- android - 多次调用 OnPrimaryClipChangedListener
- android - 无法更新 RecyclerView 中的 TextView 字段
- android.database.CursorIndexOutOfBoundsException : Index 0 requested, 光标大小为 0
- android - 使用 AppCompat 时,我们是否需要明确指定其 UI 组件(Spinner、EditText)颜色
我正在尝试编译新版本的 OpenCV 3.3
(2017 年 8 月 3 日发布),但出现了 C++11
错误/p>
这是我的 cmake
命令行:
cmake -D CMAKE_BUILD_TYPE=RELEASE \
-D CMAKE_INSTALL_PREFIX=/usr/local \
-D WITH_CUDA=ON \
-D ENABLE_FAST_MATH=1 \
-D CUDA_FAST_MATH=1 \
-D WITH_CUBLAS=1 \
-DINSTALL_C_EXAMPLES=OFF \
-D INSTALL_PYTHON_EXAMPLES=ON \
-D OPENCV_EXTRA_MODULES_PATH=../../opencv_contrib-3.3/modules \
-D BUILD_SHARED_LIBS=ON \
-D WITH_GTK=ON /
-D BUILD_EXAMPLES=ON ..
我通过打开一些组件来编辑 CMakeLists(即使没有做任何更改,错误仍然存在):
OCV_OPTION(WITH_OPENGL "Include OpenGL support" ON IF (NOT ANDROID AND NOT WINRT) )
OCV_OPTION(WITH_OPENVX "Include OpenVX support" ON)
OCV_OPTION(WITH_OPENNI "Include OpenNI support" ON IF (NOT ANDROID AND NOT IOS AND NOT WINRT) )
OCV_OPTION(WITH_OPENNI2 "Include OpenNI2 support" ON IF (NOT ANDROID AND NOT IOS AND NOT WINRT) )
OCV_OPTION(WITH_OPENMP "Include OpenMP support" ON)
OCV_OPTION(WITH_OPENCL_SVM "Include OpenCL Shared Virtual Memory support" ON ) # experimental
这是我的 CMakeError.log
文件:
Compilation failed:
source file: '/home/jhros/opencv-3.3.0/cmake/checks/cxx11.cpp'
check option: ''
===== BUILD LOG =====
Change Dir: /home/jhros/opencv-3.3.0/build/CMakeFiles/CMakeTmp
Run Build Command:"/usr/bin/make" "cmTC_f915e/fast"
/usr/bin/make -f CMakeFiles/cmTC_f915e.dir/build.make CMakeFiles/cmTC_f915e.dir/build
make[1]: Entering directory '/home/jhros/opencv-3.3.0/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_f915e.dir/cxx11.cpp.o
/usr/bin/c++ -o CMakeFiles/cmTC_f915e.dir/cxx11.cpp.o -c /home/jhros/opencv-3.3.0/cmake/checks/cxx11.cpp
/home/jhros/opencv-3.3.0/cmake/checks/cxx11.cpp:4:2: error: #error "C++11 is not supported"
#error "C++11 is not supported"
^
/home/jhros/opencv-3.3.0/cmake/checks/cxx11.cpp: In function ‘int main()’:
/home/jhros/opencv-3.3.0/cmake/checks/cxx11.cpp:11:10: error: ‘res’ does not name a type
auto res = test();
^
/home/jhros/opencv-3.3.0/cmake/checks/cxx11.cpp:12:12: error: ‘res’ was not declared in this scope
return res;
^
CMakeFiles/cmTC_f915e.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_f915e.dir/cxx11.cpp.o' failed
make[1]: *** [CMakeFiles/cmTC_f915e.dir/cxx11.cpp.o] Error 1
make[1]: Leaving directory '/home/jhros/opencv-3.3.0/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_f915e/fast' failed
make: *** [cmTC_f915e/fast] Error 2
还有我的 CMakeLists(不是全部):
# ----------------------------------------------------------------------------
# Root CMake file for OpenCV
#
# From the off-tree build directory, invoke:
# $ cmake <PATH_TO_OPENCV_ROOT>
#
# ----------------------------------------------------------------------------
# Disable in-source builds to prevent source tree corruption.
if(" ${CMAKE_SOURCE_DIR}" STREQUAL " ${CMAKE_BINARY_DIR}")
message(FATAL_ERROR "
FATAL: In-source builds are not allowed.
You should create separate directory for build files.
