- iOS/Objective-C 元类和类别
- objective-c - -1001 错误,当 NSURLSession 通过 httpproxy 和/etc/hosts
- java - 使用网络类获取 url 地址
- ios - 推送通知中不播放声音
array(7) { [0]=> string(1) "-6ren">
我有一个数组,需要使用“odbyx”的键值进行排序
这是数组var_dump
array(12) {
["id"]=> array(7) {
[0]=> string(1) "8"
[1]=> string(1) "7"
[2]=> string(1) "3"
[3]=> string(1) "6"
[4]=> string(1) "5"
[5]=> string(1) "2"
[6]=> string(1) "1"
}
["subject"]=> array(7) {
[0]=> string(14) "ticke tick sbj"
[1]=> string(13) "new tick test"
[2]=> string(15) "fdsfdsfdsfdsfds"
[3]=> string(12) "test subject"
[4]=> string(4) "test"
[5]=> string(4) "test"
[6]=> string(12) "test subject"
}
["msg"]=> array(7) {
[0]=> string(9) "test+tick"
[1]=> string(4) "test"
[2]=> string(9) "dfdsfdsfd"
[3]=> string(12) "test+tcikets"
[4]=> string(4) "test"
[5]=> string(12) "test+message"
[6]=> string(7) "tssssss"
}
["department"]=> array(7) {
[0]=> string(10) "Technician"
[1]=> string(5) "Admin"
[2]=> string(5) "Admin"
[3]=> string(10) "Technician"
[4]=> string(10) "Technician"
[5]=> string(5) "Admin"
[6]=> string(5) "Admin"
}
["priorety"]=> array(7) {
[0]=> string(3) "Low"
[1]=> string(6) "Normal"
[2]=> string(3) "Low"
[3]=> string(3) "Low"
[4]=> string(4) "High"
[5]=> string(6) "Normal"
[6]=> string(3) "Low"
}
["status"]=> array(7) {
[0]=> string(4) "open"
[1]=> string(8) "answered"
[2]=> string(8) "answered"
[3]=> string(4) "open"
[4]=> string(4) "open"
[5]=> string(4) "open"
[6]=> string(6) "closed"
}
["dateAded"]=> array(7) {
[0]=> string(19) "2017-10-01 12:34:56"
[1]=> string(19) "2017-09-27 13:41:09"
[2]=> string(19) "2017-09-17 13:53:04"
[3]=> string(19) "2017-09-25 15:00:48"
[4]=> string(19) "2017-09-23 10:41:24"
[5]=> string(19) "2017-09-17 13:31:56"
[6]=> string(19) "2017-09-17 12:37:22"
}
["dateClosed"]=> array(7) {
[0]=> string(19) "0000-00-00 00:00:00"
[1]=> string(19) "0000-00-00 00:00:00"
[2]=> string(19) "0000-00-00 00:00:00"
[3]=> string(19) "0000-00-00 00:00:00"
[4]=> string(19) "0000-00-00 00:00:00"
[5]=> string(19) "2017-09-30 13:41:09"
[6]=> string(19) "2017-09-17 13:40:53"
}
["dateActivity"]=> array(7) {
[0]=> string(19) "2017-10-01 12:34:56"
[1]=> string(19) "2017-10-01 07:49:20"
[2]=> string(19) "2017-09-26 10:35:36"
[3]=> string(19) "2017-09-25 15:00:48"
[4]=> string(19) "2017-09-23 10:41:24"
[5]=> string(19) "2017-09-17 13:41:21"
[6]=> string(19) "2017-09-17 13:40:53"
