- iOS/Objective-C 元类和类别
- objective-c - -1001 错误,当 NSURLSession 通过 httpproxy 和/etc/hosts
- java - 使用网络类获取 url 地址
- ios - 推送通知中不播放声音
我正在使用 php-fpm 和 nginx。一切安好。但是站点在一天中停止了很多时间。我试过更改配置文件中的子进程数。但没有运气。
当我尝试在控制台中运行“top”命令时,我看到有很多 php fpm 进程。那么就只剩下重启 fpm 的解决方案了。这对我的网站声誉非常不利。谁能帮我弄清楚我这边出了什么问题。
这是我的 www.conf 文件
; Start a new pool named 'www'.
[www]
; The address on which to accept FastCGI requests.
; Valid syntaxes are:
; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
; a specific port;
; 'port' - to listen on a TCP socket to all addresses on a
; specific port;
; '/path/to/unix/socket' - to listen on a unix socket.
; Note: This value is mandatory.
listen = 127.0.0.1:9000
; Set listen(2) backlog. A value of '-1' means unlimited.
; Default Value: -1
;listen.backlog = -1
; List of ipv4 addresses of FastCGI clients which are allowed to connect.
; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
; must be separated by a comma. If this value is left blank, connections will be
; accepted from any ip address.
; Default Value: any
listen.allowed_clients = 127.0.0.1
; Set permissions for unix socket, if one is used. In Linux, read/write
; permissions must be set in order to allow connections from a web server. Many
; BSD-derived systems allow connections regardless of permissions.
; Default Values: user and group are set as the running user
; mode is set to 0666
;listen.owner = nobody
;listen.group = nobody
;listen.mode = 0666
; Unix user/group of processes
; Note: The user is mandatory. If the group is not set, the default user's group
; will be used.
; RPM: apache Choosed to be able to access some dir as httpd
user = ec2-user
; RPM: Keep a group allowed to write in log dir.
group = ec2-user
; Choose how the process manager will control the number of child processes.
; Possible Values:
; static - a fixed number (pm.max_children) of child processes;
; dynamic - the number of child processes are set dynamically based on the
; following directives:
; pm.max_children - the maximum number of children that can
; be alive at the same time.
; pm.start_servers - the number of children created on startup.
; pm.min_spare_servers - the minimum number of children in 'idle'
; state (waiting to process). If the number
; of 'idle' processes is less than this
; number then some children will be created.
; pm.max_spare_servers - the maximum number of children in 'idle'
; state (waiting to process). If the number
; of 'idle' processes is greater than this
; number then some children will be killed.
; Note: This value is mandatory.
pm = ondemand
pm.process_idle_timeout = 40s;
; The number of child processes to be created when pm is set to 'static' and the
; maximum number of child processes to be created when pm is set to 'dynamic'.
; This value sets the limit on the number of simultaneous requests that will be
; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
; CGI.
; Note: Used when pm is set to either 'static' or 'dynamic'
; Note: This value is mandatory.
pm.max_children = 50
; The number of child processes created on startup.
; Note: Used only when pm is set to 'dynamic'
; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
pm.start_servers = 5
; The desired minimum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.min_spare_servers = 5
; The desired maximum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.max_spare_servers = 35
; The number of requests each child process should execute before respawning.
; This can be useful to work around memory leaks in 3rd party libraries. For
; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
; Default Value: 0
;pm.max_requests = 500
; The URI to view the FPM status page. If this value is not set, no URI will be
; recognized as a status page. By default, the status page shows the following
; information:
; accepted conn - the number of request accepted by the pool;
; pool - the name of the pool;
; process manager - static or dynamic;
; idle processes - the number of idle processes;
; active processes - the number of active processes;
; total processes - the number of idle + active processes.
; The values of 'idle processes', 'active processes' and 'total processes' are
; updated each second. The value of 'accepted conn' is updated in real time.
; Example output:
; accepted conn: 12073
; pool: www
; process manager: static
; idle processes: 35
; active processes: 65
; total processes: 100
; By default the status page output is formatted as text/plain. Passing either
; 'html' or 'json' as a query string will return the corresponding output
; syntax. Example:
; http://www.foo.bar/status
; http://www.foo.bar/status?json
; http://www.foo.bar/status?html
; Note: The value must start with a leading slash (/). The value can be
; anything, but it may not be a good idea to use the .php extension or it
; may conflict with a real PHP file.
