- c - 在位数组中找到第一个零
- linux - Unix 显示有关匹配两种模式之一的文件的信息
- 正则表达式替换多个文件
- linux - 隐藏来自 xtrace 的命令
我在 MacOS 10.8.2 上运行 python 2.6,并尝试安装 Numpy 以使用 NLTK。我已经查看了下面突出显示的几种方法,但我还没有成功安装该软件包。
我已经按照 this 安装了 xcode建议,但这并没有解决任何问题。
我试过了 building directly , 使用
python setup.py build --fcompiler=gnu95
返回以下消息
RuntimeError: Broken toolchain: cannot link a simple C program
直接安装,我从here下载了dmg文件.直接解压文件时,numpy
提示需要安装 Python 2.6 或更高版本,因此也失败了。
我在某处读到 MacOS 附带 Apple 版本的 Python,我想避免使用它;我已经安装了 Eclipse 和 PyDev,并且相信我没有使用 Apple 版本,但是有没有办法确认这是真的,并且 numpy
正在安装在“正确”版本的 Python 上?
当我尝试运行时
sudo easy_install numpy
我得到以下输出。最初我认为它与未找到 C/Fortran 编译器有关,但我在直接构建它时安装了 gfortran
,所以也许问题出在其他方面......我无法不过,请查看消息的其余部分来诊断问题。
在这一切之后,有没有人能给我指出一些可以帮助我安装 numpy
的确定性信息?到目前为止,我所尝试的方法有什么问题(如果有的话)?
在此先谦虚地感谢您!
Searching for numpy
Reading http://pypi.python.org/simple/numpy/
Reading http://numpy.scipy.org
Reading http://sourceforge.net/project/showfiles.php?group_id=1369&package_id=175103
Reading http://numeric.scipy.org
Best match: numpy 1.6.2
Downloading http://pypi.python.org/packages/source/n/numpy/numpy-1.6.2.zip#md5=7e13c931985f90efcfa0408f845d6fee
Processing numpy-1.6.2.zip
Running numpy-1.6.2/setup.py -q bdist_egg --dist-dir /tmp/easy_install-6DObmd/numpy-1.6.2/egg-dist-tmp-KMbGBl
Running from numpy source directory.non-existing path in '/private/tmp/easy_install-6DObmd/numpy-1.6.2/numpy/distutils': 'site.cfg'
/bin/sh: svnversion: command not found
/bin/sh: svnversion: command not found
Could not locate executable f95
Could not locate executable f90
Could not locate executable f77
Could not locate executable xlf90
Could not locate executable xlf
Could not locate executable ifort
Could not locate executable ifc
Could not locate executable g77
Found executable /usr/local/bin/gfortran
sh: /usr/bin/gcc-4.2: No such file or directory
sh: /usr/bin/gcc-4.2: No such file or directory
Traceback (most recent call last):
File "/opt/local/bin/easy_install", line 8, in <module>
load_entry_point('setuptools==0.6c11', 'console_scripts', 'easy_install')()
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 1712, in main
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 1700, in with_ei_usage
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 1716, in <lambda>
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/core.py", line 152, in setup
dist.run_commands()
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 987, in run_commands
self.run_command(cmd)
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 1007, in run_command
cmd_obj.run()
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 211, in run
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 446, in easy_install
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 476, in install_item
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 655, in install_eggs
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 930, in build_and_install
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/easy_install.py", line 919, in run_setup
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/sandbox.py", line 62, in run_setup
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/sandbox.py", line 105, in run
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/sandbox.py", line 64, in <lambda>
File "setup.py", line 214, in <module>
File "setup.py", line 207, in setup_package
File "/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/core.py", line 186, in setup
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/core.py", line 152, in setup
dist.run_commands()
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 987, in run_commands
self.run_command(cmd)
