- android - 多次调用 OnPrimaryClipChangedListener
- android - 无法更新 RecyclerView 中的 TextView 字段
- android.database.CursorIndexOutOfBoundsException : Index 0 requested, 光标大小为 0
- android - 使用 AppCompat 时,我们是否需要明确指定其 UI 组件(Spinner、EditText)颜色
#define _GNU_SOURCE
#include <pthread.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
void func();
void main(int argc,char **argv)
{
printf("i am main\n");
int clone_flag,arg,retval;
char *stack;
clone_flag=CLONE_VM|CLONE_SIGHAND;
stack=(char*)malloc(4096);
retval=clone((void*)func,&(stack[4095]),clone_flag,NULL);
stack=(char*)malloc(4096);
retval=clone((void*)func,&(stack[4095]),clone_flag,NULL);
}
void func()
{
int i;
for(i=0;i<3;i++)
{
printf("i: %d\n ",i);
}
}
输出:
i am main
i: 0
i: 1
跟踪-f
5915 fstat(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(4, 1), ...}) = 0
5915 ioctl(1, TCGETS, {B38400 opost isig icanon echo ...}) = 0
5915 brk(NULL) = 0xaf2000
5915 brk(0xb14000) = 0xb14000
5915 write(1, "i am main\n", 10) = 10
5915 clone(child_stack=0xaf400f, flags=CLONE_VM|CLONE_SIGHAND) = 5916
5915 clone(child_stack=0xaf501f, flags=CLONE_VM|CLONE_SIGHAND) = 5917
5915 exit_group(5917) = ?
5915 +++ exited with 29 +++
5917 write(1, "i", 1) = 1
5917 write(1, ": 0\n ", 5) = 5
5917 write(1, "i", 1) = 1
5917 write(1, ": 1\n ", 5) = 5
5916 --- SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0xaf194f} ---
5916 +++ killed by SIGSEGV (core dumped) +++
5917 +++ killed by SIGSEGV +++
gdb ./a.out 核心
Core was generated by `./a.out'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 buffered_vfprintf (s=0x7f737fd43620 <_IO_2_1_stdout_>,
format=0x40074e "i: %d\n ", args=0x1f49f27) at vfprintf.c:2299
2299 vfprintf.c: No such file or directory.
[Current thread is 1 (LWP 6280)]
(gdb) where
#0 buffered_vfprintf (s=0x7f737fd43620 <_IO_2_1_stdout_>,
format=0x40074e "i: %d\n ", args=0x1f49f27) at vfprintf.c:2299
#1 0x00007f737f9cb32d in _IO_vfprintf_internal (
s=0x7f737fd43620 <_IO_2_1_stdout_>, format=0x40074e "i: %d\n ",
ap=ap@entry=0x1f49f27) at vfprintf.c:1293
#2 0x00007f737f9d3899 in __printf (format=<optimized out>) at printf.c:33
#3 0x00000000004006a8 in func () at code.c:23
#4 0x00007f737fa8541d in clone ()
at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109
如果我删除"printf("i am main\n");"会令人困惑代码将运行良好
跟踪
5937 brk(NULL) = 0x1f75000
5937 brk(0x1f97000) = 0x1f97000
5937 clone(child_stack=0x1f75fff, flags=CLONE_VM|CLONE_SIGHAND) = 5938
5937 clone(child_stack=0x1f7700f, flags=CLONE_VM|CLONE_SIGHAND) = 5939
5937 exit_group(5939) = ?
5937 +++ exited with 51 +++
5939 fstat(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(4, 1), ...}) = 0
5939 ioctl(1, TCGETS, {B38400 opost isig icanon echo ...}) = 0
5939 write(1, "i: 0\n", 5) = 5
5939 write(1, " i: 1\n", 6) = 6
5939 write(1, " i: 2\n", 6) = 6
5938 write(1, " i: 2\ni: 0\n", 11) = 11
5939 exit_group(6) = ?
5939 +++ exited with 6 +++
5938 write(1, " i: 1\n", 6) = 6
5938 write(1, " i: 2\n", 6) = 6
5938 exit_group(6) = ?