")
endif()
include(cmake/OpenCVMinDepVersions.cmake)
if(CMAKE_GENERATOR MATCHES Xcode AND XCODE_VERSION VERSION_GREATER 4.3)
cmake_minimum_required(VERSION 3.0 FATAL_ERROR)
elseif(CMAKE_SYSTEM_NAME MATCHES WindowsPhone OR CMAKE_SYSTEM_NAME MATCHES WindowsStore)
cmake_minimum_required(VERSION 3.1 FATAL_ERROR)
#Required to resolve linker error issues due to incompatibility with CMake v3.0+ policies.
#CMake fails to find _fseeko() which leads to subsequent linker error.
#See details here: http://www.cmake.org/Wiki/CMake/Policies
cmake_policy(VERSION 2.8)
else()
cmake_minimum_required(VERSION "${MIN_VER_CMAKE}" FATAL_ERROR)
endif()
# Following block can broke build in case of cross-compilng
# but CMAKE_CROSSCOMPILING variable will be set only on project(OpenCV) command
# so we will try to detect crosscompiling by presense of CMAKE_TOOLCHAIN_FILE
if(NOT DEFINED CMAKE_INSTALL_PREFIX)
if(NOT CMAKE_TOOLCHAIN_FILE)
# it _must_ go before project(OpenCV) in order to work
if(WIN32)
set(CMAKE_INSTALL_PREFIX "${CMAKE_BINARY_DIR}/install" CACHE PATH "Installation Directory")
else()
set(CMAKE_INSTALL_PREFIX "/usr/local" CACHE PATH "Installation Directory")
endif()
else(NOT CMAKE_TOOLCHAIN_FILE)
#Android: set output folder to ${CMAKE_BINARY_DIR}
set( LIBRARY_OUTPUT_PATH_ROOT ${CMAKE_BINARY_DIR} CACHE PATH "root for library output, set this to change where android libs are compiled to" )
# any crosscompiling
set(CMAKE_INSTALL_PREFIX "${CMAKE_BINARY_DIR}/install" CACHE PATH "Installation Directory")
endif(NOT CMAKE_TOOLCHAIN_FILE)
endif()
if(CMAKE_SYSTEM_NAME MATCHES WindowsPhone OR CMAKE_SYSTEM_NAME MATCHES WindowsStore)
set(WINRT TRUE)
endif(CMAKE_SYSTEM_NAME MATCHES WindowsPhone OR CMAKE_SYSTEM_NAME MATCHES WindowsStore)
if(WINRT)
add_definitions(-DWINRT -DNO_GETENV)
# Making definitions available to other configurations and
# to filter dependency restrictions at compile time.
if(CMAKE_SYSTEM_NAME MATCHES WindowsPhone)
set(WINRT_PHONE TRUE)
add_definitions(-DWINRT_PHONE)
elseif(CMAKE_SYSTEM_NAME MATCHES WindowsStore)
set(WINRT_STORE TRUE)
add_definitions(-DWINRT_STORE)
endif()
if(CMAKE_SYSTEM_VERSION MATCHES 10)
set(WINRT_10 TRUE)
add_definitions(-DWINRT_10)
elseif(CMAKE_SYSTEM_VERSION MATCHES 8.1)
set(WINRT_8_1 TRUE)
add_definitions(-DWINRT_8_1)
elseif(CMAKE_SYSTEM_VERSION MATCHES 8.0)
set(WINRT_8_0 TRUE)
add_definitions(-DWINRT_8_0)
endif()
endif()
if(POLICY CMP0020)
cmake_policy(SET CMP0020 OLD)
endif()
if(POLICY CMP0022)
cmake_policy(SET CMP0022 OLD)
endif()
if(POLICY CMP0023)
cmake_policy(SET CMP0023 NEW)
endif()
if(POLICY CMP0026)
# silence cmake 3.0+ warnings about reading LOCATION attribute
cmake_policy(SET CMP0026 OLD)
endif()
if(POLICY CMP0042)
cmake_policy(SET CMP0042 NEW)
endif()
if(POLICY CMP0046)
cmake_policy(SET CMP0046 OLD)
endif()
if(POLICY CMP0051)
cmake_policy(SET CMP0051 NEW)
endif()
if(POLICY CMP0056)
cmake_policy(SET CMP0056 NEW)
endif()
if(POLICY CMP0067)
cmake_policy(SET CMP0067 NEW)
endif()
include(cmake/OpenCVUtils.cmake)
# must go before the project command
ocv_update(CMAKE_CONFIGURATION_TYPES "Debug;Release" CACHE STRING "Configs" FORCE)
if(DEFINED CMAKE_BUILD_TYPE)
set_property( CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS ${CMAKE_CONFIGURATION_TYPES} )
endif()
enable_testing()
project(OpenCV CXX C)
if(MSVC)
set(CMAKE_USE_RELATIVE_PATHS ON CACHE INTERNAL "" FORCE)
endif()
ocv_cmake_eval(DEBUG_PRE ONCE)
ocv_clear_vars(OpenCVModules_TARGETS)
include(cmake/OpenCVDownload.cmake)
# ----------------------------------------------------------------------------
# Break in case of popular CMake configuration mistakes
# ----------------------------------------------------------------------------
if(NOT CMAKE_SIZEOF_VOID_P GREATER 0)
message(FATAL_ERROR "CMake fails to deterimine the bitness of target platform.
