gpt4 book ai didi

ios - ansible - 思科 IOS 和 "reload"命令

转载 作者:行者123 更新时间:2023-11-29 11:53:36 25 4
gpt4 key购买 nike

我想向 Cisco IOS 发送命令“reload in”,但需要确认该特定命令,如下所示:

#reload in 30
Reload scheduled in 30 minutes by admin on vty0 (192.168.253.15)
Proceed with reload? [confirm]

好像 ios_command 模块不处理这种情况。我的配置:

 tasks:
- name: do reload in case of "catting off"
ios_command:
commands: reload in 30
commands: y
provider: "{{ cli }}"

以及剧本的回应:

TASK [do reload in case of "catting off"] **************************************
task path: /etc/ansible/test1.yml:14
<192.168.0.33> ESTABLISH LOCAL CONNECTION FOR USER: root
<192.168.0.33> EXEC /bin/sh -c '( umask 77 && mkdir -p "` echo $HOME/.ansible/tmp/ansible-tmp-1476454008.17-103724241654271 `" && echo ansible-tmp-1476454008.17-103724241654271="` echo $HOME/.ansible/tmp/ansible-tmp-1476454008.17-103724241654271 `" ) && sleep 0'
<192.168.0.33> PUT /tmp/tmpAJiZR2 TO /root/.ansible/tmp/ansible-tmp-1476454008.17-103724241654271/ios_command
<192.168.0.33> EXEC /bin/sh -c 'LANG=pl_PL.UTF-8 LC_ALL=pl_PL.UTF-8 LC_MESSAGES=pl_PL.UTF-8 /usr/bin/python /root/.ansible/tmp/ansible-tmp-1476454008.17-103724241654271/ios_command; rm -rf "/root/.ansible/tmp/ansible-tmp-1476454008.17-103724241654271/" > /dev/null 2>&1 && sleep 0'
fatal: [192.168.0.33]: FAILED! => {"changed": false, "commands": ["y"], "failed": true, "invocation": {"module_args": {"auth_pass": null, "authorize": false, "commands": ["y"], "host": "192.168.0.33", "interval": 1, "password": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER", "port": 22, "provider": "{'username': 'admin', 'host': '192.168.0.33', 'password': '********'}", "retries": 10, "ssh_keyfile": null, "timeout": 10, "username": "admin", "waitfor": null}, "module_name": "ios_command"}, "msg": "matched error in response: y\r\n ^\r\n% Invalid input detected at '^' marker.\r\n\r\nsw7.test.lab#"}

我该如何处理?


更新:

如果我尝试像这样在 YAML 文件中使用 expect 模块:

 name: some tests
hosts: sw-test
gather_facts: False
# connection: local

tasks:
- name: do reload in case of "catting off"
expect:
command: reload in 30
responses:
'Reload scheduled in 30 minutes by admin on vty0 (192.168.253.20)\nProceed with reload? \[confirm\]' : y
echo: yes

但是连接有问题:

oot@Kali:/etc/ansible# ansible-playbook test3 -u admin -k -vvvv 
Using /etc/ansible/ansible.cfg as config file
SSH password:
Loaded callback default of type stdout, v2.0

PLAYBOOK: test3 ****************************************************************
1 plays in test3

PLAY [some tests] **************************************************************

TASK [do reload in case of "catting off"] **************************************
task path: /etc/ansible/test3:9
<192.168.0.33> ESTABLISH SSH CONNECTION FOR USER: admin
<192.168.0.33> SSH: EXEC sshpass -d12 ssh -C -vvv -o ControlMaster=auto -o ControlPersist=60s -o StrictHostKeyChecking=no -o User=admin -o ConnectTimeout=10 -o ControlPath=/root/.ansible/cp/ansible-ssh-%h-%p-%r 192.168.0.33 '/bin/sh -c '"'"'( umask 77 && mkdir -p "` echo $HOME/.ansible/tmp/ansible-tmp-1476882070.37-92402455055985 `" && echo ansible-tmp-1476882070.37-92402455055985="` echo $HOME/.ansible/tmp/ansible-tmp-1476882070.37-92402455055985 `" ) && sleep 0'"'"''
<192.168.0.33> PUT /tmp/tmp30wGsF TO "` echo $HOME/.ansible/tmp/ansible-tmp-1476882070.37-92402455055985 `" ) && sleep 0'"/expect
<192.168.0.33> SSH: EXEC sshpass -d12 sftp -o BatchMode=no -b - -C -vvv -o ControlMaster=auto -o ControlPersist=60s -o StrictHostKeyChecking=no -o User=admin -o ConnectTimeout=10 -o ControlPath=/root/.ansible/cp/ansible-ssh-%h-%p-%r '[192.168.0.33]'
fatal: [192.168.0.33]: UNREACHABLE! => {"changed": false, "msg": "SSH Error: data could not be sent to the remote host. Make sure this host can be reached over ssh", "unreachable": true}
to retry, use: --limit @/etc/ansible/test3.retry

