
最佳答案
使用 MifareUltralight 技术时,您永远不会连接到标签。因此,调用 mifare.transceive()
将导致异常。您的应用程序崩溃是因为此异常可能不是 IOException
的实例(您会在代码中捕获到)。
因此,一定要打电话
mifare.connect();
在您收发任何命令之前,还要确保在此之后再次关闭实例:
try {
mifare.close();
} catch (Exception ignored) {}
关于java - 使用 MifareUltralight.transceive 在 Android 中设置 NTAG213 密码崩溃,没有抛出异常,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/45477331/
我有一段代码看起来像这样: void update_clock(uint8_t *time_array) { time_t time = *((time_t *) &time_array[0]
应用程序崩溃了 :( 请帮助我.. 在这方面失败了。我找不到错误?该应用程序可以连接到 iTunesConnect 但它会出错。 谁能根据下面的崩溃报告判断问题出在哪里? share_with_app
小二是新来的实习生,作为技术 leader,我给他安排了一个非常简单的练手任务,把前端 markdown 编辑器里上传的图片保存到服务器端,结果他真的就把图片直接保存到了服务器上,这下可把我气坏了,就
我正在创建一个函数,它将目录路径作为参数传递,或者如果它留空,则提示用户输入。 我已经设置了我的 PATH_MAX=100 和 if 语句来检查 if ((strlen(folder path) +
我已将“arial.ttf”文件(从我的/Windows/Fonts 文件夹中获取)加载到内存中,但是将其传递到 FT_New_Memory_Face 时会崩溃(在 FT_Open_Face 中的某处
我正在尝试在我的计算机上的两个控制台之间进行 rtsp 流。 在控制台 1 上,我有: ffmpeg -rtbufsize 100M -re -f dshow -s 320x240 -i video=
我正在尝试使用 scio_beast在一个项目中。我知道它还没有完成,但这并不重要。我已经设法让它工作得很好。 我现在正在尝试连接到 CloudFlare 后面的服务器,我知道我需要 SNI 才能工作
我有一个带有关联宏的下拉列表,如下所示: Sub Drop() If Range("Hidden1!A1") = "1" Then Sheets("Sheet1").Se
我对 bash 很陌生。我要做的就是运行这个nvvp -vm /usr/lib64/jvm/jre-1.8.0/bin/java无需记住最后的路径。我认为 instafix 就是这样做...... n
我在 Windows 上使用 XAMPP 已经两年左右了,它运行完美,没有崩溃没有问题。 (直到四个月前。) 大约四个月前,我们将服务器/系统升级到了更快的规范。 这是旧规范的内容 - Windows
我面临着一个非常烦人的 android 崩溃,它发生在大约 1% 的 PRODUCTION session 中,应用程序始终在后台运行。 Fatal Exception: android.app.Re
尝试使用下面的函数: public void createObjectType() { try { mCloudDB.createObjectType(ObjectTypeIn
由于我正在进行的一个项目,我在 CF11 管理员中弄乱了类路径,我设法使服务器崩溃,以至于我唯一得到的是一个漂亮的蓝屏和 500 错误.我已经检查了日志,我会把我能做的贴在帖子的底部,但我希望有人会启
关闭。这个问题不满足Stack Overflow guidelines .它目前不接受答案。 想改善这个问题吗?更新问题,使其成为 on-topic对于堆栈溢出。 10 个月前关闭。 Improve
我最近从 xcode 3.x 更新到 4.2,当我在 4.2 中运行应用程序时,我遇到了核心数据问题。我还更新到了 iOS 5,所以问题可能就在那里,我不太确定。 这些应用程序在 3.x 中运行良好,
我是一个相对较新的 iPhone 应用程序开发人员,所以我的知识有点粗略,所以如果这是一个微不足道的问题,请原谅我。 我有一个导航应用程序,它通过在navigationController对象上调用p
if ([MFMailComposeViewController canSendMail]) { MFMailComposeViewController *mailViewController
你能帮我吗? 我正在设置 UILocalNotification,当我尝试设置其 userInfo 字典时,它崩溃了。 fetchedObjects 包含 88 个对象。 这是代码: NSDi
为什么我的代码中突然出现 NSFastEnumeration Mutation Handler 崩溃。我很茫然为什么会突然出现这个崩溃以及如何解决它。 最佳答案 崩溃错误: **** 由于未捕获的异常
当我从表中删除行时,我的应用程序崩溃了。这是我检测到错误和堆栈跟踪的来源。谢谢! //delete row from database - (void)tableView:(UITableView *
我是一名优秀的程序员,十分优秀!