- iOS/Objective-C 元类和类别
- objective-c - -1001 错误,当 NSURLSession 通过 httpproxy 和/etc/hosts
- java - 使用网络类获取 url 地址
- ios - 推送通知中不播放声音
你好我是数字图像处理的初学者,我只想知道有没有标准的算法?将输入的 RGB 图像划分为所需大小的子图像,然后将这些子图像组合形成原始图像。
最佳答案
% Demo to divide a color image up into blocks.
clc; % Clear the command window.
close all; % Close all figures (except those of imtool.)
workspace; % Make sure the workspace panel is showing.
fontSize = 20;
% Read in a standard MATLAB color demo image.
folder = fullfile(matlabroot, '\toolbox\images\imdemos');
baseFileName = 'peppers.png';
% Get the full filename, with path prepended.
fullFileName = fullfile(folder, baseFileName);
if ~exist(fullFileName, 'file')
% Didn't find it there. Check the search path for it.
fullFileName = baseFileName; % No path this time.
if ~exist(fullFileName, 'file')
% Still didn't find it. Alert user.
errorMessage = sprintf('Error: %s does not exist.', fullFileName);
uiwait(warndlg(errorMessage));
return;
end
end
% Read the image from disk.
rgbImage = imread(fullFileName);
% Test code if you want to try it with a gray scale image.
% Uncomment line below if you want to see how it works with a gray scale image.
% rgbImage = rgb2gray(rgbImage);
% Display image full screen.
imshow(rgbImage);
% Enlarge figure to full screen.
set(gcf, 'units','normalized','outerposition',[0 0 1 1]);
drawnow;
% Get the dimensions of the image. numberOfColorBands should be = 3.
[rows columns numberOfColorBands] = size(rgbImage)
%==========================================================================
% The first way to divide an image up into blocks is by using mat2cell().
blockSizeR = 150; % Rows in block.
blockSizeC = 100; % Columns in block.
% Figure out the size of each block in rows.
% Most will be blockSizeR but there may be a remainder amount of less than that.
wholeBlockRows = floor(rows / blockSizeR);
blockVectorR = [blockSizeR * ones(1, wholeBlockRows), rem(rows, blockSizeR)];
% Figure out the size of each block in columns.
wholeBlockCols = floor(columns / blockSizeC);
blockVectorC = [blockSizeC * ones(1, wholeBlockCols), rem(columns, blockSizeC)];
% Create the cell array, ca.
% Each cell (except for the remainder cells at the end of the image)
% in the array contains a blockSizeR by blockSizeC by 3 color array.
% This line is where the image is actually divided up into blocks.
if numberOfColorBands > 1
% It's a color image.
ca = mat2cell(rgbImage, blockVectorR, blockVectorC, numberOfColorBands);
else
ca = mat2cell(rgbImage, blockVectorR, blockVectorC);
end
% Now display all the blocks.
plotIndex = 1;
numPlotsR = size(ca, 1);
numPlotsC = size(ca, 2);
for r = 1 : numPlotsR
for c = 1 : numPlotsC
fprintf('plotindex = %d, c=%d, r=%d\n', plotIndex, c, r);
% Specify the location for display of the image.
subplot(numPlotsR, numPlotsC, plotIndex);
% Extract the numerical array out of the cell
% just for tutorial purposes.
rgbBlock = ca{r,c};
imshow(rgbBlock); % Could call imshow(ca{r,c}) if you wanted to.
[rowsB columnsB numberOfColorBandsB] = size(rgbBlock);
% Make the caption the block number.
caption = sprintf('Block #%d of %d\n%d rows by %d columns', ...
plotIndex, numPlotsR*numPlotsC, rowsB, columnsB);
title(caption);
drawnow;
% Increment the subplot to the next location.
plotIndex = plotIndex + 1;
end
end
% Display the original image in the upper left.
subplot(4, 6, 1);
imshow(rgbImage);
title('Original Image');
%==============================================================================
% Another way to split the image up into blocks is to use indexing.
% Read in a standard MATLAB gray scale demo image.
folder = fullfile(matlabroot, '\toolbox\images\imdemos');
baseFileName = 'cameraman.tif';
fullFileName = fullfile(folder, baseFileName);
% Get the full filename, with path prepended.
fullFileName = fullfile(folder, baseFileName);
if ~exist(fullFileName, 'file')
% Didn't find it there. Check the search path for it.
fullFileName = baseFileName; % No path this time.
if ~exist(fullFileName, 'file')
% Still didn't find it. Alert user.
errorMessage = sprintf('Error: %s does not exist.', fullFileName);
uiwait(warndlg(errorMessage));
return;
end
end
grayImage = imread(fullFileName);
% Get the dimensions of the image. numberOfColorBands should be = 1.
[rows columns numberOfColorBands] = size(grayImage);
% Display the original gray scale image.
figure;
subplot(2, 2, 1);
imshow(grayImage, []);
title('Original Grayscale Image', 'FontSize', fontSize);
% Enlarge figure to full screen.
set(gcf, 'units','normalized','outerposition',[0 0 1 1]);
% Divide the image up into 4 blocks.