}
["userId"]=> array(7) {
[0]=> string(1) "4"
[1]=> string(1) "4"
[2]=> string(1) "3"
[3]=> string(1) "4"
[4]=> string(1) "7"
[5]=> string(1) "3"
[6]=> string(1) "2"
}
["res"]=> string(4) "true"
["odbyx"]=> array(7) {
[0]=> int(1)
[1]=> int(2)
[2]=> int(3)
[3]=> int(2)
[4]=> int(3)
[5]=> int(3)
[6]=> int(3)
}
}
数组背后的逻辑
$array = array
(
"id" => $id,
"subject" => $subject,
"msg" => $msg,
"department" => $department,
"priorety" => $priorety,
"status" => $status,
"dateAded" => $dateAded,
"dateClosed" => $dateClosed,
"dateActivity" => $dateActivity,
"userId" => $userId,
"res" => $res,
"odbyx"=>$odbyx
);
我尝试使用下面的代码进行排序,但它似乎不起作用
array_multisort(array_column($array, 'odbyx'), SORT_DESC, $array);
odbyx 字段包含优先级值 (1,2,3)。
我需要使用这些值对主数组进行排序,这样我就可以在表格的开头显示优先级最高的字段
我想使用“odbyx”降序
对 $array进行排序示例输出id数组,其他数组也需要一次排序。
["id"]=> array(7) { [0]=> string(1) "6" [1]=> string(1) "5" [2]=> string(1) "4" [3]=> string(1) "3" [4]=> string(1) "7" [5]=> string(1) "6" [6]=> string(1) "8" }
最佳答案
另请参阅:Sort Multi-dimensional Array by Value
预期结果中的第一个条目:0 => '6'
odbyx-index == id-index
odbyx
中的索引是否应该与 id
中的索引匹配?
即:$array['id'][3]
应按 $array['odbyx'][3]
排序
如果是这种情况,那么您提供的代码应该为第一个索引(odbyx 1 的优先级高于 3)产生 0 => '8'
,或者 0 => '1'
(3 更高)。
odbyx-index == id-value
odbyx
中的索引是否应该与 id
中的 id values 匹配?
即:$array['odbyx'][1]
的值决定了 $array['id'][6] = '1'
的排序
在这种情况下,结果应该是 0 => '2'
这些可能的解释都不符合您示例中的第一个结果。这里的教训是规范,即:在 stackoverflow 或其他任何地方仔细定义和描述解决问题所需的特定条件。
由于您要解决的问题很复杂,定义不明确,需要大量的编码和测试,并且对性能有重大影响,所以我会为您提供解决方案之一的花絮上面的解释。祝你好运。
Class SimpleSorter
{
private $orderBy;
private $sortMe;
public static function sortByIndexedOrderField(array $sortMe, array $byMe)
{
$sorter = new self($sortMe);
return $sorter->applyIndexedOrder($byMe);
}
public function __construct(array $sortMe)
{
$this->sortMe = $sortMe;
}
public function applyIndexedOrder(array $byMe): array
{
$this->orderBy = $byMe;
$keys = array_keys($this->sortMe);
// sort, first by odbyx, then by value
usort($keys, function($a,$b){
$odbyx = 0;
if (array_key_exists($a, $this->orderBy) && array_key_exists($b, $this->orderBy)) {
$odbyx = $this->orderBy[$b] <=> $this->orderBy[$a];
}
if (0 !== $odbyx) {
return $odbyx;
}
return $this->sortMe[$a] <=> $this->sortMe[$b];
});
// reorder by new key order
$result = [];
foreach($keys as $key) {
$result[$key] = $this->sortMe[$key];
}
return $result;
}
}
$array = [];
