- c - 在位数组中找到第一个零
- linux - Unix 显示有关匹配两种模式之一的文件的信息
- 正则表达式替换多个文件
- linux - 隐藏来自 xtrace 的命令
(这与 Would FileChannel.read read less bytes than specified if there's enough data? 相关(或者说是“相反”)
长话短说:
这会一直写入整个缓冲区吗...
ByteBuffer bytes = ...;
fileOutputStream.getChannel().write(bytes);
...或者是否有必要使用这样的循环:
ByteBuffer bytes = ...;
while (bytes.remaining() > 0)
{
fileOutputStream.getChannel().write(bytes);
}
?
由于 comment in another answer ,我想问一下,通过调用 FileChannel#write(ByteBuffer)
将 Buffer
写入 FileChannel
的行为是否有任何保证? .
仅供引用:文档说
Writes a sequence of bytes to this channel from the given buffer.
Bytes are written starting at this channel's current file position unless the channel is in append mode, in which case the position is first advanced to the end of the file. The file is grown, if necessary, to accommodate the written bytes, and then the file position is updated with the number of bytes actually written. Otherwise this method behaves exactly as specified by the WritableByteChannel interface.
和覆盖方法的文档,WritableByteChannel#write(ByteBuffer)
说
Writes a sequence of bytes to this channel from the given buffer.
An attempt is made to write up to r bytes to the channel, where r is the number of bytes remaining in the buffer, that is, src.remaining(), at the moment this method is invoked.
Suppose that a byte sequence of length n is written, where 0 <= n <= r. This byte sequence will be transferred from the buffer starting at index p, where p is the buffer's position at the moment this method is invoked; the index of the last byte written will be p + n - 1. Upon return the buffer's position will be equal to p + n; its limit will not have changed.
Unless otherwise specified, a write operation will return only after writing all of the r requested bytes. Some types of channels, depending upon their state, may write only some of the bytes or possibly none at all. A socket channel in non-blocking mode, for example, cannot write any more bytes than are free in the socket's output buffer.
This method may be invoked at any time. If another thread has already initiated a write operation upon this channel, however, then an invocation of this method will block until the first operation is complete.
Parameters: src - The buffer from which bytes are to be retrieved
Returns: The number of bytes written, possibly zero
在上面提到的关于从FileChannel
中读取 的问题中,在评论中已经对本文档的确切措辞和解释进行了一些讨论。我认为文档中的关键区别在于,对于 read 方法,文档说
A read operation might not fill the buffer, and in fact it might not read any bytes at all.
与此相反,write 方法的文档说
Unless otherwise specified, a write operation will return only after writing all of the r requested bytes. Some types of channels, depending upon their state, may write only some of the bytes or possibly none at all.
对我来说,这意味着对 FileChannel
的写操作将只有在所有字节都被写入后才会返回,因为文档中没有另外指定(除了对于返回值可能为 0 的语句,但这显然是重写方法的产物)
根据我对最大 80 MB (!) 文件大小的测试,写入操作总是一次写入整个缓冲区。不过当然,这只是试探,不足以深表大意。我试图追踪 related OpenJDK classes 中的调用,但这些很快就会分化为不同的 native 实现 - 毕竟,这不是必需的......
最佳答案
不,不能保证 write() 会耗尽整个缓冲区。该文档确实试图建立实现应该一次写入所有字节的期望,但它没有做出任何 promise :
Unless otherwise specified, a write operation will return only after writing all of the r requested bytes. Some types of channels, depending upon their state[1], may write only some of the bytes or possibly none at all.
FileChannel.write() 同样为不完整的写入留有空间:
Writes a sequence of bytes to this channel from the given buffer.
Bytes are written starting at this channel's current file position unless the channel is in append mode, in which case the position is first advanced to the end of the file. The file is grown, if necessary, to accommodate the written bytes, and then the file position is updated with the number of bytes actually written. Otherwise this method behaves exactly as specified by the WritableByteChannel interface.
