- android - 多次调用 OnPrimaryClipChangedListener
- android - 无法更新 RecyclerView 中的 TextView 字段
- android.database.CursorIndexOutOfBoundsException : Index 0 requested, 光标大小为 0
- android - 使用 AppCompat 时,我们是否需要明确指定其 UI 组件(Spinner、EditText)颜色
我有一个从 IntentService 调用的 BluetoothLeService。 BLEService 在连接之前工作正常。与 iBeacon 建立连接后,调用 ;
public void onConnectionStateChange(BluetoothGatt gatt, int status, int newState) {
String intentAction;
if (newState == BluetoothProfile.STATE_CONNECTED) {
intentAction = ACTION_GATT_CONNECTED;
mConnectionState = STATE_CONNECTED;
broadcastUpdate(intentAction);
Log.i(TAG, "Connected to GATT server.");
// Attempts to discover services after successful connection.
Log.i(TAG, "Attempting to start service discovery:" +
mBluetoothGatt.discoverServices());
} else if (newState == BluetoothProfile.STATE_DISCONNECTED) {
intentAction = ACTION_GATT_DISCONNECTED;
mConnectionState = STATE_DISCONNECTED;
Log.i(TAG, "Disconnected from GATT server.");
broadcastUpdate(intentAction);
}
}
到目前为止一切正常,但之后尽管 mBluetoothGatt.discoverServices() 返回 true,但永远不会调用 onServicesDiscovered(BluetoothGatt gatt, int status)。
--------------------更新-------------------- --------------
在调试时它显示 newState == BluetoothProfile.STATE_CONNECTED 但它并没有真正连接。对于属于不存在的设备的假 ID,它显示相同的结果。
-------------------------------------------- ------------------
这是我的回调
private final BluetoothGattCallback mGattCallback = new BluetoothGattCallback() {
@Override
public void onConnectionStateChange(BluetoothGatt gatt, int status, int newState) {
String intentAction;
if (newState == BluetoothProfile.STATE_CONNECTED) {
intentAction = ACTION_GATT_CONNECTED;
mConnectionState = STATE_CONNECTED;
broadcastUpdate(intentAction);
Log.i(TAG, "Connected to GATT server.");
// Attempts to discover services after successful connection.
Log.i(TAG, "Attempting to start service discovery:" +
mBluetoothGatt.discoverServices());
} else if (newState == BluetoothProfile.STATE_DISCONNECTED) {
intentAction = ACTION_GATT_DISCONNECTED;
mConnectionState = STATE_DISCONNECTED;
Log.i(TAG, "Disconnected from GATT server.");
broadcastUpdate(intentAction);
}
}
@Override
public void onServicesDiscovered(BluetoothGatt gatt, int status) {
if (status == BluetoothGatt.GATT_SUCCESS) {
broadcastUpdate(ACTION_GATT_SERVICES_DISCOVERED);
} else {
Log.w(TAG, "onServicesDiscovered received: " + status);
}
}
@Override
public void onCharacteristicRead(BluetoothGatt gatt,
BluetoothGattCharacteristic characteristic,
int status) {
if (status == BluetoothGatt.GATT_SUCCESS) {
broadcastUpdate(ACTION_DATA_AVAILABLE, characteristic);
}
}
@Override
public void onCharacteristicChanged(BluetoothGatt gatt,
BluetoothGattCharacteristic characteristic) {
broadcastUpdate(ACTION_DATA_AVAILABLE, characteristic);
}
};
我的广播接收器
// Handles various events fired by the Service.
// ACTION_GATT_CONNECTED: connected to a GATT server.
// ACTION_GATT_DISCONNECTED: disconnected from a GATT server.
// ACTION_GATT_SERVICES_DISCOVERED: discovered GATT services.