; Default Value: not set
;pm.status_path = /status
; The ping URI to call the monitoring page of FPM. If this value is not set, no
; URI will be recognized as a ping page. This could be used to test from outside
; that FPM is alive and responding, or to
; - create a graph of FPM availability (rrd or such);
; - remove a server from a group if it is not responding (load balancing);
; - trigger alerts for the operating team (24/7).
; Note: The value must start with a leading slash (/). The value can be
; anything, but it may not be a good idea to use the .php extension or it
; may conflict with a real PHP file.
; Default Value: not set
;ping.path = /ping
; This directive may be used to customize the response of a ping request. The
; response is formatted as text/plain with a 200 response code.
; Default Value: pong
;ping.response = pong
; The timeout for serving a single request after which the worker process will
; be killed. This option should be used when the 'max_execution_time' ini option
; does not stop script execution for some reason. A value of '0' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_terminate_timeout = 0
; The timeout for serving a single request after which a PHP backtrace will be
; dumped to the 'slowlog' file. A value of '0s' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_slowlog_timeout = 0
; The log file for slow requests
; Default Value: not set
; Note: slowlog is mandatory if request_slowlog_timeout is set
slowlog = /var/log/php-fpm/www-slow.log
; Set open file descriptor rlimit.
; Default Value: system defined value
;rlimit_files = 1024
; Set max core size rlimit.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0
; Chroot to this directory at the start. This value must be defined as an
; absolute path. When this value is not set, chroot is not used.
; Note: chrooting is a great security feature and should be used whenever
; possible. However, all PHP paths will be relative to the chroot
; (error_log, sessions.save_path, ...).
; Default Value: not set
;chroot =
; Chdir to this directory at the start. This value must be an absolute path.
; Default Value: current directory or / when chroot
;chdir = /var/www
; Redirect worker stdout and stderr into main error log. If not set, stdout and
; stderr will be redirected to /dev/null according to FastCGI specs.
; Default Value: no
;catch_workers_output = yes
; Limits the extensions of the main script FPM will allow to parse. This can
; prevent configuration mistakes on the web server side. You should only limit
; FPM to .php extensions to prevent malicious users to use other extensions to
; exectute php code.
; Note: set an empty value to allow all extensions.
; Default Value: .php
;security.limit_extensions = .php .php3 .php4 .php5
; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
; the current environment.
; Default Value: clean env
;env[HOSTNAME] = $HOSTNAME
;env[PATH] = /usr/local/bin:/usr/bin:/bin
;env[TMP] = /tmp
;env[TMPDIR] = /tmp
;env[TEMP] = /tmp
; Additional php.ini defines, specific to this pool of workers. These settings
; overwrite the values previously defined in the php.ini. The directives are the
; same as the PHP SAPI:
; php_value/php_flag - you can set classic ini defines which can
; be overwritten from PHP call 'ini_set'.
; php_admin_value/php_admin_flag - these directives won't be overwritten by
; PHP call 'ini_set'
; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
; Defining 'extension' will load the corresponding shared extension from
; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
; overwrite previously defined php.ini values, but will append the new value
; instead.
; Default Value: nothing is defined by default except the values in php.ini and
; specified at startup with the -d argument
;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
;php_flag[display_errors] = off
php_admin_value[error_log] = /var/log/php-fpm/www-error.log
php_admin_flag[log_errors] = on
;php_admin_value[memory_limit] = 32M
php-fpm.conf 是
;;;;;;;;;;;;;;;;;;;;;
; FPM Configuration ;
;;;;;;;;;;;;;;;;;;;;;
; All relative paths in this configuration file are relative to PHP's install
; prefix.
; Include one or more files. If glob(3) exists, it is used to include a bunch of
; files from a glob(3) pattern. This directive can be used everywhere in the
; file.
include=/etc/php-fpm.d/*.conf
;;;;;;;;;;;;;;;;;;
; Global Options ;
;;;;;;;;;;;;;;;;;;
[global]
; Pid file
; Default Value: none
pid = /var/run/php-fpm/php-fpm.pid
; Error log file
; Default Value: /var/log/php-fpm.log
error_log = /var/log/php-fpm/error.log
; Log level
; Possible Values: alert, error, warning, notice, debug
; Default Value: notice
;log_level = notice
; If this number of child processes exit with SIGSEGV or SIGBUS within the time
; interval set by emergency_restart_interval then FPM will restart. A value
; of '0' means 'Off'.
