- android - 多次调用 OnPrimaryClipChangedListener
- android - 无法更新 RecyclerView 中的 TextView 字段
- android.database.CursorIndexOutOfBoundsException : Index 0 requested, 光标大小为 0
- android - 使用 AppCompat 时,我们是否需要明确指定其 UI 组件(Spinner、EditText)颜色
我试着插入,我看到了:
rusik@rusik-K50AF:~/work/ruby/blog3$ git push heroku master Counting
objects: 119, done. Delta compression using up to 2 threads.
Compressing objects: 100% (105/105), done. Writing objects: 100%
(119/119), 31.46 KiB, done. Total 119 (delta 16), reused 0 (delta 0)
-----> Heroku receiving push
-----> Ruby/Rails app detected
-----> Detected Rails is not set to serve static_assets
Installing rails3_serve_static_assets... done
-----> Configure Rails 3 to disable x-sendfile
Installing rails3_disable_x_sendfile... done
-----> Configure Rails to log to stdout
Installing rails_log_stdout... done
-----> Gemfile detected, running Bundler version 1.0.7
Unresolved dependencies detected; Installing...
Using --without development:test
Fetching source index for http://rubygems.org/
Installing rake (0.9.2.2)
Installing multi_json (1.0.3)
Installing activesupport (3.1.1)
Installing builder (3.0.0)
Installing i18n (0.6.0)
Installing activemodel (3.1.1)
Installing erubis (2.7.0)
Installing rack (1.3.5)
Installing rack-cache (1.1)
Installing rack-mount (0.8.3)
Installing rack-test (0.6.1)
Installing hike (1.2.1)
Installing tilt (1.3.3)
Installing sprockets (2.0.3)
Installing actionpack (3.1.1)
Installing mime-types (1.17.2)
Installing polyglot (0.3.3)
Installing treetop (1.4.10)
Installing mail (2.3.0)
Installing actionmailer (3.1.1)
Installing arel (2.2.1)
Installing tzinfo (0.3.31)
Installing activerecord (3.1.1)
Installing activeresource (3.1.1)
Installing coffee-script-source (1.1.3)
Installing execjs (1.2.9)
Installing coffee-script (2.2.0)
Installing rack-ssl (1.3.2)
Installing json (1.6.1) with native extensions
Installing rdoc (3.11)
Installing thor (0.14.6)
Installing railties (3.1.1)
Installing coffee-rails (3.1.1)
/usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/specification.rb:519:in `normalize_yaml_input': invalid byte sequence in US-ASCII (Argumen
tError)
from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/specification.rb:479:in
`from_yaml'
from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package/tar_input.rb:183:in
`load_gemspec'
from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package/tar_input.rb:51:in
`block in initialize'
from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package/tar_reader.rb:64:in
`block in each'
from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package/tar_reader.rb:55:in
`loop'
from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package/tar_reader.rb:55:in
`each'
from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package/tar_input.rb:32:in
`initialize'
from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package/tar_input.rb:17:in
`new'
from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package/tar_input.rb:17:in
`open'
from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/package.rb:58:in `open'
from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/format.rb:63:in `from_io'
from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/format.rb:51:in `block in from_file_by_path'
from /usr/ruby1.9.2/lib/ruby/1.9.1/open-uri.rb:35:in `open'
from /usr/ruby1.9.2/lib/ruby/1.9.1/open-uri.rb:35:in `open'
from /usr/ruby1.9.2/lib/ruby/1.9.1/rubygems/format.rb:50:in `from_file_by_path'
from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/source.rb:72:in `fetch'
from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/installer.rb:45:in
`block in run'
from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/spec_set.rb:12:in
`block in each'
from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/spec_set.rb:12:in
`each'
from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/spec_set.rb:12:in
`each'
from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/installer.rb:44:in
`run'
from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/installer.rb:8:in
`install'
from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/cli.rb:225:in `install'
from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/vendor/thor/task.rb:22:in
`run'
from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/vendor/thor/invocation.rb:118:in
`invoke_task'
from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/vendor/thor.rb:246:in
`dispatch'
from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/lib/bundler/vendor/thor/base.rb:389:in
`start'
from /usr/ruby1.9.2/lib/ruby/gems/1.9.1/gems/bundler-1.0.7/bin/bundle:13:in
`<top (required)>'
from /usr/ruby1.9.2/bin/bundle:19:in `load'
from /usr/ruby1.9.2/bin/bundle:19:in `<main>'
FAILED: http://devcenter.heroku.com/articles/bundler ! Heroku push rejected, failed to install gems via Bundler
To git@heroku.com:furious-river-2242.git ! [remote rejected] master
-> master (pre-receive hook declined) error: failed to push some refs to 'git@heroku.com:furious-river-2242.git'
所以,当然看起来像 this我把gemfile里面的db改成了pg+bundle install,bundler之后就没有错误了。但我又看到了。这是我的 gemfile
source 'http://rubygems.org'
gem 'rails', '3.1.1'
# Bundle edge Rails instead:
# gem 'rails', :git => 'git://github.com/rails/rails.git'
#gem 'sqlite3'