// ACTION_DATA_AVAILABLE: received data from the device. This can be a result of read
// or notification operations.
private final BroadcastReceiver mGattUpdateReceiver = new BroadcastReceiver() {
@Override
public void onReceive(Context context, Intent intent) {
final String action = intent.getAction();
if (BluetoothLeService.ACTION_GATT_CONNECTED.equals(action)) {
} else if (BluetoothLeService.ACTION_GATT_DISCONNECTED.equals(action)) {
} else if (BluetoothLeService.ACTION_GATT_SERVICES_DISCOVERED.equals(action)) {
// Show all the supported services and characteristics on the user interface.
mBluetoothLeService.getbattery();
} else if (BluetoothLeService.ACTION_DATA_AVAILABLE.equals(action)) {
batteryLevels.add(Double.valueOf(intent.getStringExtra(BluetoothLeService.EXTRAS_DEVICE_BATTERY)));
}
}
};
private static IntentFilter makeGattUpdateIntentFilter() {
final IntentFilter intentFilter = new IntentFilter();
intentFilter.addAction(BluetoothLeService.ACTION_GATT_CONNECTED);
intentFilter.addAction(BluetoothLeService.ACTION_GATT_DISCONNECTED);
intentFilter.addAction(BluetoothLeService.ACTION_GATT_SERVICES_DISCOVERED);
intentFilter.addAction(BluetoothLeService.ACTION_DATA_AVAILABLE);
return intentFilter;
}
我的BluetoothLeService类
import android.app.Service;
import android.bluetooth.BluetoothAdapter;
import android.bluetooth.BluetoothDevice;
import android.bluetooth.BluetoothGatt;
import android.bluetooth.BluetoothGattCallback;
import android.bluetooth.BluetoothGattCharacteristic;
import android.bluetooth.BluetoothGattDescriptor;
import android.bluetooth.BluetoothGattService;
import android.bluetooth.BluetoothManager;
import android.bluetooth.BluetoothProfile;
import android.content.Context;
import android.content.Intent;
import android.os.Binder;
import android.os.IBinder;
import android.util.Log;
import java.util.Iterator;
import java.util.List;
import java.util.Set;
import java.util.UUID;
/**
* Service for managing connection and data communication with a GATT server hosted on a
* given Bluetooth LE device.
*/
public class BluetoothLeService extends Service {
private final static String TAG = BluetoothLeService.class.getSimpleName();
private BluetoothManager mBluetoothManager;
private BluetoothAdapter mBluetoothAdapter;
private String mBluetoothDeviceAddress;
private BluetoothGatt mBluetoothGatt;
private int mConnectionState = STATE_DISCONNECTED;
private static final int STATE_DISCONNECTED = 0;
private static final int STATE_CONNECTING = 1;
private static final int STATE_CONNECTED = 2;
public final static String ACTION_GATT_CONNECTED =
"com.example.bluetooth.le.ACTION_GATT_CONNECTED";
public final static String ACTION_GATT_DISCONNECTED =
"com.example.bluetooth.le.ACTION_GATT_DISCONNECTED";
public final static String ACTION_GATT_SERVICES_DISCOVERED =
"com.example.bluetooth.le.ACTION_GATT_SERVICES_DISCOVERED";
public final static String ACTION_DATA_AVAILABLE =
"com.example.bluetooth.le.ACTION_DATA_AVAILABLE";
public final static String EXTRA_DATA =
"com.example.bluetooth.le.EXTRA_DATA";
public final static String EXTRAS_DEVICE_BATTERY = "EXTRAS_DEVICE_BATTERY";
public final static UUID UUID_HEART_RATE_MEASUREMENT =
UUID.fromString(SampleGattAttributes.HEART_RATE_MEASUREMENT);
private static final UUID Battery_Service_UUID = UUID.fromString("0000180F-0000-1000-8000-00805f9b34fb");
private static final UUID Battery_Level_UUID = UUID.fromString("00002a19-0000-1000-8000-00805f9b34fb");
// Implements callback methods for GATT events that the app cares about. For example,
// connection change and services discovered.
private final BluetoothGattCallback mGattCallback = new BluetoothGattCallback() {
@Override
public void onConnectionStateChange(BluetoothGatt gatt, int status, int newState) {
String intentAction;
if (newState == BluetoothProfile.STATE_CONNECTED) {
intentAction = ACTION_GATT_CONNECTED;
mConnectionState = STATE_CONNECTED;
broadcastUpdate(intentAction);
Log.i(TAG, "Connected to GATT server.");
// Attempts to discover services after successful connection.
