- iOS/Objective-C 元类和类别
- objective-c - -1001 错误,当 NSURLSession 通过 httpproxy 和/etc/hosts
- java - 使用网络类获取 url 地址
- ios - 推送通知中不播放声音
我正在使用 Java Service Wrapper (tanukisoftware) 在 centos linux 机器上运行我的 java 服务器。我的 java 代码使用 System.getenv 访问几个环境变量
当我在没有包装器的情况下运行程序时(如 ant run)我可以访问我的环境变量但是当我通过包装器执行它时我不能(服务 XX 控制台)
所以我放弃并定义属性,而不是我在 wrapper.conf 中定义的属性。这解决了我在 java 代码中的环境问题。
但后来我意识到我的 log4j.xml 也有一些环境变量引用。由于环境变量无法通过包装器获得,因此我的日志记录不起作用。
所以我必须解决并通过包装器使环境变量可用。
有趣的是,当作为服务运行时,我的 wrapper.conf 在 Windows 机器上工作,我可以访问环境变量...只是它不适用于 linux 环境。
下面是我用于两种环境的 wrapper.conf。
#encoding=UTF-8
# Configuration files must begin with a line specifying the encoding
# of the file.
#********************************************************************
# Wrapper License Properties (Ignored by Community Edition)
#********************************************************************
# Professional and Standard Editions of the Wrapper require a valid
# License Key to start. Licenses can be purchased or a trial license
# requested on the following pages:
# http://wrapper.tanukisoftware.com/purchase
# http://wrapper.tanukisoftware.com/trial
# Include file problems can be debugged by removing the first '#'
# from the following line:
##include.debug
# The Wrapper will look for either of the following optional files for a
# valid License Key. License Key properties can optionally be included
# directly in this configuration file.
#include ../conf/wrapper-license.conf
#include ../conf/wrapper-license-%WRAPPER_HOST_NAME%.conf
# The following property will output information about which License Key(s)
# are being found, and can aid in resolving any licensing problems.
#wrapper.license.debug=TRUE
#********************************************************************
# Wrapper Localization
#********************************************************************
# Specify the locale which the Wrapper should use. By default the system
# locale is used.
#wrapper.lang=en_US # en_US or ja_JP
# Specify the location of the Wrapper's language resources. If these are
# missing, the Wrapper will default to the en_US locale.
wrapper.lang.folder=../lang
#********************************************************************
# Wrapper Java Properties
#********************************************************************
# Java Application
# Locate the java binary on the system PATH:
wrapper.java.command=java
# Specify a specific java binary:
#set.JAVA_HOME=/java/path
#wrapper.java.command=%JAVA_HOME%/bin/java
# Tell the Wrapper to log the full generated Java command line.
wrapper.java.command.loglevel=INFO
# Java Main class. This class must implement the WrapperListener interface
# or guarantee that the WrapperManager class is initialized. Helper
# classes are provided to do this for you. See the Integration section
# of the documentation for details.
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
# Java Classpath (include wrapper.jar) Add class path elements as
# needed starting from 1
wrapper.java.classpath.1=../lib/wrapper.jar
wrapper.java.classpath.2=../bin/ventsimulator.jar
wrapper.java.classpath.3=../lib/netty-3.2.4.Final-sources.jar
wrapper.java.classpath.4=../lib/netty-3.2.4.Final.jar
wrapper.java.classpath.5=../lib/theronyxutils.jar
# Java Library Path (location of Wrapper.DLL or libwrapper.so)
wrapper.java.library.path.1=../lib
# Java Bits. On applicable platforms, tells the JVM to run in 32 or 64-bit mode.
wrapper.java.additional.auto_bits=TRUE
# Java Additional Parameters
# Wait 4 secs till application initializes.
# Make environment variables available as properties as an option, because on linux somehow the ENV variables are not available, through wrapper
set.default.MDASJ_HOME_WIN=C:/Projects/MDASJ/code/mdasj-core/MDASJ
set.default.MDASJ_PROJECTS_WIN=C:/Projects/MDASJ/code
set.default.MDASJ_HOME_LINUX=/opt/mdasjroot/MDASJ
set.default.MDASJ_PROJECTS_LINUX=/opt/mdasjroot
wrapper.java.additional.1=-Dorg.tanukisoftware.wrapper.WrapperSimpleApp.maxStartMainWait=4