; Default Value: 0
emergency_restart_threshold = 3
; Interval of time used by emergency_restart_interval to determine when
; a graceful restart will be initiated. This can be useful to work around
; accidental corruptions in an accelerator's shared memory.
; Available Units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
emergency_restart_interval = 1m
; Time limit for child processes to wait for a reaction on signals from master.
; Available units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
process_control_timeout = 10
; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
; Default Value: yes
;daemonize = yes
;;;;;;;;;;;;;;;;;;;;
; Pool Definitions ;
;;;;;;;;;;;;;;;;;;;;
; See /etc/php-fpm.d/*.conf
最佳答案
request_terminate_timeout 在这些情况下很有用,它会自动杀死长时间的僵尸进程
关于带有 nginx 配置的 PHP-FPM(进程太多),我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/31469119/
我有一个无所事事的盒子,已经运行了一段时间,今天,由于某种原因,当我尝试重新启动nginx时,得到了以下提示。 nginx: [emerg] host not found in upstream "w
我注意到,当我使用 ubuntu 命令“nginx”启动 nginx 并执行 systemctl status nginx 时。它表明 systemctl 已禁用。此外,如果我首先使用命令 syste
我的 nginx 配置如下: proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $re
周围有两个配置文件,/etc/nginx/conf.d/default.conf和 /etc/nginx/nginx.conf,但是启用了哪一个呢?我运行的是 CentOS6.4 和 nginx/1.
我的 Nginx 配置仅适用于根位置,所有其他位置都返回“Cannot GET {location}”,其中位置是域后地址的其余部分。 这是我的/etc/nginx/sites-enabled/def
我在 nginx 中为 node.js 服务器设置了反向代理。 server { listen 80; server_name sub.domain.tld; location
我的应用程序将在两个位置提供静态文件,一个是/my/path/project/static,另一个是/my/path/project/jsutils/static。 我很难让网络服务器在两个目录中查找
我的域名注册商的 DNS 访问我的服务器并获取 nginx 默认页面,因此配置正确 我复制了一个当前正在工作的 nginx 虚拟主机,更改了 server_name和 conf 文件的名称,仅此而已。
这个问题在这里已经有了答案: Can't login in to phpPgAdmin (2 个回答) 3年前关闭。 我在centos中遇到了phpPgAdmin登录的奇怪问题,我做了所有需要的事情
我要为PoC进行的操作是向来自动态后端服务器的网页添加href。使用“ subs_filter”可以很容易地添加href,但是我需要使用响应中嵌入的信息来构造href。 是否可以使用LUA处理来自pr
我有网站服务器,它有两个代理(鱿鱼,CF),它们使用不同的 header 来获取真实的 ip。 我猜 nginx 命令 set_real_ip_from ;real_ip_header X-Forwa
在控制台显示如下: Job for nginx.service failed because the control process exited witherror code. See "syste
我有一个问题,我怀疑是 NGINX 问题。基本上,当我尝试登录到我创建的网站时,出现以下错误…… 您要查找的页面暂时不可用。请稍后再试。 有没有人以前遇到过这个? 最佳答案 如果 NGINX 虚拟主机
这是我的 nginx 配置文件: server { listen 80; server_name localhost; location / {
在我的/etc/nginx/nginx.conf 文件中,我有配置。作为:- user nginx; worker_processes 1; error_log /var/log/nginx/e
有谁知道nginx支持软退出吗?这意味着它会一直运行直到所有连接都消失或超时(超过特定时间间隔)并且在此期间也不允许新连接吗? 例如: nginx stop nginx running (2 conn
有没有办法将 Nginx 配置为类似这样的直接服务器返回 (DSR) 负载平衡器: http://blog.haproxy.com/2011/07/29/layer-4-load-balancing-
我通过 apt-get 安装了 Nginx不久前在 Debian 上,我有几个网站在上面。现在我需要安装一些额外的模块,因为我不想搞砸任何事情,所以我想在执行之前仔细检查我的过程。希望这也能帮助其他不
我知道 Apache 的 pagespeed 模块可以使页面访问更快,所以,我想知道 Nginx 是否有等效的模块? 提前致谢! 最佳答案 https://github.com/pagespeed/n
如何将worker_rlimit_nofile设置为一个更大的数字,它可以是或建议最大为多少? 我正在尝试遵循以下建议: 大多数人遇到的第二个最大限制是 与您的操作系统有关。打开一个shell,su给
我是一名优秀的程序员,十分优秀!