Log.i(TAG, "Attempting to start service discovery:" +
mBluetoothGatt.discoverServices());
} else if (newState == BluetoothProfile.STATE_DISCONNECTED) {
intentAction = ACTION_GATT_DISCONNECTED;
mConnectionState = STATE_DISCONNECTED;
Log.i(TAG, "Disconnected from GATT server.");
broadcastUpdate(intentAction);
}
}
@Override
public void onServicesDiscovered(BluetoothGatt gatt, int status) {
if (status == BluetoothGatt.GATT_SUCCESS) {
broadcastUpdate(ACTION_GATT_SERVICES_DISCOVERED);
} else {
Log.w(TAG, "onServicesDiscovered received: " + status);
}
}
@Override
public void onCharacteristicRead(BluetoothGatt gatt,
BluetoothGattCharacteristic characteristic,
int status) {
if (status == BluetoothGatt.GATT_SUCCESS) {
broadcastUpdate(ACTION_DATA_AVAILABLE, characteristic);
}
}
@Override
public void onCharacteristicChanged(BluetoothGatt gatt,
BluetoothGattCharacteristic characteristic) {
broadcastUpdate(ACTION_DATA_AVAILABLE, characteristic);
}
};
private void broadcastUpdate(final String action) {
final Intent intent = new Intent(action);
sendBroadcast(intent);
}
private void broadcastUpdate(final String action,
final BluetoothGattCharacteristic characteristic) {
final Intent intent = new Intent(action);
Log.v(TAG, "characteristic.getStringValue(0) = " + characteristic.getIntValue(BluetoothGattCharacteristic.FORMAT_UINT8, 0));
intent.putExtra(EXTRAS_DEVICE_BATTERY, characteristic.getIntValue(BluetoothGattCharacteristic.FORMAT_UINT8, 0));
sendBroadcast(intent);
}
public class LocalBinder extends Binder {
BluetoothLeService getService() {
return BluetoothLeService.this;
}
}
public void getbattery() {
Set pairedDevices = mBluetoothAdapter.getBondedDevices();
BluetoothGattService batteryService = mBluetoothGatt.getService(Battery_Service_UUID);
List<BluetoothGattService> servicesList;
servicesList = getSupportedGattServices();
Iterator<BluetoothGattService> iter = servicesList.iterator();
while (iter.hasNext()) {
BluetoothGattService bService = (BluetoothGattService) iter.next();
if (bService.getUuid().toString().equals(Battery_Level_UUID)){
batteryService = bService;
}
}
if(batteryService == null) {
Log.d(TAG, "Battery service not found!");
return;
}
BluetoothGattCharacteristic batteryLevel = batteryService.getCharacteristic(Battery_Level_UUID);
if(batteryLevel == null) {
Log.d(TAG, "Battery level not found!");
return;
}
mBluetoothGatt.readCharacteristic(batteryLevel);
Log.v(TAG, "batteryLevel = " + mBluetoothGatt.readCharacteristic(batteryLevel));
}
@Override
public IBinder onBind(Intent intent) {
return mBinder;
}
@Override
public boolean onUnbind(Intent intent) {
// After using a given device, you should make sure that BluetoothGatt.close() is called
// such that resources are cleaned up properly. In this particular example, close() is
// invoked when the UI is disconnected from the Service.
close();
return super.onUnbind(intent);
}
private final IBinder mBinder = new LocalBinder();
/**
* Initializes a reference to the local Bluetooth adapter.
*
* @return Return true if the initialization is successful.
*/
public boolean initialize() {
// For API level 18 and above, get a reference to BluetoothAdapter through
// BluetoothManager.
if (mBluetoothManager == null) {
mBluetoothManager = (BluetoothManager) getSystemService(Context.BLUETOOTH_SERVICE);
if (mBluetoothManager == null) {
Log.e(TAG, "Unable to initialize BluetoothManager.");
return false;
}
}
mBluetoothAdapter = mBluetoothManager.getAdapter();
if (mBluetoothAdapter == null) {
Log.e(TAG, "Unable to obtain a BluetoothAdapter.");
return false;
}
return true;
}
/**
* Connects to the GATT server hosted on the Bluetooth LE device.
*
* @param address The device address of the destination device.
*
* @return Return true if the connection is initiated successfully. The connection result
* is reported asynchronously through the
* {@code BluetoothGattCallback#onConnectionStateChange(android.bluetooth.BluetoothGatt, int, int)}
* callback.
