- android - 多次调用 OnPrimaryClipChangedListener
- android - 无法更新 RecyclerView 中的 TextView 字段
- android.database.CursorIndexOutOfBoundsException : Index 0 requested, 光标大小为 0
- android - 使用 AppCompat 时,我们是否需要明确指定其 UI 组件(Spinner、EditText)颜色
我已经使用 mknod 为 block 驱动程序生成了设备文件。现在如何通过我生成的设备文件读取/写入/传输任何请求或文件?
最佳答案
浏览这个示例 block 驱动程序
sbd.c
/*
* A sample, extra-simple block driver. Updated for kernel 2.6.31.
*
* (C) 2003 Eklektix, Inc.
* (C) 2010 Pat Patterson <pat at superpat dot com>
* Redistributable under the terms of the GNU GPL.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/kernel.h> /* printk() */
#include <linux/fs.h> /* everything... */
#include <linux/errno.h> /* error codes */
#include <linux/types.h> /* size_t */
#include <linux/vmalloc.h>
#include <linux/genhd.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
MODULE_LICENSE("Dual BSD/GPL");
static char *Version = "1.4";
static int major_num = 0;
module_param(major_num, int, 0);
static int logical_block_size = 512;
module_param(logical_block_size, int, 0);
static int nsectors = 1024; /* How big the drive is */
module_param(nsectors, int, 0);
/*
* We can tweak our hardware sector size, but the kernel talks to us
* in terms of small sectors, always.
*/
#define KERNEL_SECTOR_SIZE 512
/*
* Our request queue.
*/
static struct request_queue *Queue;
/*
* The internal representation of our device.
*/
static struct sbd_device {
unsigned long size;
spinlock_t lock;
u8 *data;
struct gendisk *gd;
} Device;
/*
* Handle an I/O request.
*/
static void sbd_transfer(struct sbd_device *dev, sector_t sector,
unsigned long nsect, char *buffer, int write) {
unsigned long offset = sector * logical_block_size;
unsigned long nbytes = nsect * logical_block_size;
if ((offset + nbytes) > dev->size) {
printk (KERN_NOTICE "sbd: Beyond-end write (%ld %ld)\n", offset, nbytes);
return;
}
if (write)
memcpy(dev->data + offset, buffer, nbytes);
else
memcpy(buffer, dev->data + offset, nbytes);
}
static void sbd_request(struct request_queue *q) {
struct request *req;
req = blk_fetch_request(q);
while (req != NULL) {
// blk_fs_request() was removed in 2.6.36 - many thanks to
// Christian Paro for the heads up and fix...
//if (!blk_fs_request(req)) {
if (req == NULL || (req->cmd_type != REQ_TYPE_FS)) {
printk (KERN_NOTICE "Skip non-CMD request\n");
__blk_end_request_all(req, -EIO);
continue;
}
sbd_transfer(&Device, blk_rq_pos(req), blk_rq_cur_sectors(req),
req->buffer, rq_data_dir(req));
if ( ! __blk_end_request_cur(req, 0) ) {
req = blk_fetch_request(q);
}
}
}
/*
* The HDIO_GETGEO ioctl is handled in blkdev_ioctl(), which
* calls this. We need to implement getgeo, since we can't
* use tools such as fdisk to partition the drive otherwise.
*/
int sbd_getgeo(struct block_device * block_device, struct hd_geometry * geo) {
long size;
/* We have no real geometry, of course, so make something up. */
size = Device.size * (logical_block_size / KERNEL_SECTOR_SIZE);
geo->cylinders = (size & ~0x3f) >> 6;
geo->heads = 4;
geo->sectors = 16;
geo->start = 0;
return 0;
}
/*
* The device operations structure.
*/
static struct block_device_operations sbd_ops = {
.owner = THIS_MODULE,
.getgeo = sbd_getgeo
};
static int __init sbd_init(void) {
/*
* Set up our internal device.
*/
Device.size = nsectors * logical_block_size;
spin_lock_init(&Device.lock);
Device.data = vmalloc(Device.size);
if (Device.data == NULL)
return -ENOMEM;
/*
* Get a request queue.
*/
Queue = blk_init_queue(sbd_request, &Device.lock);
if (Queue == NULL)
goto out;
blk_queue_logical_block_size(Queue, logical_block_size);
/*
* Get registered.
*/
major_num = register_blkdev(major_num, "sbd");
if (major_num < 0) {
printk(KERN_WARNING "sbd: unable to get major number\n");
goto out;
}
/*
* And the gendisk structure.