wrapper.java.additional.2=-DMDASJ_HOME_WIN=%MDASJ_HOME_WIN%
wrapper.java.additional.3=-DMDASJ_PROJECTS_WIN=%MDASJ_PROJECTS_WIN%
wrapper.java.additional.4=-DMDASJ_HOME_LINUX=%MDASJ_HOME_LINUX%
wrapper.java.additional.5=-DMDASJ_PROJECTS_LINUX=%MDASJ_PROJECTS_LINUX%
# Initial Java Heap Size (in MB)
#wrapper.java.initmemory=3
# Maximum Java Heap Size (in MB)
#wrapper.java.maxmemory=64
# Application parameters. Add parameters as needed starting from 1
wrapper.app.parameter.1=com.theronyx.simulator.SimulatorManager
#********************************************************************
# Wrapper Logging Properties
#********************************************************************
# Enables Debug output from the Wrapper.
# wrapper.debug=TRUE
# Format of output for the console. (See docs for formats)
wrapper.console.format=PM
# Log Level for console output. (See docs for log levels)
wrapper.console.loglevel=INFO
# Log file to use for wrapper output logging.
wrapper.logfile=%MDASJ_PROJECTS%/log/ventsimulator-wrapper.log
# Format of output for the log file. (See docs for formats)
wrapper.logfile.format=LPTM
# Log Level for log file output. (See docs for log levels)
wrapper.logfile.loglevel=INFO
# Maximum size that the log file will be allowed to grow to before
# the log is rolled. Size is specified in bytes. The default value
# of 0, disables log rolling. May abbreviate with the 'k' (kb) or
# 'm' (mb) suffix. For example: 10m = 10 megabytes.
wrapper.logfile.maxsize=0
# Maximum number of rolled log files which will be allowed before old
# files are deleted. The default value of 0 implies no limit.
wrapper.logfile.maxfiles=0
# Log Level for sys/event log output. (See docs for log levels)
wrapper.syslog.loglevel=NONE
#********************************************************************
# Wrapper General Properties
#********************************************************************
# Allow for the use of non-contiguous numbered properties
wrapper.ignore_sequence_gaps=TRUE
# Title to use when running as a console
wrapper.console.title=OPUS Ventilator Simulator
#********************************************************************
# Wrapper JVM Checks
#********************************************************************
# Detect DeadLocked Threads in the JVM. (Requires Standard Edition)
wrapper.check.deadlock=TRUE
wrapper.check.deadlock.interval=60
wrapper.check.deadlock.action=RESTART
wrapper.check.deadlock.output=FULL
# Out Of Memory detection.
# (Simple match)
wrapper.filter.trigger.1000=java.lang.OutOfMemoryError
# (Only match text in stack traces if -XX:+PrintClassHistogram is being used.)
#wrapper.filter.trigger.1000=Exception in thread "*" java.lang.OutOfMemoryError
#wrapper.filter.allow_wildcards.1000=TRUE
wrapper.filter.action.1000=RESTART
wrapper.filter.message.1000=WRAPPER detected java.lang.OutOfMemoryError.....The JVM has run out of memory... RESTARTING
#********************************************************************
# Wrapper Email Notifications. (Requires Professional Edition)
#********************************************************************
# Common Event Email settings.
#wrapper.event.default.email.debug=TRUE
#wrapper.event.default.email.smtp.host=<SMTP_Host>
#wrapper.event.default.email.smtp.port=25
#wrapper.event.default.email.subject=[%WRAPPER_HOSTNAME%:%WRAPPER_NAME%:%WRAPPER_EVENT_NAME%] Event Notification
#wrapper.event.default.email.sender=<Sender email>
#wrapper.event.default.email.recipient=<Recipient email>
# Configure the log attached to event emails.
#wrapper.event.default.email.attach_log=TRUE
#wrapper.event.default.email.maillog.lines=50
#wrapper.event.default.email.maillog.format=LPTM
#wrapper.event.default.email.maillog.loglevel=INFO
# Enable specific event emails.
#wrapper.event.wrapper_start.email=TRUE
#wrapper.event.jvm_prelaunch.email=TRUE
#wrapper.event.jvm_start.email=TRUE
#wrapper.event.jvm_started.email=TRUE
#wrapper.event.jvm_deadlock.email=TRUE
#wrapper.event.jvm_stop.email=TRUE
#wrapper.event.jvm_stopped.email=TRUE
#wrapper.event.jvm_restart.email=TRUE
#wrapper.event.jvm_failed_invocation.email=TRUE
#wrapper.event.jvm_max_failed_invocations.email=TRUE
#wrapper.event.jvm_kill.email=TRUE
#wrapper.event.jvm_killed.email=TRUE
#wrapper.event.jvm_unexpected_exit.email=TRUE
#wrapper.event.wrapper_stop.email=TRUE
# Specify custom mail content
wrapper.event.jvm_restart.email.body=The JVM was restarted.\n\nPlease check on its status.\n