# Gems used only for assets and not required
# in production environments by default.
group :assets do
gem 'sass-rails', '~> 3.1.4'
gem 'coffee-rails', '~> 3.1.1'
gem 'uglifier', '>= 1.0.3'
end
gem 'jquery-rails'
group :production, :staging do
#gem "mysql2"
#gem 'sqlite3-ruby', :require => 'sqlite3'
gem "pg"
end
group :development, :test do
gem "pg"
#gem "sqlite3-ruby", :require => "sqlite3"
end
#gem 'ruby-xslt'
# To use ActiveModel has_secure_password
# gem 'bcrypt-ruby', '~> 3.0.0'
# Use unicorn as the web server
# gem 'unicorn'
# Deploy with Capistrano
# gem 'capistrano'
# To use debugger
# gem 'ruby-debug19', :require => 'ruby-debug'
group :test do
# Pretty printed test output
gem 'turn', :require => false
end
为什么?
最佳答案
你可以更改为 pg 并添加以下行吗
group :production do
gem 'pg', '0.12.2'
end
然后执行,如果遇到任何问题请告诉我?
关于ruby-on-rails - 如何推送 heroku master?,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/8248289/
我正在尝试将多个值放入数组中。 当我使用时: csvData.push('data[0][index],data[1][index],data[2][index],data[3][index]');
我想在数组声明中直接使用函数 push(),但它不能正常工作。在我的示例中,我的数组返回值 2 : var j = ["b"].push("a"); document.write(j); // ret
我编写了以下Powershell,它为所选文件夹中的所有驱动程序创建了一个bat安装程序,然后应重新启动PC。 New-Item C:\Tools\Drivers\DellLatitude3450.b
例: $ git clone git@gitlab:carlos/test.git Cloning into 'asd'... ssh: connect to host gitlab port 22:
我正在构建一个具有数组类型属性的对象数组: 这里是一些简化的代码: var _data = []; for(var i=0;i<10;i++) { var element = {
我有一个简单的 PHP/MySql 应用程序,它通常会选择几个数据库之一(假设每个客户一个)进行操作。但是,经常调用访问公共(public)数据库的实用程序函数。 我不想在我的代码中散布 USE 子句
我在推送 View Controller 时遇到问题。这就是我所做的:单击一个按钮,我使用这段代码添加了一个模态视图,我工作正常: - (void)addAction:(id)sender {
我想为socket can写一个android系统服务器。我目前正在设计这个,想知道是否有任何方法可以在 Linux/POSIX 套接字上的数据是否可用而无需调用 read() 并随时轮询结果的情况下
我正在编写一个 Bootstrap 站点,我想知道这是否可以接受。该网站看起来像我想要的那样,但我想知道这是否是最佳做法? 我采用的方法是对每两个缺失的列使用 1 个偏
删除远程分支是通过: git push origin :master 如果本地在远程之后,则需要完成: git push --force origin :master 但是强制删除例如master 基
假设我有一个 git 服务器。在每次推送时,我都需要启动一个进程,我可以通过一个钩子(Hook)来完成。 需要将进程的标准输出写入执行推送的 git 客户端。这与 Heroku 或 Openshift
我刚刚开始学习 Git,有些事情我无法解决。在我的 Mac 上本地创建和使用 git 存储库后,我可以将副本推送到其他地方的另一台服务器吗?我在防火墙后面,所以不幸的是我无法从另一台机器运行 git
这个问题在这里已经有了答案: warning: remote HEAD refers to nonexistent ref, unable to checkout (13 个答案) 关闭 7 年前。
我已经安装了 SCM Sync 配置插件(0.0.10)来将我的 jenkins 设置保存在我的 git 存储库中。 我已经设置了 git url 存储库但插件没有提交/推送,请看截图 我试过: 私钥
这可能看起来很矛盾,我知道 secret 变更集是私有(private)的,但是如果我想备份这些 secret 变更集怎么办? 我与一些分支并行工作,有时我想插入一个,而不是其他的。为了实现这一点,我
我正在使用 TortoiseHg用于版本控制。提交到本地后,我推送到远程存储库。如何撤消到特定的提交点? 有三个不同的插入,我想恢复到第一个插入。我读到了 Mercurial 回滚和 hg 撤销 命令
我知道以前有人问过这个问题,但我似乎无法理解这件事...... git checkout master git pull git git checkout feature git rebase ori
下面的代码片段中 return { Push:function ..... 的含义是什么?当我用谷歌搜索时,我发现push()方法将新项目添加到数组的末尾,并返回新的长度。所以我不确定什么是push:
我正在使用 Mercurial 1.6。我有一个带有几个子存储库的存储库 (11)。我想将父存储库推送到默认远程存储库,而不推送子存储库。想要这样做的原因包括: 我使用的是 SSH 存储库,需要很长时
我分配了一个按钮来将 segue 推送到另一个 View Controller ,但是当我执行这部分代码时,我得到以下信息: 2014-02-20 10:44:29.357 nar[20244:70b
我是一名优秀的程序员,十分优秀!