PLAY RECAP *********************************************************************
192.168.0.33 : ok=0 changed=0 unreachable=1 failed=0


root@Kali:/etc/ansible# ansible-playbook test3 -u admin -k -vvvv -c ssh
Using /etc/ansible/ansible.cfg as config file
SSH password:
Loaded callback default of type stdout, v2.0

PLAYBOOK: test3 ****************************************************************
1 plays in test3

PLAY [some tests] **************************************************************

TASK [do reload in case of "catting off"] **************************************
task path: /etc/ansible/test3:9
<192.168.0.33> ESTABLISH SSH CONNECTION FOR USER: admin
<192.168.0.33> SSH: EXEC sshpass -d12 ssh -C -vvv -o ControlMaster=auto -o ControlPersist=60s -o StrictHostKeyChecking=no -o User=admin -o ConnectTimeout=10 -o ControlPath=/root/.ansible/cp/ansible-ssh-%h-%p-%r 192.168.0.33 '/bin/sh -c '"'"'( umask 77 && mkdir -p "` echo $HOME/.ansible/tmp/ansible-tmp-1476882145.78-139203779538157 `" && echo ansible-tmp-1476882145.78-139203779538157="` echo $HOME/.ansible/tmp/ansible-tmp-1476882145.78-139203779538157 `" ) && sleep 0'"'"''
<192.168.0.33> PUT /tmp/tmpY5qqyW TO "` echo $HOME/.ansible/tmp/ansible-tmp-1476882145.78-139203779538157 `" ) && sleep 0'"/expect
<192.168.0.33> SSH: EXEC sshpass -d12 sftp -o BatchMode=no -b - -C -vvv -o

ControlMaster=auto -o ControlPersist=60s -o StrictHostKeyChecking=no -o User=admin -o ConnectTimeout=10 -o ControlPath=/root/.ansible/cp/ansible-ssh-%h-%p-%r '[192.168.0.33]'
fatal: [192.168.0.33]: UNREACHABLE! => {"changed": false, "msg": "SSH Error: data could not be sent to the remote host. Make sure this host can be reached over ssh", "unreachable": true}
to retry, use: --limit @/etc/ansible/test3.retry

PLAY RECAP *********************************************************************
192.168.0.33 : ok=0 changed=0 unreachable=1 failed=0

root@Kali:/etc/ansible# ansible-playbook test3 -u admin -k -vvvv -c local
Using /etc/ansible/ansible.cfg as config file
SSH password:
Loaded callback default of type stdout, v2.0

PLAYBOOK: test3 ****************************************************************
1 plays in test3

PLAY [some tests] **************************************************************

TASK [do reload in case of "catting off"] **************************************
task path: /etc/ansible/test3:9
<192.168.0.33> ESTABLISH LOCAL CONNECTION FOR USER: root
<192.168.0.33> EXEC /bin/sh -c '( umask 77 && mkdir -p "` echo $HOME/.ansible/tmp/ansible-tmp-1476882426.62-172601217553809 `" && echo ansible-tmp-1476882426.62-172601217553809="` echo $HOME/.ansible/tmp/ansible-tmp-1476882426.62-172601217553809 `" ) && sleep 0'
<192.168.0.33> PUT /tmp/tmpdq1pYy TO /root/.ansible/tmp/ansible-tmp-1476882426.62-172601217553809/expect
<192.168.0.33> EXEC /bin/sh -c 'chmod u+x /root/.ansible/tmp/ansible-tmp-1476882426.62-172601217553809/ /root/.ansible/tmp/ansible-tmp-1476882426.62-172601217553809/expect && sleep 0'
<192.168.0.33> EXEC /bin/sh -c 'LANG=pl_PL.UTF-8 LC_ALL=pl_PL.UTF-8 LC_MESSAGES=pl_PL.UTF-8 /usr/bin/python /root/.ansible/tmp/ansible-tmp-1476882426.62-172601217553809/expect; rm -rf "/root/.ansible/tmp/ansible-tmp-1476882426.62-172601217553809/" > /dev/null 2>&1 && sleep 0'
fatal: [192.168.0.33]: FAILED! => {"changed": false, "failed": true, "invocation": {"module_args": {"chdir": null, "command": "reload in 30", "creates": null, "echo": true, "removes": null, "responses": {"Reload scheduled in 30 minutes by admin on vty0 (192.168.253.20)\\nProceed with reload? \\[confirm\\]": "y"}, "timeout": 30}, "module_name": "expect"}, "msg": "The command was not found or was not executable: reload."}

