- iOS/Objective-C 元类和类别
- objective-c - -1001 错误,当 NSURLSession 通过 httpproxy 和/etc/hosts
- java - 使用网络类获取 url 地址
- ios - 推送通知中不播放声音
<分区>
老实说,我不认为我的代码那么糟糕....这是我提出的第五个版本,我认为它是迄今为止最好的......但是当我运行测试时foo.bar 控制台显示“超出时间限制”
你看到我可以加快速度的方法了吗?我现在不知所措......
这是自述文件:
Queue To Do
You're almost ready to make your move to destroy the LAMBCHOP doomsday device, but the security checkpoints that guard the underlying systems of the LAMBCHOP are going to be a problem. You were able to take one down without tripping any alarms, which is great! Except that as Commander Lambda's assistant, you've learned that the checkpoints are about to come under automated review, which means that your sabotage will be discovered and your cover blown - unless you can trick the automated review system.
To trick the system, you'll need to write a program to return the same security checksum that the guards would have after they would have checked all the workers through. Fortunately, Commander Lambda's desire for efficiency won't allow for hours-long lines, so the checkpoint guards have found ways to quicken the pass-through rate. Instead of checking each and every worker coming through, the guards instead go over everyone in line while noting their security IDs, then allow the line to fill back up. Once they've done that they go over the line again, this time leaving off the last worker. They continue doing this, leaving off one more worker from the line each time but recording the security IDs of those they do check, until they skip the entire line, at which point they XOR the IDs of all the workers they noted into a checksum and then take off for lunch. Fortunately, the workers' orderly nature causes them to always line up in numerical order without any gaps.
For example, if the first worker in line has ID 0 and the security checkpoint line holds three workers, the process would look like this: 0 1 2 / 3 4 / 5 6 / 7 8 where the guards' XOR (^) checksum is 0^1^2^3^4^6 == 2.
Likewise, if the first worker has ID 17 and the checkpoint holds four workers, the process would look like: 17 18 19 20 / 21 22 23 / 24 25 26 / 27 28 29 / 30 31 32 which produces the checksum 17^18^19^20^21^22^23^25^26^29 == 14.
All worker IDs (including the first worker) are between 0 and 2000000000 inclusive, and the checkpoint line will always be at least 1 worker long.
With this information, write a function answer(start, length) that will cover for the missing security checkpoint by outputting the same checksum the guards would normally submit before lunch. You have just enough time to find out the ID of the first worker to be checked (start) and the length of the line (length) before the automatic review occurs, so your program must generate the proper checksum with just those two values.
Languages
To provide a Python solution, edit solution.py To provide a Java solution, edit solution.java
Test cases
Inputs: (int) start = 0 (int) length = 3 Output: (int) 2
Inputs: (int) start = 17 (int) length = 4 Output: (int) 14
Use verify [file] to test your solution and see how it does. When you are finished editing your code, use submit [file] to submit your answer. If your solution passes the test cases, it will be removed from your home folder.
我的解决方案:
def answer(start, length):
f = 0
r = 0
while f < length:
for i in range(start, (start+length) - f):
r ^= i
f += 1
start = range(start, start+length)[-1] + 1
return r
Android 项目中最低(最低 sdk)和最高(目标 sdk)级别是否有任何影响。这些东西是否会影响项目的可靠性和效率。 最佳答案 没有影响,如果您以 SDK 级别 8 为目标,那么您的应用将以 9
我将现有的 android 项目升级到 API 级别 31。我使用 Java 作为语言。我改变了 build.gradle compileSdkVersion 31 defaultConfig {
我正在使用 ionic 3 创建一个 android 应用程序,当我尝试上传到 playstore 时,我收到一个错误,提示我的应用程序以 api 25 为目标,当我检查我的 project.prop
我刚刚尝试将应用程序的目标和编译 API 级别更新为 29 (Android 10),并注意到我无法再编译,因为 LocationManager.addNmeaListener 只接受 OnNmeaM
我的代码没有在 Kitkat 上显示工具栏。 这是我的两个 Android 版本的屏幕截图。 Kitkat 版本: Lollipop 版: 这背后的原因可能是什么。 list 文件
我正在构建面向 API 级别 8 的 AccessabilityService,但我想使用 API 级别 18 中引入的功能 (getViewIdResourceName())。这应该可以通过使用 A
当我想在我的电脑上创建一个 android 虚拟机时,有两个选项可以选择目标设备。它们都用于相同的 API 级别。那么我应该选择哪一个呢?它们之间有什么区别? 最佳答案 一个是基本的 Android,
当我选择 tagret 作为 Android 4.2.2(API 级别 17)时,模拟器需要很长时间来加载和启动。 所以我研究它并通过使用 找到了解决方案Intel Atom(x86) 而不是 ARM
我有一个使用 Android Studio 创建的 Android 项目。我在项目中添加了一些第三方依赖项,但是当我尝试在 Android Studio 中编译时,我遇到了以下错误: Error:Ex
如上所述,如何使用 API 8 获取移动设备网络接口(interface)地址? 最佳答案 NetworkInterface.getInetAddresses() 在 API8 中可用。 关于andr
我想显示 Snackbar并使用图像而不是文本进行操作。 我使用以下代码: val imageSpan = ImageSpan(this, R.drawable.star) val b
我有一个用 python 编写的简单命令行程序。程序使用按以下方式配置的日志记录模块将日志记录到屏幕: logging.basicConfig(level=logging.INFO, format='
使用下面的代码,实现游戏状态以控制关卡的最简单和最简单的方法是什么?如果我想从标题画面开始,然后加载一个关卡,并在完成后进入下一个关卡?如果有人能解释处理这个问题的最简单方法,那就太好了! impor
我想创建一个可以找到嵌套树结构深度的属性。下面的静态通过递归找出深度/级别。但是是否可以将此函数作为同一个类中的属性而不是静态方法? public static int GetDepth(MenuGr
var myArray = [{ title: "Title 1", children: [{ title: "Title 1.1", children: [{
通过下面的代码,实现游戏状态来控制关卡的最简单、最容易的方法是什么?如果我想从标题屏幕开始,然后加载一个关卡,并在完成后进入下一个关卡?如果有人可以解释处理这个问题的最简单方法,那就太好了! impo
我有一个树结构,其中每个节点基本上可以有无限个子节点,它正在为博客的评论建模。 根据特定评论的 ID,我试图找出该评论在树中的深度/级别。 我正在关注 this guide that explains
考虑任何给定的唯一整数的数组,例如[1,3,2,4,6,5] 如何确定“排序度”的级别,范围从 0.0 到 1.0 ? 最佳答案 一种方法是评估必须移动以使其排序的项目数量,然后将其除以项目总数。 作
我如何定义一个模板类,它提供一个整数常量,表示作为输入模板参数提供的(指针)类型的“深度”?例如,如果类名为 Depth,则以下内容为真: Depth::value == 3 Depth::value
我的场景是:文件接收器应该包含所有内容。另一个接收器应包含信息消息,但需要注意的是 Microsoft.* 消息很烦人,因此这些消息应仅限于警告。两个sink怎么单独配置?我尝试的第一件事是: str
我是一名优秀的程序员,十分优秀!