linux - 如何从 Shell 脚本逆向 SSH

Question

下午好，

我正在尝试使用 shell 脚本建立反向 SSH 连接。

下面是我的调用命令，从客户端到主机，再返回客户端:(重要数据用xxxxxx替换)

ssh -o StrictHostKeyChecking=no -o ConnectTimeout=15 -R 19999:localhost:22 admin@xx.xxx.xx.xx -v "sshpass -p xxxxxxx ssh -f -N -q -L 0.0.0.0:81:localhost:80 root@localhost -p 19999"

显示下面是 SSH 和 Netstat 命令的输出连接确实显示在 Netstat 上，不幸的是，它显示为 TIME_WAIT 而不是 ESTABLISHED，并且我无法从另一台计算机访问客户端上的端口 80(通过访问主机上的端口 81)

这是建立反向 SSH 连接而无需在主机上键入任何内容的正确方法吗？

如果我手动运行这两个命令

  ssh -o StrictHostKeyChecking=no -o ConnectTimeout=15 -R 19999:localhost:22 dmin@xx.xxx.xx.xx -v 

和

sshpass -p xxxxxxx ssh -f -N -q -L 0.0.0.0:81:localhost:80 root@localhost -p 19999

一切正常，一旦连接到主机，我就没有任何问题，但是我无法通过脚本文件这样做。

编辑:我尝试在客户端和命令的主机部分上使用 -f -N 和 -q 的不同组合，但没有取得任何成功的结果。我得到的最好的结果是显示客户端的固件欢迎消息

命令执行后Netstat输出:

Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
tcp        0      0 xxx.xxxxxxxxx.myvzw.com:xxxx xxxx.us-west-1.compute.xxxxx.com:ssh TIME_WAIT
tcp        0      0 localhost:49553         localhost:ssh           TIME_WAIT
udp        0      0 xxx.xxxxxxxxx.myvzw.com:xxxx xxxxxxx:ntp          ESTABLISHED
Active UNIX domain sockets (w/o servers)

顶级 SSH 命令的调试输出

    OpenSSH_6.6, OpenSSL 1.0.1f 6 Jan 2014
    debug1: Reading configuration data /etc/ssh/ssh_config
    debug1: Connecting to xx.xxx.xxx.xx [xx.xxx.xxx.xx] port 22.
    debug1: fd 3 clearing O_NONBLOCK
    debug1: Connection established.
    debug1: permanently_set_uid: 0/0
    debug1: identity file /root/.ssh/id_rsa type -1
    debug1: identity file /root/.ssh/id_rsa-cert type -1
    debug1: identity file /root/.ssh/id_dsa type -1
    debug1: identity file /root/.ssh/id_dsa-cert type -1
    debug1: identity file /root/.ssh/id_ecdsa type -1
    debug1: identity file /root/.ssh/id_ecdsa-cert type -1
    debug1: identity file /root/.ssh/id_ed25519 type -1
    debug1: identity file /root/.ssh/id_ed25519-cert type -1
    debug1: Enabling compatibility mode for protocol 2.0
    debug1: Local version string SSH-2.0-OpenSSH_6.6
    debug1: Remote protocol version 2.0, remote software version OpenSSH_6.0p1 Debian-4
    debug1: match: OpenSSH_6.0p1 Debian-4 pat OpenSSH* compat 0x04000000
    debug1: SSH2_MSG_KEXINIT sent
    debug1: SSH2_MSG_KEXINIT received
    debug1: kex: server->client aes128-ctr hmac-md5 none
    debug1: kex: client->server aes128-ctr hmac-md5 none
    debug1: sending SSH2_MSG_KEX_ECDH_INIT
    debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
    debug1: Server host key: ECDSA xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx
    debug1: Host 'xx:xxx:xxx:xx' is known and matches the ECDSA host key.
    debug1: Found key in /root/.ssh/known_hosts:5
    debug1: ssh_ecdsa_verify: signature correct
    debug1: SSH2_MSG_NEWKEYS sent
    debug1: expecting SSH2_MSG_NEWKEYS
    debug1: SSH2_MSG_NEWKEYS received
    debug1: Roaming not allowed by server
    debug1: SSH2_MSG_SERVICE_REQUEST sent
    debug1: SSH2_MSG_SERVICE_ACCEPT received
    debug1: Authentications that can continue: publickey
    debug1: Next authentication method: publickey
    debug1: Trying private key: /root/.ssh/id_rsa
    debug1: key_parse_private2: missing begin marker
    debug1: read PEM private key done: type RSA
    debug1: Authentication succeeded (publickey).
    Authenticated to xx:xxx:xxx:xx ([xx:xxx:xxx:xx]:22).
    debug1: Remote connections from LOCALHOST:19999 forwarded to local address localhost:22
    debug1: channel 0: new [client-session]
    debug1: Requesting no-more-sessions@openssh.com
    debug1: Entering interactive session.
    debug1: remote forward success for: listen 19999, connect localhost:22
    debug1: All remote forwarding requests processed
    debug1: Sending command: sleep 5; sshpass -p xxxxxxx ssh -f -N -q -L 0.0.0.0:1195:localhost:1194 root@localhost -p 19999
    debug1: client_input_channel_open: ctype forwarded-tcpip rchan 3 win 2097152 max 32768
    debug1: client_request_forwarded_tcpip: listen localhost port 19999, originator ::1 port 38767
    debug1: connect_next: host localhost ([127.0.0.1]:22) in progress, fd=7
    debug1: channel 1: new [::1]
    debug1: confirm forwarded-tcpip
    debug1: channel 1: connected to localhost port 22
    debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
    debug1: client_input_channel_req: channel 0 rtype eow@openssh.com reply 0
    debug1: channel 0: free: client-session, nchannels 2
    debug1: channel 1: free: ::1, nchannels 1
    Transferred: sent 4768, received 4176 bytes, in 10.4 seconds
    Bytes per second: sent 459.7, received 402.6
    debug1: Exit status 0

谢谢，

Answer 1

我似乎能够通过应用一些“ sleep ”命令来建立反向连接

下面是我的命令

ssh -o StrictHostKeyChecking=no -o ConnectTimeout=15 -f -R 19999:localhost:22 admin@XX.XXX.XXX.XX -v "sleep 5; sshpass -p XXXXXX ssh -L 0.0.0.0:81:localhost:81 root@localhost -p 19999 -v \"sleep 120\" sleep 120"

所以基本上我会在完成第二个连接之前将 ssh 进程置于 sleep 状态，然后立即将第二个连接置于 sleep 状态。

有趣的是，连接在 120 秒后并没有停止，而是保持连接状态。如果有人愿意解释一下为什么会这样，或者有更好的方法，请回复谢谢