*/
public boolean connect(final String address) {
if (mBluetoothAdapter == null || address == null) {
Log.w(TAG, "BluetoothAdapter not initialized or unspecified address.");
return false;
}
// Previously connected device. Try to reconnect.
if (mBluetoothDeviceAddress != null && address.equals(mBluetoothDeviceAddress)
&& mBluetoothGatt != null) {
Log.d(TAG, "Trying to use an existing mBluetoothGatt for connection.");
if (mBluetoothGatt.connect()) {
mConnectionState = STATE_CONNECTING;
return true;
} else {
return false;
}
}
final BluetoothDevice device = mBluetoothAdapter.getRemoteDevice(address);
if (device == null) {
Log.w(TAG, "Device not found. Unable to connect.");
return false;
}
// We want to directly connect to the device, so we are setting the autoConnect
// parameter to false.
mBluetoothGatt = device.connectGatt(this, false, mGattCallback);
Log.d(TAG, "Trying to create a new connection.");
mBluetoothDeviceAddress = address;
mConnectionState = STATE_CONNECTING;
return true;
}
/**
* Disconnects an existing connection or cancel a pending connection. The disconnection result
* is reported asynchronously through the
* {@code BluetoothGattCallback#onConnectionStateChange(android.bluetooth.BluetoothGatt, int, int)}
* callback.
*/
public void disconnect() {
if (mBluetoothAdapter == null || mBluetoothGatt == null) {
Log.w(TAG, "BluetoothAdapter not initialized");
return;
}
mBluetoothGatt.close();
}
/**
* After using a given BLE device, the app must call this method to ensure resources are
* released properly.
*/
public void close() {
if (mBluetoothGatt == null) {
return;
}
mBluetoothGatt.close();
mBluetoothGatt = null;
}
/**
* Request a read on a given {@code BluetoothGattCharacteristic}. The read result is reported
* asynchronously through the {@code BluetoothGattCallback#onCharacteristicRead(android.bluetooth.BluetoothGatt, android.bluetooth.BluetoothGattCharacteristic, int)}
* callback.
*
* @param characteristic The characteristic to read from.
*/
public void readCharacteristic(BluetoothGattCharacteristic characteristic) {
if (mBluetoothAdapter == null || mBluetoothGatt == null) {
Log.w(TAG, "BluetoothAdapter not initialized");
return;
}
mBluetoothGatt.readCharacteristic(characteristic);
}
public void onCharacteristicRead(BluetoothGatt gatt, BluetoothGattCharacteristic characteristic, int status) {
if(status == BluetoothGatt.GATT_SUCCESS) {
broadcastUpdate(ACTION_DATA_AVAILABLE, characteristic);
}
}
/**
* Enables or disables notification on a give characteristic.
*
* @param characteristic Characteristic to act on.
* @param enabled If true, enable notification. False otherwise.*/
public void setCharacteristicNotification(BluetoothGattCharacteristic characteristic,
boolean enabled) {
if (mBluetoothAdapter == null || mBluetoothGatt == null) {
Log.w(TAG, "BluetoothAdapter not initialized");
return;
}
mBluetoothGatt.setCharacteristicNotification(characteristic, enabled);
// This is specific to Heart Rate Measurement.
if (UUID_HEART_RATE_MEASUREMENT.equals(characteristic.getUuid())) {
BluetoothGattDescriptor descriptor = characteristic.getDescriptor(
UUID.fromString(SampleGattAttributes.CLIENT_CHARACTERISTIC_CONFIG));
descriptor.setValue(BluetoothGattDescriptor.ENABLE_NOTIFICATION_VALUE);
mBluetoothGatt.writeDescriptor(descriptor);
}
if (Battery_Level_UUID.equals(characteristic.getUuid())) {
BluetoothGattDescriptor descriptor = characteristic.getDescriptor(
UUID.fromString(SampleGattAttributes.CLIENT_CHARACTERISTIC_CONFIG));
descriptor.setValue(BluetoothGattDescriptor.ENABLE_NOTIFICATION_VALUE);
mBluetoothGatt.writeDescriptor(descriptor);
}
}
/**
* Retrieves a list of supported GATT services on the connected device. This should be
* invoked only after {@code BluetoothGatt#discoverServices()} completes successfully.
*
* @return A {@code List} of supported services.