Please check your CMake and compiler installation. If you are crosscompiling then ensure that your CMake toolchain file correctly sets the compiler details.")
endif()
# ----------------------------------------------------------------------------
# Detect compiler and target platform architecture
# ----------------------------------------------------------------------------
OCV_OPTION(ENABLE_CXX11 "Enable C++11 compilation mode" "${OPENCV_CXX11}")
include(cmake/OpenCVDetectCXXCompiler.cmake)
# Add these standard paths to the search paths for FIND_LIBRARY
# to find libraries from these locations first
if(UNIX AND NOT ANDROID)
if(X86_64 OR CMAKE_SIZEOF_VOID_P EQUAL 8)
if(EXISTS /lib64)
list(APPEND CMAKE_LIBRARY_PATH /lib64)
else()
list(APPEND CMAKE_LIBRARY_PATH /lib)
endif()
if(EXISTS /usr/lib64)
list(APPEND CMAKE_LIBRARY_PATH /usr/lib64)
else()
list(APPEND CMAKE_LIBRARY_PATH /usr/lib)
endif()
elseif(X86 OR CMAKE_SIZEOF_VOID_P EQUAL 4)
if(EXISTS /lib32)
list(APPEND CMAKE_LIBRARY_PATH /lib32)
else()
list(APPEND CMAKE_LIBRARY_PATH /lib)
endif()
if(EXISTS /usr/lib32)
list(APPEND CMAKE_LIBRARY_PATH /usr/lib32)
else()
list(APPEND CMAKE_LIBRARY_PATH /usr/lib)
endif()
endif()
endif()
# Add these standard paths to the search paths for FIND_PATH
# to find include files from these locations first
if(MINGW)
if(EXISTS /mingw)
list(APPEND CMAKE_INCLUDE_PATH /mingw)
endif()
if(EXISTS /mingw32)
list(APPEND CMAKE_INCLUDE_PATH /mingw32)
endif()
if(EXISTS /mingw64)
list(APPEND CMAKE_INCLUDE_PATH /mingw64)
endif()
endif()
编辑
CMake 版本 -3.5
编译器 GNU 5.4.1
EDIT2
我现在正在使用 GNU 7.1.0 进行编译,但出现了不同的错误
Build output check failed:
Regex: 'command line option .* is valid for .* but not for C\+\+'
Output line: 'cc1plus: warning: command line option ‘-Wmissing-prototypes’ is valid for C/ObjC but not for C++'
Compilation failed:
source file: '/home/jhros/opencv-3.3.0/build/CMakeFiles/CMakeTmp/src.cxx'
check option: ' -fsigned-char -W -Wall -Werror=return-type -Werror=non-virtual-dtor -Werror=address -Werror=sequence-point -Wformat -Werror=format-security -Wmissing-declarations -Wmissing-prototypes'
最佳答案
我终于成功地从源代码编译了OpenCV 3.3
,但是我仍然不知道为什么它之前不能编译。我所修改的只是标记 OPENCV_EXTRA_MODULES_PATH
到 opencv_contrib 3.3.0
模块源文件的引用,如下所示:
$ cmake \
-D CMAKE_BUILD_TYPE=RELEASE \
-D CMAKE_INSTALL_PREFIX=/usr/local \
-D WITH_CUDA=ON \
-D ENABLE_FAST_MATH=1 \
-D CUDA_FAST_MATH=1 \
-D WITH_CUBLAS=1 \
-D INSTALL_C_EXAMPLES=OFF \
-D INSTALL_PYTHON_EXAMPLES=ON \
-D OPENCV_EXTRA_MODULES_PATH=/home/jhros/opencv-3.3.0/opencv_contrib-3.3.0/modules \
-D BUILD_SHARED_LIBS=ON \
-D WITH_GTK=ON \
-D BUILD_EXAMPLES=ON ..
