- android - RelativeLayout 背景可绘制重叠内容
- android - 如何链接 cpufeatures lib 以获取 native android 库?
- java - OnItemClickListener 不起作用,但 OnLongItemClickListener 在自定义 ListView 中起作用
- java - Android 文件转字符串
我能够从 intellij 连接到 mongo 数据库。 Mongo 资源管理器运行良好。
但是在连接之后,当我尝试在任何数据库上打开 Mongo Shell 时,它无法连接。
错误出现在我在 Windows 7 上运行的 intellij 上抛出以下错误
2015-10-12T15:08:24.062-0700 I CONTROL Hotfix KB2731284 or later update is installed, no need to zero-out data files
Invalid command: localhost:27017/students
Options:
General options:
-h [ --help ] show this usage information
--version show version information
-f [ --config ] arg configuration file specifying additional options
-v [ --verbose ] [=arg(=v)] be more verbose (include multiple times for more
verbosity e.g. -vvvvv)
--quiet quieter output
--port arg specify port number - 27017 by default
--bind_ip arg comma separated list of ip addresses to listen on
- all local ips by default
--ipv6 enable IPv6 support (disabled by default)
--maxConns arg max number of simultaneous connections - 1000000
by default
--logpath arg log file to send write to instead of stdout - has
to be a file, not directory
--logappend append to logpath instead of over-writing
--logRotate arg set the log rotation behavior (rename|reopen)
--timeStampFormat arg Desired format for timestamps in log messages.
One of ctime, iso8601-utc or iso8601-local
--pidfilepath arg full path to pidfile (if not set, no pidfile is
created)
--keyFile arg private key for cluster authentication
--setParameter arg Set a configurable parameter
--httpinterface enable http interface
--clusterAuthMode arg Authentication mode used for cluster
authentication. Alternatives are
(keyFile|sendKeyFile|sendX509|x509)
--auth run with security
--noauth run without security
--jsonp allow JSONP access via http (has security
implications)
--rest turn on simple rest api
--slowms arg (=100) value of slow for profile and console log
--profile arg 0=off 1=slow, 2=all
--cpu periodically show cpu and iowait utilization
--sysinfo print some diagnostic system information
--noIndexBuildRetry don't retry any index builds that were
interrupted by shutdown
--noscripting disable scripting engine
--notablescan do not allow table scans
Windows Service Control Manager options:
--install install Windows service
--remove remove Windows service
--reinstall reinstall Windows service (equivalent to --remove
followed by --install)
--serviceName arg Windows service name
--serviceDisplayName arg Windows service display name
--serviceDescription arg Windows service description
--serviceUser arg account for service execution
--servicePassword arg password used to authenticate serviceUser
Replication options:
--oplogSize arg size to use (in MB) for replication op log. default is
5% of disk space (i.e. large is good)
Master/slave options (old; use replica sets instead):
--master master mode
--slave slave mode
--source arg when slave: specify master as <server:port>
--only arg when slave: specify a single database to replicate
--slavedelay arg specify delay (in seconds) to be used when applying
master ops to slave
--autoresync automatically resync if slave data is stale
Replica set options:
--replSet arg arg is <setname>[/<optionalseedhostlist>]
--replIndexPrefetch arg specify index prefetching behavior (if secondary)
[none|_id_only|all]
Sharding options:
--configsvr declare this is a config db of a cluster; default port
27019; default dir /data/configdb
--shardsvr declare this is a shard db of a cluster; default port
27018
SSL options:
--sslOnNormalPorts use ssl on configured ports
--sslMode arg set the SSL operation mode
(disabled|allowSSL|preferSSL|requireSSL
)
--sslPEMKeyFile arg PEM file for ssl
--sslPEMKeyPassword arg PEM file password
--sslClusterFile arg Key file for internal SSL
authentication
--sslClusterPassword arg Internal authentication key file
password
--sslCAFile arg Certificate Authority file for SSL
--sslCRLFile arg Certificate Revocation List file for
SSL
--sslWeakCertificateValidation allow client to connect without
presenting a certificate
--sslAllowConnectionsWithoutCertificates
allow client to connect without