*/
public List<BluetoothGattService> getSupportedGattServices() {
if (mBluetoothGatt == null) return null;
return mBluetoothGatt.getServices();
}
}
最佳答案
我想通了。真正的问题是连接。显示已连接但未连接,我尝试使用错误地址连接但仍然连接。
我添加后
mBluetoothGatt.connect();
在 BluetoothLeService.java 的连接方法结束时,它开始工作。
感谢 Vikram Ezhil 的帮助
关于android - onServicesDiscovered(BluetoothGatt gatt, int status) 永远不会被调用,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/25848764/
有人可以解释预定义谓词forall如何在列表中找到最小值吗? 最佳答案 对于列表L,您可以使用: member(Min,L), forall(member(N,L), N>=Min). 但是,尽管这是
编辑:澄清一下,我正在搜索的对象数组确实已按搜索变量的字母数字顺序进行了预排序。 我做了一个二分搜索函数并将它嵌套在另一个函数中。出于某种原因,每次我使用二进制搜索都无法找到相关的字符数组。 基本上,
是否可以阻止用户(甚至是管理员)终止我的程序? 或者万一被杀死,它会迅速恢复自身? 更新:澄清一下:我正在编写一个监控程序,类似于家长控制,它记录用户对 PC 的操作。你可以通过查看我最近的其他问题来
我有一个 for 循环,我希望它永远递增。 我的代码: for a in (0...Float::INFINITY).step(2) puts a end 输出: 0.0 2.0 4.0 Et
我很困惑。我有一个运行Ubuntu 14.04的VM。我在这里遵循了以下程序:http://clang.llvm.org/docs/LibASTMatchersTutorial.html,现在正在运行
这是我的代码 #include #include #include #include #include #include #include #include #include usi
我有一个程序会或多或少地通过标准输入使用 COPY FROM 将大量数据复制到 Postgres 9 中。 这目前工作正常,但我正在缓冲数据 block ,然后分批运行 COPY FROM 操作。 我
我想我不小心在某个地方安装了 Foreverjs 并启动了它。每次我杀死这个进程时,另一个进程就会取代它的位置 ] 1 我不知道永远在哪里(或者这实际上是导致它的原因),因为我在本地安装了它。 最佳答
我得到了一个 forever: command not found 当我使用 forever 命令作为 cronjob 运行 nodejs 进程时出现错误(在亚马逊 ec2 机器中):我正在使用的 b
我创建了一些容器,它们还没有准备好使用,总是“重新启动”状态: docker ps CONTAINER ID IMAGE COMMAND
我试图永远重复一个 IO 操作,但是将一个执行的结果输入到下一个执行中。像这样的东西: -- poorly named iterateM :: Monad m => (a -> m a) -> a -
这里的代码样式问题。 我看着this问题,它询问.NET CLR是否真的总是初始化字段值。 (答案是肯定的。)但令我感到惊讶的是,我不确定执行此操作始终是个好主意。我的想法是,如果我看到这样的声明:
美好的一天,我对永久启动\停止脚本有一些问题。 中央操作系统 6.2 内核 2.6.32-220.el6.x86_64 node.js v0.6.19 npm v 1.1.24 永远@0.9.2 我创
我在让管道与 paramiko 一起工作时遇到问题。 这个有效: ssh = paramiko.SSHClient() [...] stdin, stdout, stderr = ssh.exec_c
我希望守护我的 Node.js 应用程序。 Upstart 和永远有什么区别?另外,还有其他我可能想要考虑的软件包吗? 最佳答案 正如评论中指出的,upstart将用于启动 forever脚本,因为
我有以下查询,其中包含在 5 秒内返回数据的选择查询。但是当我在前面添加创建物化 View 命令时,查询需要创建物化 View 。 最佳答案 当您创建物化 View 时,实际上是创建了 Oracle
当我今天访问我的项目的 Google Cloud 控制台并单击“计算引擎”或“云存储”时,它只会永远显示“正在加载”。几天前,我能够看到我的虚拟机和存储桶。有没有办法让控制台再次工作? 谢谢, 麦克风
我编写了一个函数,它当前显示 1000 以下的所有质数。 我可以继续增大 1000 以生成更多数字,但我不知道如何让它在运行后一直持续下去。 func generatePrimes() { l
这是由 another question 触发的. 具体来说,我有一个进程中的 COM 类,它在 CLSID registry 中定义。因为有 ThreadingModel of Both . 我们的
我正在试用新的 React Hooks的 useEffect API,它似乎永远在无限循环中运行!我只希望 useEffect 中的回调运行一次。这是我的引用代码: 单击“运行代码片段”以查看“运行
我是一名优秀的程序员,十分优秀!