#********************************************************************
# Wrapper Windows NT/2000/XP Service Properties
#********************************************************************
# WARNING - Do not modify any of these properties when an application
# using this configuration file has been installed as a service.
# Please uninstall the service before modifying this section. The
# service can then be reinstalled.
# Name of the service
wrapper.name=VentSimulator
# Display name of the service
wrapper.displayname=OPUS Vent Simulator
# Description of the service
wrapper.description=Runs a Vent Simulation program to use with OPUS MDASJ, just for testing purposes
# Service dependencies. Add dependencies as needed starting from 1
wrapper.ntservice.dependency.1=
# Mode in which the service is installed. AUTO_START, DELAY_START or DEMAND_START
wrapper.ntservice.starttype=AUTO_START
# Allow the service to interact with the desktop.
wrapper.ntservice.interactive=false
最佳答案
在 Linux 上看不到环境变量是有道理的。尝试通过直接调用/etc/init.d 脚本来运行您的应用程序。它应该工作。发生的是服务命令重置环境变量(以便服务始终在一致的环境中运行)。
关于Linux 的 Java Service Wrapper 找不到环境变量,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/7437014/
关闭。这个问题不符合Stack Overflow guidelines .它目前不接受答案。 要求我们推荐或查找工具、库或最喜欢的场外资源的问题对于 Stack Overflow 来说是偏离主题的,
Linux 管道可以缓冲多少数据?这是可配置的吗? 如果管道的两端在同一个进程中,但线程不同,这会有什么不同吗? 请注意:这个“同一个进程,两个线程”的问题是理论上的边栏,真正的问题是关于缓冲的。 最
我找到了here [最后一页] 一种有趣的通过 Linux 启动 Linux 的方法。不幸的是,它只是被提及,我在网上找不到任何有用的链接。那么有人听说过一种避免引导加载程序而使用 Linux 的方法
很难说出这里要问什么。这个问题模棱两可、含糊不清、不完整、过于宽泛或夸夸其谈,无法以目前的形式得到合理的回答。如需帮助澄清此问题以便重新打开,visit the help center . 关闭 1
我试图了解 ld-linux.so 如何在 Linux 上解析对版本化符号的引用。我有以下文件: 测试.c: void f(); int main() { f(); } a.c 和 b.c:
与 RetroPie 的工作原理类似,我可以使用 Linux 应用程序作为我的桌面环境吗?我实际上并不需要像实际桌面和安装应用程序这样的东西。我只需要一种干净简单的方法来在 RaspberryPi 上
关闭。这个问题不符合Stack Overflow guidelines .它目前不接受答案。 这个问题似乎不是关于 a specific programming problem, a softwar
关闭。这个问题是off-topic .它目前不接受答案。 想改进这个问题吗? Update the question所以它是on-topic用于堆栈溢出。 关闭 10 年前。 Improve thi
有什么方法可以覆盖现有的源代码,我应该用 PyQt、PyGTK、Java 等从头开始构建吗? 最佳答案 如果您指的是软件本身而不是它所连接的存储库,那么自定义应用程序的方法就是 fork 项目。据我所
我的情况是:我在一个磁盘上安装了两个 linux。我将第一个安装在/dev/sda1 中,然后在/dev/sda2 中安装第二个然后我运行第一个系统,我写了一个脚本来在第一个系统运行时更新它。
我在 i2c-0 总线上使用地址为 0x3f 的系统监视器设备。该设备在设备树中配置有 pmbus 驱动程序。 问题是,加载 linux 内核时,这个“Sysmon”设备没有供电。因此,当我在总线 0
关闭。这个问题是off-topic .它目前不接受答案。 想改进这个问题吗? Update the question所以它是on-topic用于堆栈溢出。 关闭 11 年前。 Improve thi
我正试图在 linux 模块中分配一大块内存,而 kalloc 做不到。 我知道唯一的方法是使用 alloc_bootmem(unsigned long size) 但我只能从 linux 内核而不是
关闭。这个问题不符合Stack Overflow guidelines .它目前不接受答案。 这个问题似乎不是关于 a specific programming problem, a softwar
我有 .sh 文件来运行应用程序。在该文件中,我想动态设置服务器名称,而不是每次都配置。 我尝试了以下方法,它在 CentOS 中运行良好。 nohup /voip/java/jdk1.8.0_71/
我是在 Linux 上开发嵌入式 C++ 程序的新手。我有我的 Debian 操作系统,我在其中开发和编译了我的 C++ 项目(一个简单的控制台进程)。 我想将我的应用程序放到另一个 Debian 操
关闭。这个问题需要多问focused 。目前不接受答案。 想要改进此问题吗?更新问题,使其仅关注一个问题 editing this post . 已关闭 4 年前。 Improve this ques
我使用4.19.78版本的稳定内核,我想找到带有企鹅二进制数据的C数组。系统启动时显示。我需要在哪里搜索该内容? 我在 include/linux/linux_logo.h 文件中只找到了一些 Log
我知道可以使用 gdb 的服务器模式远程调试代码,我知道可以调试针对另一种架构交叉编译的代码,但是是否可以更进一步,从远程调试 Linux 应用程序OS X 使用 gdbserver? 最佳答案 当然
是否有任何可能的方法来运行在另一个 Linux 上编译的二进制文件?我知道当然最简单的是在另一台机器上重建它,但假设我们唯一能得到的是一个二进制文件,那么这可能与否? (我知道这可能并不容易,但我只是
我是一名优秀的程序员,十分优秀!