*/
Device.gd = alloc_disk(16);
if (!Device.gd)
goto out_unregister;
Device.gd->major = major_num;
Device.gd->first_minor = 0;
Device.gd->fops = &sbd_ops;
Device.gd->private_data = &Device;
strcpy(Device.gd->disk_name, "sbd0");
set_capacity(Device.gd, nsectors);
Device.gd->queue = Queue;
add_disk(Device.gd);
return 0;
out_unregister:
unregister_blkdev(major_num, "sbd");
out:
vfree(Device.data);
return -ENOMEM;
}
static void __exit sbd_exit(void)
{
del_gendisk(Device.gd);
put_disk(Device.gd);
unregister_blkdev(major_num, "sbd");
blk_cleanup_queue(Queue);
vfree(Device.data);
}
module_init(sbd_init);
module_exit(sbd_exit);
对于伪 block 设备另请参阅this
引用 http://free-electrons.com/doc/block_drivers.pdf
关于linux - 伪 block 驱动程序 : I have generated the device file for block driver using mknod,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/34429417/
我想知道是否可以访问放在 tomcat 的 conf 文件夹中的文件。通常我会在这个文件中放置多个 webapp 的配置,在 war 之外。 我想使用类路径独立于文件系统。 我过去使用过 lib 文件
我有一个 PowerShell 脚本,它获取文件列表并移动满足特定条件的文件。为什么即使对象为空,foreach 循环也会运行? 我假设如果 $i 不存在,它就不会运行。但是如果 $filePath
我已将 BasicAccountRule.drl 放置在我的 Web 应用程序中,位置为:C:/workspace/exim_design/src/main/resources/rules/drl/i
我使用 File.open('file.txt').class 和 File.open('file.txt').readlines.class 以及前者进行了检查一个返回 File,后者返回 Arra
我正在尝试使用 FileOutputStream 删除文件,在其中写入内容后。这是我用来编写的代码: private void writeContent(File file, String fileC
我正在尝试使用 flink 和 python 批处理 api 测试 Wordcount 经典示例。我的问题是,将数据源从 env.from_elements() 修改为 env.read_text()
我正在尝试制作一个可以同时处理多个不同文件的程序。我的想法是制作一个包含 20 个 FILE* 的数组,以便在我达到此限制时能够关闭其中一个并打开请求的新文件。 为此,我想到了一个函数,它选择一个选项
我有两个文件A和B文件A: 976464 792992 文件B TimeStamp,Record1,976464,8383,ABCD 我想搜索文件 A 和文件 B 中的每条记录并打印匹配的记录。打印的
我有一些保存在 map 中的属性文件。示例: Map map = new HashMap<>(); map.put("1", "One"); map.put("2", "Two"); map.put(
我正在尝试找出一个脚本文件,该文件接受一个包含文件列表的文件(每一行都是一个文件路径,即 path/to/file)并将它们合并到一个文件中。 例如: list.text -- path/to/fil
为了使用 File.CreateText() 和 File.AppendText() 你必须: 通过调用这些方法之一打开流 写消息 关闭流 处理流 为了使用 File.AppendAllText()
使用rsync时,如何在使用--files-from参数复制时重命名文件?我有大约190,000个文件,在从源复制到目标时,每个文件都需要重命名。我计划将文件列表放在一个文本文件中传递给--files
我在非服务器应用程序中使用 Spring(只需从 Eclipse 中某个类的 main() 编译并运行它)。 我的问题是作为 new FileSystemXmlApplicationContext 的
QNX (Neutrino 6.5.0) 使用 ksh 的开源实现作为其 shell 。许多提供的脚本,包括系统启动脚本,都使用诸如 if ! test /dev/slog -ef /dev/slog
当我尝试打开从我的应用程序下载的 xls 文件时,出现此错误: excel cannot open the file because the file format or file extension
有一些相关的概念,即文件指针、流和文件描述符。 我知道文件指针是指向数据类型 FILE 的指针(在例如 FILE.h 和 struct_FILE.h 中声明)。 我知道文件描述符是 int ,例如成员
好吧,这应该很容易... 我是groovy的新手,我希望实现以下逻辑: def testFiles = findAllTestFiles(); 到目前为止,我想出了下面的代码,该代码可以成功打印所有文
我理解为什么以下内容会截断文件的内容: Get-Content | Out-File 这是因为 Out-File 首先运行,它会在 Get-Content 有机会读取文件之前清空文件。 但是当我尝
您好,我正在尝试将文件位置表示为变量,因为最终脚本将在另一台机器上运行。这是我尝试过的代码,然后是我得到的错误。在我看来,python 是如何添加“\”的,这就是导致问题的原因。如果是这种情况,我如何
我有一个只包含一行的输入文件: $ cat input foo bar 我想在我的脚本中使用这一行,据我所知有 3 种方法: line=$(cat input) line=$( input"...,
我是一名优秀的程序员,十分优秀!