$array["id"] = [
0 => '8',
1 => '7',
2 => '3',
3 => '6',
4 => '5',
5 => '2',
6 => '1',
];
$array["odbyx"] = [
0 => 1,
1 => 2,
2 => 3,
3 => 2,
4 => 3,
5 => 3,
6 => 3,
];
$idsSorted = SimpleSorter::sortByIndexedOrderField($array["id"], $array["odbyx"]);
print_r($idsSorted);
关于PHP数组使用特定键值对关联数组进行排序,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/46514196/
我在网上搜索但没有找到任何合适的文章解释如何使用 javascript 使用 WCF 服务,尤其是 WebScriptEndpoint。 任何人都可以对此给出任何指导吗? 谢谢 最佳答案 这是一篇关于
我正在编写一个将运行 Linux 命令的 C 程序,例如: cat/etc/passwd | grep 列表 |剪切-c 1-5 我没有任何结果 *这里 parent 等待第一个 child (chi
所以我正在尝试处理文件上传,然后将该文件作为二进制文件存储到数据库中。在我存储它之后,我尝试在给定的 URL 上提供文件。我似乎找不到适合这里的方法。我需要使用数据库,因为我使用 Google 应用引
我正在尝试制作一个宏,将下面的公式添加到单元格中,然后将其拖到整个列中并在 H 列中复制相同的公式 我想在 F 和 H 列中输入公式的数据 Range("F1").formula = "=IF(ISE
问题类似于this one ,但我想使用 OperatorPrecedenceParser 解析带有函数应用程序的表达式在 FParsec . 这是我的 AST: type Expression =
我想通过使用 sequelize 和 node.js 将这个查询更改为代码取决于在哪里 select COUNT(gender) as genderCount from customers where
我正在使用GNU bash,版本5.0.3(1)-发行版(x86_64-pc-linux-gnu),我想知道为什么简单的赋值语句会出现语法错误: #/bin/bash var1=/tmp
这里,为什么我的代码在 IE 中不起作用。我的代码适用于所有浏览器。没有问题。但是当我在 IE 上运行我的项目时,它发现错误。 而且我的 jquery 类和 insertadjacentHTMl 也不
我正在尝试更改标签的innerHTML。我无权访问该表单,因此无法编辑 HTML。标签具有的唯一标识符是“for”属性。 这是输入和标签的结构:
我有一个页面,我可以在其中返回用户帖子,可以使用一些 jquery 代码对这些帖子进行即时评论,在发布新评论后,我在帖子下插入新评论以及删除 按钮。问题是 Delete 按钮在新插入的元素上不起作用,
我有一个大约有 20 列的“管道分隔”文件。我只想使用 sha1sum 散列第一列,它是一个数字,如帐号,并按原样返回其余列。 使用 awk 或 sed 执行此操作的最佳方法是什么? Accounti
我需要将以下内容插入到我的表中...我的用户表有五列 id、用户名、密码、名称、条目。 (我还没有提交任何东西到条目中,我稍后会使用 php 来做)但由于某种原因我不断收到这个错误:#1054 - U
所以我试图有一个输入字段,我可以在其中输入任何字符,但然后将输入的值小写,删除任何非字母数字字符,留下“。”而不是空格。 例如,如果我输入: 地球的 70% 是水,-!*#$^^ & 30% 土地 输
我正在尝试做一些我认为非常简单的事情,但出于某种原因我没有得到想要的结果?我是 javascript 的新手,但对 java 有经验,所以我相信我没有使用某种正确的规则。 这是一个获取输入值、检查选择
我想使用 angularjs 从 mysql 数据库加载数据。 这就是应用程序的工作原理;用户登录,他们的用户名存储在 cookie 中。该用户名显示在主页上 我想获取这个值并通过 angularjs
我正在使用 autoLayout,我想在 UITableViewCell 上放置一个 UIlabel,它应该始终位于单元格的右侧和右侧的中心。 这就是我想要实现的目标 所以在这里你可以看到我正在谈论的
我需要与 MySql 等效的 elasticsearch 查询。我的 sql 查询: SELECT DISTINCT t.product_id AS id FROM tbl_sup_price t
我正在实现代码以使用 JSON。 func setup() { if let flickrURL = NSURL(string: "https://api.flickr.com/
我尝试使用for循环声明变量,然后测试cols和rols是否相同。如果是,它将运行递归函数。但是,我在 javascript 中执行 do 时遇到问题。有人可以帮忙吗? 现在,在比较 col.1 和
我举了一个我正在处理的问题的简短示例。 HTML代码: 1 2 3 CSS 代码: .BB a:hover{ color: #000; } .BB > li:after {
我是一名优秀的程序员,十分优秀!