我收到了无数种警告(以及许多其他警告):
warning: dynamic exception specifications are deprecated in C++11
而且你可能会遇到 cuda 不支持的较新版本的 GCC
错误:
#error -- unsupported GNU version! gcc versions later than 5 are not supported!
但这可以通过设置 cmake
在编译 OpenCV
时使用旧版本的 GCC
来解决
CMAKE_C_COMPILER=/usr/bin/gcc-5
关于opencv - 编译 OpenCV 3.3 : C++11 is not supported,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/45521747/
是否有任何库或框架旨在促进从另一种成熟的编程语言中构建项目? 在 C++、java 等编程语言中指定逻辑、集合和复杂规则非常容易,但在 Makefile 中完成这些事情似乎是一场艰苦的战斗。我还没有深
我有这段代码可以用 clang 编译得很好(即使使用 -Weverything),但是 gcc 会发出错误。 #include #include #include using namespace
我有以下 block 头文件 BKE_mesh.h: /* Connectivity data */ typedef struct IndexNode { struct IndexNode *
我在我的一个项目中遇到了一个奇怪的问题。我的代码库依赖于一个外部库,其中包含一个名为 Dataset 的类. Dataset类私有(private)继承自 std::vector (其中 Sample
当使用 gcc、g++ 或 make 在终端中编译一个小型 C 或 C++ 项目时,我收到以下错误: /tmp/ccG1caGi.o: In function `main': main.c:(.tex
我正在尝试从 CVS 为 Windows 上的 Emacs 23.1.50 编译 CEDET,但在“第 6 步:打开 EDE...”时出现错误:“defvar:作为变量的符号值是无效的:cedet-m
我正在(重新)学习编程,我从 C 开始。我的 IDE(如果我可以这么说)是 Windows7 上的 cygwin(32 位)和 Visual-Studio 2010。我总是编译我用 gcc (cygw
我喜欢在模板类中使用本地类来执行类似“static if”的构造。但是我遇到了 gcc 4.8 不想编译我的代码的问题。但是 4.7 可以。 这个例子: #include #include #in
我有一个项目,必须仅使用 java 1.4 进行编译。但我计划使用mockito 编写一些单元测试。我想要一种在 pom 中指定的方法,以便 src/main/java 使用 jdk 1.4 编译,但
我想了解 PHP 编译过程是如何工作的。 假设我有一个名为funcs.php 的文件并且这个文件有三个函数,如果我include 或require 它,所有的在文件加载期间编译三个函数?或者源代码会被
编译工具链 我们写程序的时候用的都是集成开发环境 (IDE: Integrated Development Environment),集成开发环境可以极大地方便我们程序员编写程序,但是配置起来
当我编写一些 Scala 代码时,在尝试编译代码时收到一条奇怪的错误消息。我将代码分解为一个更简单的代码(从语义的角度来看这完全没有意义,但仍然显示了错误)。 scala> :paste // Ent
我正在编译一个 SCSS 文件,它似乎删除了我的评论。我可以使用什么命令来保留所有评论? >SASS input.scss output.css 我在 SCSS 中看到两种类型的注释。 // Comm
这是我的代码: #include typedef struct { const char *description; float value; int age; } swag
当您编译 grails war 时,我知道 .groovy 代码被编译为字节码类文件,但我不明白容器(例如 tomcat)如何在请求 GSP 时知道如何编译它们。容器了解 GSP 吗?安装在服务器上的
我正在努力将多个文件编译成一个通用程序。我收到一个错误: undefined reference to 'pi' 这是我的代码和 Makefile 的框架。我做错了什么?谢谢! 文件:calcPi.c
我尝试使用 LD_PRELOAD 来 Hook sprintf function ,所以我将打印到缓冲区的结果: #define _GNU_SOURCE #include #include int
我正在寻找最简单的方法来自动将 CoffeeScript 重新编译为 JS。 阅读documentation但仍然很难得到我想要的东西。 我需要它来监视文件夹 src/ 中的任何 *.coffee 文
我想使用定制waveformjs 。我发现this on SO但是,我不知道如何编译/安装波形来开始。我从 GitHub 克隆它并进行了更改,但是我不知道如何将其转换为 .js 文件。 最佳答案 为了
很难说出这里问的是什么。这个问题是含糊的、模糊的、不完整的、过于宽泛的或修辞性的,无法以目前的形式得到合理的回答。如需帮助澄清此问题以便重新打开它,visit the help center 。 已关
我是一名优秀的程序员,十分优秀!