c++ - 当它用超声波传感器(C++)检测到物体时停止机器人车

Question

最近我一直在尝试让我的机器人在检测到前方有障碍物时停下来。接下来的情况是:当我检测到一个物体时，汽车停下来没关系，但是当物体消失时，汽车不会继续移动到最终目的地。而不是这样做，汽车应该从 A 点行驶到 B 点 10 秒(10 秒只是一个例子，每次运动的时间都不同)，当它检测到一个物体时，它应该停下来等到物体消失，之后它必须继续到它的最终目的地(B 点)。

我有一个想法，就是计算机器人不动的时间，然后加上到达终点所需的时间。但我正在努力解决这个问题。

代码如下:

int measureDistance()
{
    if (wiringPiSetup() == -1)
        cout << "Initialization problem - measureDistance() " << endl;

    Sonar sonar;
    sonar.init(trigger, echo);

    int distance = 0;

    distance = sonar.distance(30000);
    sleep_for(nanoseconds(10));

    return distance;
}

bool checkForObstacles() 
{
    wiringPiSetup();

    // Controlling the motors from here
    softPwmCreate(0, 0, 255);
    softPwmCreate(4, 0, 255);

    constexpr int MIN_DISTANCE = 20;

    int distance = measureDistance();
    cout << "Distance: " << distance << endl;

    if (distance >= MIN_DISTANCE)
        return false;

    softPwmWrite(0, LOW);
    softPwmWrite(4, LOW);

    while(distance < MIN_DISTANCE) 
    {
        delay(10); // re-measure after 10ms. Adjust to what you prefer
        distance = measureDistance();
        cout << "Measuring: " << distance << "cm" << endl;
    }


    return false;
}

void move(int t)
{
        // Pins where the motors are connected
    int ena = 0;
    int in1 = 2;
    int in2 = 3;

    int enb = 4;
    int in3 = 5;
    int in4 = 6;
    // Pins setup
    wiringPiSetup ();

    softPwmCreate(ena, 0, 255);
    pinMode(in1, OUTPUT);
    pinMode(in2, OUTPUT);

    softPwmCreate(enb, 0, 255);
    pinMode(in3, OUTPUT);
    pinMode(in4, OUTPUT);

    // Control
    softPwmWrite(ena, 50);
    digitalWrite(in1, 1);
    digitalWrite(in2, 0);

    softPwmWrite(enb, 50);
    digitalWrite(in3, 1);
    digitalWrite(in4, 0);

    cout << "TIME: " << t << endl;
    auto start = chrono::high_resolution_clock::now();
    while(true) 
    {
        auto now = chrono::high_resolution_clock::now();
        auto elapsed = chrono::duration_cast<chrono::milliseconds>(now-start).count();

        cout << "ELAPSED: " << elapsed << endl;

        int remaining = t - (int) elapsed;

        cout << "REMAINING: " << remaining << "ms" << endl;
        if (remaining < 0)
            break;

        if (checkForObstacles())
        {
            continue;
        }   

        delay(min(remaining, 25)); // replace 25 with how often you want to check the distance
    }

    softPwmWrite(ena, LOW);
    softPwmWrite(enb, LOW);
    delay(200);
}

要恢复:当我在它前面放置障碍物时，汽车会停止，但当我移除障碍物时，程序会结束 - 之后汽车不会移动。 这不应该发生。

P.S:一切都在 Raspberry Pi 上运行。

Answer 1

这是一种伪代码，因为我不知道你的机器人和 wiringPi 是如何工作的，但我希望这段代码流能帮助你走上正轨:measureDistance 似乎没什么用，所以我删除了它(并且由于某种原因它每次都调用初始化)。在你的主体中，你应该设置所有的 pin 东西和声纳，然后在无限循环中你睡一会儿，检查障碍物，如果没有，你就移动，否则跳过移动部分。

int main()
{
    // only initialize everything once, in your main
    if (wiringPiSetup() == -1)
        return -1;

    Sonar sonar;
    sonar.init(trigger, echo); // declare these somewhere first, I don't know the values

    while(1){
        sleep_for(nanoseconds(10)); // or delay(200) or whatever
        // if there are obstacles skip the move() part and go back to sleeping
        // or delay again, and try again
        if (checkForObstacles(sonar))
            continue;
        // No obstacle = move
        move();
    }
}

// this is only responsible for checking obstacles, no pin writing and moving happening
bool checkForObstacles(Sonar sonar) // pass in a reference to sonar
{
    constexpr int MIN_DISTANCE = 20;

    int distance = sonar.distance(30000);
    cout << "Distance: " << distance << endl;

    if (distance >= MIN_DISTANCE)
        return false;

    return true;
}

void move() {
    /*
    *  only move logic goes here
    * like the digitalWrites
    */
}