ios - 如何在 os x 上配置 NAT-pmp 以支持 utun 设备？

Question

我使用 SimepleTunnel 项目，iPhone 应用程序 PacketTunel 扩展与 tunnel_server 一起工作，但是 tunnel_server 将数据包写入 kerel，如何配置 pf 到 NAT 流量并且数据包可以路由到 Internet？

Mac OS X 系统 Internetshare 使用/usr/libexec/natpmpd ，此应用程序仅支持以太网设备，不支持 ip 隧道设备

pf.conf

vpn_net = "192.168.3.0/24"  
ext_if = "en0"  
nat on en0  from $vpn_net to any ->  (en0)  

检查pf状态

rMBP:etc root# pfctl -sa  
No ALTQ support in kernel  
ALTQ related functions disabled  
TRANSLATION RULES:  
nat on en0 inet from 192.168.3.0/24 to any -> (en0) round-robin  

我用tcpdump检查写入状态

tcpdump -i utun0 并找到 192.168.3.0/16 到我的 dnsserver 192.168.0.24，但没有 dnserver 重播到 192.168.3.0/16

14:02:46.467038 IP 192.168.3.3.57257 > 192.168.0.245.domain: 38998+ A? guzzoni.apple.com. (35)  
14:02:46.467877 IP 192.168.3.3.49218 > 192.168.0.245.domain: 59621+ A? www.apple.com. (31)  
14:02:53.068894 IP 192.168.3.3.60834 > 192.168.0.245.domain: 52069+ A? apple.com. (27)  
14:02:53.069427 IP 192.168.3.3.57257 > 192.168.0.245.domain: 38998+ A? guzzoni.apple.com. (35)  
14:02:53.070072 IP 192.168.3.3.49218 > 192.168.0.245.domain: 59621+ A? www.apple.com. (31)  
14:03:05.456122 IP 192.168.3.3.60834 > 192.168.0.245.domain: 52069+ A? apple.com. (27)  
14:03:05.456653 IP 192.168.3.3.57257 > 192.168.0.245.domain: 38998+ A? guzzoni.apple.com. (35)  
14:03:05.457140 IP 192.168.3.3.49218 > 192.168.0.245.domain: 59621+ A? www.apple.com. (31)  

如何将 pf 让 utun 数据包配置为 NAT 流量？

Answer 1

nat-anchor "simpleTunnel" 
load anchor "simpleTunnel" from "/etc/pf.anchors/simpleTunnel"
add upper lines to /etc/pf.conf

编辑pf.anchors/simpleTunnel，添加

nat on en0 from 10.10.0.0/16 to any -> en0 

然后

sudo sysctl net.inet.ip.forwarding=1  
sudo sysctl net.inet.ip.fw.enable=1  
sudo pfctl -evf /etc/pf.conf  

引用 develop forum