python - 在 debian 中守护 python 脚本

Question

我有一个 python 脚本，我想在启动时在后台运行。这是脚本:

#!/usr/bin/python
from Adafruit_CharLCD import Adafruit_CharLCD
from subprocess import * 
from time import sleep, strftime
from datetime import datetime
from datetime import timedelta
from os import system
from os import getloadavg
from glob import glob

#Variables
lcd = Adafruit_CharLCD() #Stores LCD object
cmdIP = "ip addr show eth0 | grep inet | awk '{print $2}' | cut -d/ -f1" #Current IP
cmdHD = "df -h / | awk '{print $5}'" # Available hd space
cmdSD = "df -h /dev/sda1 | awk '{print $5}'" # Available sd space
cmdRam = "free -h"
temp = 0

#Run shell command
def run_cmd(cmd):
    p = Popen(cmd, shell=True, stdout=PIPE)
    output = p.communicate()[0]
    return output

#Initalises temp device     
def initialise_temp():
    #Initialise
    system("sudo modprobe w1-gpio")
    system("sudo modprobe w1-therm")
    #Find device
    devicedir = glob("/sys/bus/w1/devices/28-*")
    device = devicedir[0]+"/w1_slave"
    return device

#Gets temp  
def get_temp(device):
    f = open (device, 'r')
    sensor = f.readlines()
    f.close()

    #parse results from the file
    crc=sensor[0].split()[-1]
    temp=float(sensor[1].split()[-1].strip('t='))
    temp_C=(temp/1000.000)
    temp_F = ( temp_C * 9.0 / 5.0 ) + 32

    #output
    return temp_C

#Gets time
def get_time():
    return datetime.now().strftime('%b %d  %H:%M:%S\n')

#Gets uptime
def get_uptime():
    with open('/proc/uptime', 'r') as f:
        seconds = float(f.readline().split()[0])
        array = str(timedelta(seconds = seconds)).split('.')
        string = array[0].split(' ')
        totalString = string[0] + ":" + string[2]
    return totalString

#Gets average load
def get_load():
    array = getloadavg()
    average = 0
    for i in array:
        average += i
    average = average / 3
    average = average * 100
    average = "%.2f" % average
    return str(average + "%")

#def get_ram():
def get_ram():
    ram = run_cmd(cmdRam)
    strippedRam = ram.replace("\n"," ");
    splitRam = strippedRam.split(' ')
    totalRam = int(splitRam[52].rstrip("M"))
    usedRam = int(splitRam[59].rstrip("M"))
    percentage = "%.2f" % ((float(usedRam) / float(totalRam)) * 100)
    return percentage + "%"

#Gets the SD usage
def get_sd():
    sd = run_cmd(cmdSD)
    strippedSD = sd.lstrip("Use%\n")
    return strippedSD

#Gets the HD usage
def get_hd():
    hd = run_cmd(cmdSD)
    strippedHD = hd.lstrip("Use%\n")
    return strippedHD

def scroll():
    while(1):
        lcd.scrollDisplayLeft()
        sleep(0.5)

#Uptime and IP
def screen1():
    uptime = get_uptime()
    lcd.message('Uptime %s\n' % (uptime))
    ipaddr = run_cmd(cmdIP)
    lcd.message('IP %s' % (ipaddr))

#Ram and load
def screen2():
    ram = get_ram()
    lcd.message('Ram Used %s\n' % (ram))
    load = get_load()
    lcd.message('Avg Load %s' % (load))

#Temp and time
def screen3():
    time = get_time();
    lcd.message('%s\n' % (time))
    lcd.message('Temp %s' % (temp))

#HD and SD usage
def screen4():
    sd = get_sd()
    lcd.message('SD Used %s\n' % (sd))
    hd = get_hd()
    lcd.message('HD Used %s' % (hd))

#Pause and clear
def screenPause(time):
    sleep(time)
    #In here to reduce lag
    global temp
    temp = str(get_temp(device));
    lcd.clear()
###########################################################################################################

#Initialise
lcd.begin(16,2)
device = initialise_temp()
lcd.clear()

#Testing

#Main loop
while(1):
    screen1()
    screenPause(5)
    screen2()
    screenPause(5)
    screen3()
    screenPause(5)
    screen4()
    screenPause(5)

我知道我可能还没有用写的方式做事，但这是第一次尝试。我的启动脚本在/etc/init.d中，这是脚本:

#! /bin/sh
### BEGIN INIT INFO
# Provides:          LCD looping
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: LCD daemon
# Description:       This file should be used to construct scripts to be
#                    placed in /etc/init.d.
### END INIT INFO

# Author: Foo Bar <foobar@baz.org>
#
# Please remove the "Author" lines above and replace them
# with your own name if you copy and modify this script.