5938 +++ exited with 6 +++
为什么“printf”有这么大的不同?(顺便说一下,为什么 SIGSEGV 杀死了另一个进程?)
最佳答案
您对 printf
的调用溢出了可用堆栈。 4096 字节不足以满足它需要做的所有事情。为了确认,这里有一个示例 gdb session :
Reading symbols from ./a.out...done.
(gdb) break 14
Breakpoint 1 at 0x400624: file source.c, line 14.
(gdb) break 16
Breakpoint 2 at 0x400659: file source.c, line 16.
(gdb) break func
Breakpoint 3 at 0x40068b: file source.c, line 21.
(gdb) run
Starting program: a.out
i am main
Breakpoint 1, main (argc=1, argv=0x7fffffffe3a8) at source.c:14
14 retval=clone((void*)func,&(stack[4095]),clone_flag,NULL);
(gdb) print/x stack
$1 = 0x602420
(gdb) cont
Continuing.
[New LWP 25381]
[Switching to LWP 25381]
Thread 2 hit Breakpoint 3, func () at source.c:21
21 for(i=0;i<3;i++)
(gdb) print/x &i
$2 = 0x60340b
(gdb) watch $rsp < 0x602420
Watchpoint 4: $rsp < 0x602420
我已经要求 gdb
在堆栈指针(x86-64 机器上的 $rsp
;根据您的 CPU 可能需要不同的寄存器)低于以下值时停止分配的堆栈范围的开始。
(gdb) cont
Continuing.
[Switching to LWP 25375]
Thread 1 "a.out" hit Breakpoint 2, main (argc=1, argv=0x7fffffffe3a8) at source.c:16
16 retval=clone((void*)func,&(stack[4095]),clone_flag,NULL);
(gdb) print/x stack
$3 = 0x603430
(gdb) cont
Continuing.
[New LWP 25383]
[Switching to LWP 25383]
Thread 3 hit Breakpoint 3, func () at source.c:21
21 for(i=0;i<3;i++)
(gdb) cont
Continuing.
[Switching to LWP 25381]
Thread 2 hit Watchpoint 4: $rsp < 0x602420
Old value = 0
New value = 1
buffered_vfprintf (s=0x7ffff7dd2620 <_IO_2_1_stdout_>, format=0x40074e "i: %d\n ", args=0x603327) at vfprintf.c:2295
2295 vfprintf.c: No such file or directory.
(gdb) where
#0 buffered_vfprintf (s=0x7ffff7dd2620 <_IO_2_1_stdout_>, format=0x40074e "i: %d\n ", args=0x603327) at vfprintf.c:2295
#1 0x00007ffff7a5a32d in _IO_vfprintf_internal (s=0x7ffff7dd2620 <_IO_2_1_stdout_>, format=0x40074e "i: %d\n ",
ap=ap@entry=0x603327) at vfprintf.c:1293
#2 0x00007ffff7a62899 in __printf (format=<optimised out>) at printf.c:33
#3 0x00000000004006a8 in func () at source.c:23
#4 0x00007ffff7b1441d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109
我们现在可以看到堆栈指针已经远远低于分配的堆栈范围。
(gdb) print/x $rsp
$4 = 0x600c4f
关于 printf
有什么不同,您可以比较执行跟踪(使用 a simple si
loop 生成)。我发现它们首先在this test处发生分歧:
if (UNBUFFERED_P (s))
/* Use a helper function which will allocate a local temporary buffer
for the stream and then call us again. */