因此,虽然文本暗示完整写入是一般情况,不完整写入是异常(exception)情况,但它为可能无法(能够)遵守这种一般情况的替代/ future 实现敞开大门。
正如您所指出的,这与 read() 的方法不同。我想这是因为,在合并文档时,所有已知和预期的实现都遵循执行完整写入的一般情况。
[1] 这可能是对非阻塞 channel 的引用。
关于java - FileChannel#write 总是会写入整个缓冲区吗?,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/29945685/
我正在编写一个具有以下签名的 Java 方法。 void Logger(Method method, Object[] args); 如果一个方法(例如 ABC() )调用此方法 Logger,它应该
我是 Java 新手。 我的问题是我的 Java 程序找不到我试图用作的图像文件一个 JButton。 (目前这段代码什么也没做,因为我只是得到了想要的外观第一的)。这是我的主课 代码: packag
好的,今天我在接受采访,我已经编写 Java 代码多年了。采访中说“Java 垃圾收集是一个棘手的问题,我有几个 friend 一直在努力弄清楚。你在这方面做得怎么样?”。她是想骗我吗?还是我的一生都
我的 friend 给了我一个谜语让我解开。它是这样的: There are 100 people. Each one of them, in his turn, does the following
如果我将使用 Java 5 代码的应用程序编译成字节码,生成的 .class 文件是否能够在 Java 1.4 下运行? 如果后者可以工作并且我正在尝试在我的 Java 1.4 应用程序中使用 Jav
有关于why Java doesn't support unsigned types的问题以及一些关于处理无符号类型的问题。我做了一些搜索,似乎 Scala 也不支持无符号数据类型。限制是Java和S
我只是想知道在一个 java 版本中生成的字节码是否可以在其他 java 版本上运行 最佳答案 通常,字节码无需修改即可在 较新 版本的 Java 上运行。它不会在旧版本上运行,除非您使用特殊参数 (
我有一个关于在命令提示符下执行 java 程序的基本问题。 在某些机器上我们需要指定 -cp 。 (类路径)同时执行java程序 (test为java文件名与.class文件存在于同一目录下) jav
我已经阅读 StackOverflow 有一段时间了,现在我才鼓起勇气提出问题。我今年 20 岁,目前在我的家乡(罗马尼亚克卢日-纳波卡)就读 IT 大学。足以介绍:D。 基本上,我有一家提供簿记应用
我有 public JSONObject parseXML(String xml) { JSONObject jsonObject = XML.toJSONObject(xml); r
我已经在 Java 中实现了带有动态类型的简单解释语言。不幸的是我遇到了以下问题。测试时如下代码: def main() { def ks = Map[[1, 2]].keySet()
一直提示输入 1 到 10 的数字 - 结果应将 st、rd、th 和 nd 添加到数字中。编写一个程序,提示用户输入 1 到 10 之间的任意整数,然后以序数形式显示该整数并附加后缀。 public
我有这个 DownloadFile.java 并按预期下载该文件: import java.io.*; import java.net.URL; public class DownloadFile {
我想在 GUI 上添加延迟。我放置了 2 个 for 循环,然后重新绘制了一个标签,但这 2 个 for 循环一个接一个地执行,并且标签被重新绘制到最后一个。 我能做什么? for(int i=0;
我正在对对象 Student 的列表项进行一些测试,但是我更喜欢在 java 类对象中创建硬编码列表,然后从那里提取数据,而不是连接到数据库并在结果集中选择记录。然而,自从我这样做以来已经很长时间了,
我知道对象创建分为三个部分: 声明 实例化 初始化 classA{} classB extends classA{} classA obj = new classB(1,1); 实例化 它必须使用
我有兴趣使用 GPRS 构建车辆跟踪系统。但是,我有一些问题要问以前做过此操作的人: GPRS 是最好的技术吗?人们意识到任何问题吗? 我计划使用 Java/Java EE - 有更好的技术吗? 如果
我可以通过递归方法反转数组,例如:数组={1,2,3,4,5} 数组结果={5,4,3,2,1}但我的结果是相同的数组,我不知道为什么,请帮助我。 public class Recursion { p
有这样的标准方式吗? 包括 Java源代码-测试代码- Ant 或 Maven联合单元持续集成(可能是巡航控制)ClearCase 版本控制工具部署到应用服务器 最后我希望有一个自动构建和集成环境。
我什至不知道这是否可能,我非常怀疑它是否可能,但如果可以,您能告诉我怎么做吗?我只是想知道如何从打印机打印一些文本。 有什么想法吗? 最佳答案 这里有更简单的事情。 import javax.swin
我是一名优秀的程序员,十分优秀!