android - 如何将已编译的 android 内核文件 'Image.gz-dtb' 转换为可刷新的 .zip 或 .img 文件？

Question

我的设备是 OnePlus3。 现在我需要自己编译内核并安装它。 I flow this to compile kernel

日志:

SYSMAP  System.map
DTC     arch/arm64/boot/dts/15801_DVT/msm8996-v3-pmi8996-mtp_15801_DVT.dtb
DTC     arch/arm64/boot/dts/15801_PVT/msm8996-v3-pmi8996-mtp_15801_PVT.dtb
DTC     arch/arm64/boot/dts/15811_PVT/msm8996pro-pmi8996-mtp_15811_PVT.dtb
DTC     arch/arm64/boot/dts/15811_PVT/msm8996pro-v1.1-pmi8994-mtp_15811_PVT.dtb
DTC     arch/arm64/boot/dts/15811_PVT2/msm8996pro-pmi8996-mtp_15811_PVT2.dtb
DTC     arch/arm64/boot/dts/15811_PVT2/msm8996pro-v1.1-pmi8994-mtp_15811_PVT2.dtb
DTC     arch/arm64/boot/dts/15811_PVT3/msm8996pro-pmi8996-mtp_15811_PVT3.dtb
DTC     arch/arm64/boot/dts/15811_PVT3/msm8996pro-v1.1-pmi8994-mtp_15811_PVT3.dtb
OBJCOPY arch/arm64/boot/Image
GZIP    arch/arm64/boot/Image.gz
DTC     arch/arm64/boot/dts/15811_PVT3/msm8996pro-v1.1-pmi8994-mtp_15811_PVT3.dtb
DTC     arch/arm64/boot/dts/15811_PVT3/msm8996pro-pmi8996-mtp_15811_PVT3.dtb
DTC     arch/arm64/boot/dts/15811_PVT/msm8996pro-v1.1-pmi8994-mtp_15811_PVT.dtb
DTC     arch/arm64/boot/dts/15811_PVT/msm8996pro-pmi8996-mtp_15811_PVT.dtb
DTC     arch/arm64/boot/dts/15801_PVT/msm8996-v3-pmi8996-mtp_15801_PVT.dtb
DTC     arch/arm64/boot/dts/15801_DVT/msm8996-v3-pmi8996-mtp_15801_DVT.dtb
DTC     arch/arm64/boot/dts/15811_PVT2/msm8996pro-pmi8996-mtp_15811_PVT2.dtb
DTC     arch/arm64/boot/dts/15811_PVT2/msm8996pro-v1.1-pmi8994-mtp_15811_PVT2.dtb
CAT     arch/arm64/boot/Image.gz-dtb
Building modules, stage 2.
MODPOST 1 modules
CC      drivers/staging/qcacld-2.0/wlan.mod.o
LD [M]  drivers/staging/qcacld-2.0/wlan.ko

如何将文件Image.gz-dtb刷入设备？

Answer 1

如果您可以获得系统的出厂 boot.img 文件，请使用 Android Image Kitchen (https://forum.xda-developers.com/showthread.php?t=2073775)。只需在 boot.img 上运行 unpacking.bat 并将 split_img 文件夹中的 boot.img-zImage 文件替换为新的 image.gz-dtb 文件。然后 repackimg.bat 会为你生成一个新的 boot.img 文件。

或者使用 AnyKernel 或 AnyKernel2 制作可刷写的 zip 文件。