return buffered_vfprintf (s, format, ap, mode_flags);
看来前面调用printf
已经把stdout
的模式改成了“unbuffered”,所以后面的printf
需要去更深入地使用它。您可以通过将第一个 printf
替换为 setbuf(stdout,NULL)
来重现这一点。
然而,真正的问题不是为什么 printf
会有所不同,而是“它是如何工作的?”。共有三个进程,其中两个对它们共享的内存空间粗心大意,因此它们是否以及何时中断取决于时间。
关于c - printf 在共享内存中做了什么,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/58731945/
我在具有 2CPU 和 3.75GB 内存 (https://aws.amazon.com/ec2/instance-types/) 的 c3.large Amazon EC2 ubuntu 机器上运
我想通过用户空间中的mmap-ing并将地址发送到内核空间从用户空间写入VGA内存(视频内存,而不是缓冲区),我将使用pfn remap将这些mmap-ed地址映射到vga内存(我将通过 lspci
在 Mathematica 中,如果你想让一个函数记住它的值,它在语法上是很轻松的。例如,这是标准示例 - 斐波那契: fib[1] = 1 fib[2] = 1 fib[n_]:= fib[n] =
我读到动态内存是在运行时在堆上分配的,而静态内存是在编译时在堆栈上分配的,因为编译器知道在编译时必须分配多少内存。 考虑以下代码: int n; cin>>n; int a[n]; 如果仅在运行期间读
我是 Python 的新手,但我之前还不知道这一点。我在 for 循环中有一个基本程序,它从站点请求数据并将其保存到文本文件但是当我检查我的任务管理器时,我发现内存使用量只增加了?长时间运行时,这对我
我正在设计一组数学函数并在 CPU 和 GPU(使用 CUDA)版本中实现它们。 其中一些函数基于查找表。大多数表占用 4KB,其中一些占用更多。基于查找表的函数接受一个输入,选择查找表的一两个条目,
读入一个文件,内存被动态分配给一个字符串,文件内容将被放置在这里。这是在函数内部完成的,字符串作为 char **str 传递。 使用 gdb 我发现在行 **(str+i) = fgetc(aFil
我需要证实一个理论。我正在学习 JSP/Java。 在查看了一个现有的应用程序(我没有写)之后,我注意到一些我认为导致我们的性能问题的东西。或者至少是其中的一部分。 它是这样工作的: 1)用户打开搜索
n我想使用memoization缓存某些昂贵操作的结果,这样就不会一遍又一遍地计算它们。 两个memoise和 R.cache适合我的需要。但是,我发现缓存在调用之间并不可靠。 这是一个演示我看到的问
我目前正在分析一些 javascript shell 代码。这是该脚本中的一行: function having() { memory = memory; setTimeout("F0
我有一种情况,我想一次查询数据库,然后再将整个数据缓存在内存中。 我得到了内存中 Elasticsearch 的建议,我用谷歌搜索了它是什么,以及如何在自己的 spring boot 应用程序中实现它
我正在研究 Project Euler (http://projecteuler.net/problem=14) 的第 14 题。我正在尝试使用内存功能,以便将给定数字的序列长度保存为部分结果。我正在
所以,我一直在做 Java 内存/注意力游戏作业。我还没有达到我想要的程度,它只完成了一半,但我确实让 GUI 大部分工作了......直到我尝试向我的框架添加单选按钮。我认为问题可能是因为我将 JF
我一直在尝试使用 Flask-Cache 的 memoize 功能来仅返回 statusTS() 的缓存结果,除非在另一个请求中满足特定条件,然后删除缓存。 但它并没有被删除,并且 Jinja 模板仍
我对如何使用 & 运算符来减少内存感到非常困惑。 我可以回答下面的问题吗? clase C{ function B(&$a){ $this->a = &$a; $thi
在编写代码时,我遇到了一个有趣的问题。 我有一个 PersonPOJO,其 name 作为其 String 成员之一及其 getter 和 setter class PersonPOJO { priv
在此代码中 public class Base { int length, breadth, height; Base(int l, int b, int h) { l
Definition Structure padding is the process of aligning data members of the structure in accordance
在 JavaScript Ninja 的 secret 中,作者提出了以下方案,用于在没有闭包的情况下内存函数结果。他们通过利用函数是对象这一事实并在函数上定义一个属性来存储过去调用函数的结果来实现这
我正在尝试找出 map 消耗的 RAM 量。所以,我做了以下事情;- Map cr = crPair.collectAsMap(); // 200+ entries System.out.printl
我是一名优秀的程序员,十分优秀!