# Do NOT "set -e"

# PATH should only include /usr/* if it runs after the mountnfs.sh script
PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC="Loops the LCD screen through LCD.py"
NAME=startup.py
DAEMON=/home/pi/Programming/LCD/startup.py
DAEMON_ARGS=""
PIDFILE=/var/run/daemonLCD.pid
SCRIPTNAME=/etc/init.d/daemonLCD

# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0

# Read configuration variable file if it is present
[ -r /etc/default/daemonLCD ] && . /etc/default/daemonLCD

# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
# and status_of_proc is working.
. /lib/lsb/init-functions

#
# Function that starts the daemon/service
#
do_start()
{
        # Return
        #   0 if daemon has been started
        #   1 if daemon was already running
        #   2 if daemon could not be started
        start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
                || return 1
        start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
                $DAEMON_ARGS \
                || return 2
        # Add code here, if necessary, that waits for the process to be ready
        # to handle requests from services started subsequently which depend
        # on this one.  As a last resort, sleep for some time.
}

#
# Function that stops the daemon/service
#
do_stop()
{
        # Return
        #   0 if daemon has been stopped
        #   1 if daemon was already stopped
        #   2 if daemon could not be stopped
        #   other if a failure occurred
        start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
        RETVAL="$?"
        [ "$RETVAL" = 2 ] && return 2
        # Wait for children to finish too if this is a daemon that forks
        # and if the daemon is only ever run from this initscript.
        # If the above conditions are not satisfied then add some other code
        # that waits for the process to drop all resources that could be
        # needed by services started subsequently.  A last resort is to
        # sleep for some time.
        start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
        [ "$?" = 2 ] && return 2
        # Many daemons don't delete their pidfiles when they exit.
        rm -f $PIDFILE
        return "$RETVAL"
#
# Function that sends a SIGHUP to the daemon/service
#
do_reload() {
        #
        # If the daemon can reload its configuration without
        # restarting (for example, when it is sent a SIGHUP),
        # then implement that here.
        #
        start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
        return 0
}

case "$1" in
  start)
        [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
        do_start
        case "$?" in
                0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
                2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
        esac
        ;;
  stop)
        [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
        do_stop
        case "$?" in
                0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
                2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
        esac
        ;;
  status)
        status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
        ;;
  #reload|force-reload)
        #
        # If do_reload() is not implemented then leave this commented out
        # and leave 'force-reload' as an alias for 'restart'.
        #
        #log_daemon_msg "Reloading $DESC" "$NAME"
        #do_reload
        #log_end_msg $?
        #;;

  restart|force-reload)
        #
        # If the "reload" option is implemented then remove the
        # 'force-reload' alias
        #
        log_daemon_msg "Restarting $DESC" "$NAME"
        do_stop
        case "$?" in
          0|1)
                do_start
                case "$?" in
                        0) log_end_msg 0 ;;
                        1) log_end_msg 1 ;; # Old process is still running
                        *) log_end_msg 1 ;; # Failed to start
                esac
                ;;
          *)
                # Failed to stop
                log_end_msg 1
                ;;
        esac
        ;;
  *)
        #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
        echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
        exit 3
        ;;
esac

:

我想我错过了一些东西，因为当我键入 daemonLCD start 时它说找不到命令。任何输入都会很棒。

谢谢

Answer 1

假设你以后可能要管理多个守护进程，我推荐Supervisord .这比编写和管理您自己的 init.d 脚本要简单得多。

例如，启动您的脚本就像将其包含在 conf 中一样简单:

[program:myscript]
command=/usr/bin/python /path/to/myscript.py

我使用 init.d 脚本 available here .将其重命名为 supervisord 并将其复制到您的/etc/init.d/然后运行:

sudo update-rc.d supervisord defaults

我相信 init 脚本默认以 root 身份运行 supervisord。如果你愿意，你可以让它作为另一个用户运行。我不知道 child 是否以 root 身份运行，尽管我假设不会。继续检查，但如果他们不这样做，您可以在调用脚本的 supervisord.conf 中的 python 命令之前添加一个 sudo。

它不运行，(或者如果你希望 supervisord 以非 root 身份运行但仍然希望你的脚本以 root 身份运行)你可以允许任何人(或一组用户)以 python 脚本运行root(尽管你应该确定这个脚本不能被 root 以外的任何人编辑)。

使用“sudo visudo”编辑您的 sudoers 文件，并将以下内容添加到末尾:

USERS ALL=(ALL) NOPASSWD: /path/to/myscript.py

然后确保在 python 脚本的开头有一个 shebang，并更改命令以省略 python 调用，即:

[program:myscript]
command=sudo /path/to/myscript.py