presenting a certificate
--sslAllowInvalidHostnames Allow server certificates to provide
non-matching hostnames
--sslAllowInvalidCertificates allow connections to servers with
invalid certificates
--sslFIPSMode activate FIPS 140-2 mode at startup
Storage options:
--storageEngine arg (=mmapv1) what storage engine to use
--dbpath arg directory for datafiles - defaults to \data\db\
which is C:\data\db\ based on the current
working drive
--directoryperdb each database will be stored in a separate
directory
--noprealloc disable data file preallocation - will often
hurt performance
--nssize arg (=16) .ns file size (in MB) for new databases
--quota limits each database to a certain number of
files (8 default)
--quotaFiles arg number of files allowed per db, implies --quota
--smallfiles use a smaller default file size
--syncdelay arg (=60) seconds between disk syncs (0=never, but not
recommended)
--upgrade upgrade db if needed
--repair run repair on all dbs
--repairpath arg root directory for repair files - defaults to
dbpath
--journal enable journaling
--nojournal disable journaling (journaling is on by default
for 64 bit)
--journalOptions arg journal diagnostic options
--journalCommitInterval arg how often to group/batch commit (ms)
WiredTiger options:
--wiredTigerCacheSizeGB arg maximum amount of memory to allocate
for cache; defaults to 1/2 of physical
RAM
--wiredTigerStatisticsLogDelaySecs arg (=0)
seconds to wait between each write to a
statistics file in the dbpath; 0 means
do not log statistics
--wiredTigerJournalCompressor arg (=snappy)
use a compressor for log records
[none|snappy|zlib]
--wiredTigerDirectoryForIndexes Put indexes and data in different
directories
--wiredTigerCollectionBlockCompressor arg (=snappy)
block compression algorithm for
collection data [none|snappy|zlib]
--wiredTigerIndexPrefixCompression arg (=1)
use prefix compression on row-store
leaf pages
Process finished with exit code 1
最佳答案
这是插件本身的未解决问题。请关注此位置以获取更新:
[ https://github.com/dboissier/mongo4idea/issues/107#issuecomment-155239346]
关于mongodb - 无法在 intellij 中使用 mongo shell,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/33093591/
我相信我在子 shell 中调用 exit 会导致我的程序继续: #!/bin/bash grep str file | while read line do exit 0 done
我相信我在子 shell 中调用 exit 会导致我的程序继续: #!/bin/bash grep str file | while read line do exit 0 done
我有几个脚本,它们的第一部分看起来是一样的。这部分的功能是识别脚本在哪台机器上运行并相应地设置几个变量。它看起来像这样: ENV=`echo $LOGNAME | cut -c1-8` if
这是我正在尝试做的事情。我有 4 个 shell 脚本。脚本 1 需要先运行,然后是 2,然后是 3,然后是 4,并且它们必须按此顺序运行。脚本 1 需要运行(并在后台等待)2 才能正常运行,但是脚本
我有一个名为 a.sh 的脚本,其中的内容是: //a.sh: #!/bin/bash temp=0 while [ "$temp" -ne 500 ] do echo `date`
在snakemake中,使用shell()函数执行多个命令的推荐方式是什么? 最佳答案 您可以调用shell()多次内run规则块(规则可以指定 run: 而不是 shell: ): rule pro
我有一个 shell 脚本,我向其中传递了一些参数。Test1.sh -a 1 -b 2 -c“一二三” 在 Test1.sh 中,我按以下方式调用另一个 shell 脚本。Test2.sh $* 我
我有 2 个 shell 脚本。 第二个shell脚本包含以下函数第二个.sh func1 func2 first.sh 将使用一些参数调用第二个 shell 脚本, 将使用特定于该函数的一些其他参数
我有一个 Unix shell 脚本 test.sh。在脚本中,我想调用另一个 shell,然后从子 shell 执行 shell 脚本中的其余命令并退出 说清楚: test.sh #! /bin/b
我想在 shell 脚本中更改路径环境变量。路径变量需要在shell脚本执行后修改。 最佳答案 我知道有两种方法可以做到这一点。第一种是在当前 shell 的上下文中运行脚本: . myscript.
此 shell 脚本按预期运行。 trap 'echo exit' EXIT foo() { exit } echo begin foo echo end 这是输出。 $ sh foo.sh
我正在使用 vimshell在 vim 中执行命令 nnoremap vs :VimShellPop 使用此键映射,我可以打开 vim shell 并执行诸如“捆绑安装”之类的命令,然后 输入 exi
我想连接到不同的 shell(csh、ksh 等)并在每个切换的 shell 中执行命令。 下面是反射(reflect)我的意图的示例程序: #!/bin/bash echo $SHELL csh e
我目前正在尝试使用 BNF 和 LL 解析器在 C 中重新编写 shell。 否则,我需要知道 shell 运算符的优先级是什么| , > , > , & , ; ? 有没有人可以提供给我? 谢谢 最
不幸的是,我没有suspend 命令(busybox/ash)。但是我可以使用 kill -STOP $$ 从后台 shell (sh &) 返回到父 shell(以及 fg 之后)。 但是我不想输入
我需要知道,当用户切换到另一个 shell 时,通过单击它。 我试过 shellListener.shellDeactivated()但是当 shell 失去对它自己的控件的焦点时,会触发此事件,这意
file1.txt aaaa bbbb cccc dddd eeee file2.txt DDDD cccc aaaa 结果 bbbb eeee 如果能不区分大小写就更好了! 谢谢! 最佳答案 gre
我见过解压缩目录中所有 zip 文件的循环。但是,在运行此之前,我宁愿确保我将要运行的内容正常工作: for i in dir; do cd $i; unzip '*.zip'; rm -rf *.z
我对编程还很陌生,但我想知道 vim、emacs、nano 等 shell 文本编辑器如何能够控制命令行窗口。我主要是一名 Windows 程序员,所以可能在 *nix 上有所不同。据我所知,只能将文
我有一个包含第 7 列日期的文件,我的要求是将它与今天的日期进行比较,如果小于它,则删除该完整行。 此外,如果第 7 列中提到的任何日期超过 15 天,则将其修改为最多 15 天 下面的例子- now
我是一名优秀的程序员,十分优秀!