NO MORE HOSTS LEFT *************************************************************
to retry, use: --limit @/etc/ansible/test3.retry

PLAY RECAP *********************************************************************
192.168.0.33 : ok=0 changed=0 unreachable=0 failed=1

更新

我已经安装了 ansible 2.3 并尝试如下:

  tasks:
- name: do reload in case of "catting off"
ios_command:
commands:
- reload in 30
- y
wait_for:
- result[0] contains "Proceed with reload"
provider: "{{ cli }}"

但是,我仍然得到一个错误。我认为这是因为 ios 模块总是等待提示作为响应。并且在按“y”后重新加载命令的额外确认没有“Enter”,所以这可能是另一个问题。

  $ sudo  ansible-playbook test1.yml -vvvv
Using /etc/ansible/ansible.cfg as config file
Loading callback plugin default of type stdout, v2.0 from /usr/local/lib/python2.7/dist-packages/ansible/plugins/callback/__init__.pyc

PLAYBOOK: test1.yml ************************************************************
1 plays in test1.yml

PLAY [testowe dzialania] *******************************************************

TASK [do reload in case of "catting off"] **************************************
task path: /home/user1/test1.yml:13
Using module file /usr/local/lib/python2.7/dist-packages/ansible/modules/core/network/ios/ios_command.py
<192.168.0.33> ESTABLISH LOCAL CONNECTION FOR USER: root
<192.168.0.33> EXEC /bin/sh -c '( umask 77 && mkdir -p "` echo $HOME/.ansible/tmp/ansible-tmp-1477557527.56-157304653717324 `" && echo ansible-tmp-1477557527.56-157304653717324="` echo $HOME/.ansible/tmp/ansible-tmp-1477557527.56-157304653717324 `" ) && sleep 0'
<192.168.0.33> PUT /tmp/tmphf8EWO TO /home/mszczesniak/.ansible/tmp/ansible-tmp-1477557527.56-157304653717324/ios_command.py
<192.168.0.33> EXEC /bin/sh -c 'chmod u+x /home/mszczesniak/.ansible/tmp/ansible-tmp-1477557527.56-157304653717324/ /home/mszczesniak/.ansible/tmp/ansible-tmp-1477557527.56-157304653717324/ios_command.py && sleep 0'
<192.168.0.33> EXEC /bin/sh -c '/usr/bin/python /home/mszczesniak/.ansible/tmp/ansible-tmp-1477557527.56-157304653717324/ios_command.py; rm -rf "/home/user1/.ansible/tmp/ansible-tmp-1477557527.56-157304653717324/" > /dev/null 2>&1 && sleep 0'
fatal: [192.168.0.33]: FAILED! => {
"changed": false,
"failed": true,
"invocation": {
"module_args": {
"auth_pass": null,
"authorize": false,
"commands": [
"reload in 30",
"y"
],
"host": "192.168.0.33",
"interval": 1,
"match": "all",
"password": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER",
"port": null,
"provider": {
"host": "192.168.0.33",
"password": "VALUE_SPECIFIED_IN_NO_LOG_PARAMETER",
"username": "admin"
},
"retries": 10,
"ssh_keyfile": null,
"timeout": 10,
"transport": null,
"use_ssl": true,
"username": "admin",
"validate_certs": true,
"wait_for": [
"result[0] contains \"Proceed with reload\""
]
},
"module_name": "ios_command"
},
"msg": "timeout trying to send command: reload in 30\r"
}
to retry, use: --limit @/home/user1/test1.retry

PLAY RECAP *********************************************************************
192.168.0.33 : ok=0 changed=0 unreachable=0 failed=1

谁能知道如何在 ansible 或 maby 中解决该问题,唯一的方法是使用纯 python 脚本或编写自己的 ansible 模块?

最佳答案

您可以使用:

- name: reload device
ios_command:
commands:
- "reload in 1\ny"
provider: "{{ cli }}"

这将在 1 分钟内重新加载设备并接受重新加载提示。它适用于 ansible,因为 ios 的默认提示将返回(1 分钟内触发重新加载)。

问候,西蒙

关于ios - ansible - 思科 IOS 和 "reload"命令,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/40045342/

25 4 0
Copyright 2021 - 2024 cfsdn All Rights Reserved 蜀ICP备2022000587号
广告合作:1813099741@qq.com 6ren.com