% Let's assume we know the block size and that all blocks will be the same size.
blockSizeR = 128; % Rows in block.
blockSizeC = 128; % Columns in block.
% Figure out the size of each block.
wholeBlockRows = floor(rows / blockSizeR);
wholeBlockCols = floor(columns / blockSizeC);
% Preallocate a 3D image
image3d = zeros(wholeBlockRows, wholeBlockCols, 3);
% Now scan though, getting each block and putting it as a slice of a 3D array.
sliceNumber = 1;
for row = 1 : blockSizeR : rows
for col = 1 : blockSizeR : columns
% Let's be a little explicit here in our variables
% to make it easier to see what's going on.
row1 = row;
row2 = row1 + blockSizeR - 1;
col1 = col;
col2 = col1 + blockSizeC - 1;
% Extract out the block into a single subimage.
oneBlock = grayImage(row1:row2, col1:col2);
% Specify the location for display of the image.
subplot(2, 2, sliceNumber);
imshow(oneBlock);
% Make the caption the block number.
caption = sprintf('Block #%d of 4', sliceNumber);
title(caption);
drawnow;
% Assign this slice to the image we just extracted.
image3D(:, :, sliceNumber) = oneBlock;
sliceNumber = sliceNumber + 1;
end
end
% Now image3D is a 3D image where each slice,
% or plane, is one quadrant of the original 2D image.
msgbox('Done with demo! Check out the two figures.');
关于java - 数字图像处理中是否有任何标准算法将输入 RGB 图像划分为所需大小的子图像(示例 8x8),我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/14372984/
我最近在读 CSAPP。在 10.9 节中,它说标准 I/O 不应该与 socket 一起使用,原因如下: (1) The restrictions of standard I/O Restricti
似乎是一个足够标准的问题,可以保证解决方案中的标准设计: 假设我想在文件中写入 x+2(或更少)个字符串。 x 字符串构成一个部分的内容,这两个字符串构成该部分的页眉和页脚。要注意的是,如果内容中没有
代码版本管理 在项目中,代码的版本管理非常重要。每个需求版本的代码开发在版本控制里都应该经过以下几个步骤。 在master分支中拉取该需求版本的两个分支,一个feature分支,
我有以下sql查询,我需要获取相应的hibernate条件查询 SELECT COUNT(DISTINCT employee_id) FROM erp_hr_payment WHERE payment
所以我正在编写一些代码,并且最近遇到了实现一些 mixin 的需要。我的问题是,设计混音的正确方法是什么?我将使用下面的示例代码来说明我的确切查询。 class Projectile(Movable,
我的环境变量包含如下双引号: $echo $CONNECT_SASL_JAAS_CONFIG org.apache.kafka.common.security.plain.PlainLoginModu
示例: /** * This function will determine whether or not one string starts with another string. * @pa
有没有办法在 Grails 中做一个不区分大小写的 in 子句? 我有这个: "in"("name", filters.tags) 我希望它忽略大小写。我想我可以做一个 sqlRestriction
我搜索了很长时间,以查找将哪些boost库添加到std库中,但是我只找到了一个新库的完整列表(如此处:http://open-std.org/jtc1/sc22/wg21/docs/library_t
我已经通过使用这个肮脏的黑客解决了我的问题: ' Filter managerial functions ActiveSheet.Range("$A$1:$BW$2211").Auto
因此,我很难理解我需要遵循的标准,以便我的 Java 程序能够嵌入 HTML。我是否只需将我的主类扩展到 Applet 类,或者我还需要做更多的事情吗?另外,在我见过的每个 Applet 示例中,它都
我对在 Hibernate 中使用限制有疑问。 我必须创建条件,设置一些限制,然后选择日期字段最大值的记录: Criteria query = session.createCriteria(Stora
我有标准: ICriteria criteria = Session.CreateCriteria() .SetFetchMode("Entity1", FetchMo
我很难编写条件来选择所有子集合或孙集合为空的实体。我可以将这些作为单独的条件来执行,但我无法将其组合成一个条件。 类结构: public class Component { p
@Entity class A { @ManyToMany private List list; ... } @Entity class B { ... } 我想使用条件(不是 sql 查询)从 A
我的数据库中有以下表结构: Table A: Table B: Table C: _______________
请帮助我: 我有下一张 table : 单位 ID 姓名 用户 ID 姓名 利率 单位 ID 用户 ID 我不明白如何从 SQL 创建正确的条件结构: 代码: SELECT * FROM Unit W
我正在构建一个包含项目的网站,每个项目都有一个页面,例如: website.com/book/123 website.com/film/456 website.com/game/789 每个项目都可以
我需要使用两个属性的组合来过滤结果列表。一个简单的 SQL 语句如下所示: SELECT TOP 10 * FROM Person WHERE FirstName + ' ' + LastName L
我有一个“ super 实体”SuperEntity 和三个扩展父类(super class)的实体 ChildEntity1、...、ChildEntity3。 搜索数据库中的所有实体很容易,即我们
我是一名优秀的程序员,十分优秀!