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 1007, in run_command
cmd_obj.run()
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg/setuptools/command/bdist_egg.py", line 167, in run
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/cmd.py", line 333, in run_command
self.distribution.run_command(command)
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 1007, in run_command
cmd_obj.run()
File "/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/command/egg_info.py", line 8, in run
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/cmd.py", line 333, in run_command
self.distribution.run_command(command)
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/distutils/dist.py", line 1007, in run_command
cmd_obj.run()
File "/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/command/build_src.py", line 152, in run
File "/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/command/build_src.py", line 163, in build_sources
File "/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/command/build_src.py", line 298, in build_library_sources
File "/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/command/build_src.py", line 385, in generate_sources
File "/private/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/core/setup.py", line 696, in get_mathlib_info
RuntimeError: Broken toolchain: cannot link a simple C program
/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/misc_util.py:252: RuntimeWarning: Parent module 'numpy.distutils' not found while handling absolute import
Error in atexit._run_exitfuncs:
Traceback (most recent call last):
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/atexit.py", line 24, in _run_exitfuncs
func(*targs, **kargs)
File "/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/misc_util.py", line 252, in clean_up_temporary_directory
ImportError: No module named numpy.distutils
Error in sys.exitfunc:
Traceback (most recent call last):
File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/atexit.py", line 24, in _run_exitfuncs
func(*targs, **kargs)
File "/tmp/easy_install-GH52RV/numpy-1.6.2/numpy/distutils/misc_util.py", line 252, in clean_up_temporary_directory
ImportError: No module named numpy.distutils
最佳答案
我是这样解决这个问题的:
export CC=gcc
export CXX=g++
export FFLAGS=ff2c
根据我在此处的 10.7 安装说明下找到的信息:http://www.scipy.org/Installing_SciPy/Mac_OS_X
关于python - Mac 10.8.2 上的 Numpy 安装,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/13106919/
我正在处理一组标记为 160 个组的 173k 点。我想通过合并最接近的(到 9 或 10 个组)来减少组/集群的数量。我搜索过 sklearn 或类似的库,但没有成功。 我猜它只是通过 knn 聚类
我有一个扁平数字列表,这些数字逻辑上以 3 为一组,其中每个三元组是 (number, __ignored, flag[0 or 1]),例如: [7,56,1, 8,0,0, 2,0,0, 6,1,
我正在使用 pipenv 来管理我的包。我想编写一个 python 脚本来调用另一个使用不同虚拟环境(VE)的 python 脚本。 如何运行使用 VE1 的 python 脚本 1 并调用另一个 p
假设我有一个文件 script.py 位于 path = "foo/bar/script.py"。我正在寻找一种在 Python 中通过函数 execute_script() 从我的主要 Python
这听起来像是谜语或笑话,但实际上我还没有找到这个问题的答案。 问题到底是什么? 我想运行 2 个脚本。在第一个脚本中,我调用另一个脚本,但我希望它们继续并行,而不是在两个单独的线程中。主要是我不希望第
我有一个带有 python 2.5.5 的软件。我想发送一个命令,该命令将在 python 2.7.5 中启动一个脚本,然后继续执行该脚本。 我试过用 #!python2.7.5 和http://re
我在 python 命令行(使用 python 2.7)中,并尝试运行 Python 脚本。我的操作系统是 Windows 7。我已将我的目录设置为包含我所有脚本的文件夹,使用: os.chdir("
剧透:部分解决(见最后)。 以下是使用 Python 嵌入的代码示例: #include int main(int argc, char** argv) { Py_SetPythonHome
假设我有以下列表,对应于及时的股票价格: prices = [1, 3, 7, 10, 9, 8, 5, 3, 6, 8, 12, 9, 6, 10, 13, 8, 4, 11] 我想确定以下总体上最
所以我试图在选择某个单选按钮时更改此框架的背景。 我的框架位于一个类中,并且单选按钮的功能位于该类之外。 (这样我就可以在所有其他框架上调用它们。) 问题是每当我选择单选按钮时都会出现以下错误: co
我正在尝试将字符串与 python 中的正则表达式进行比较,如下所示, #!/usr/bin/env python3 import re str1 = "Expecting property name
考虑以下原型(prototype) Boost.Python 模块,该模块从单独的 C++ 头文件中引入类“D”。 /* file: a/b.cpp */ BOOST_PYTHON_MODULE(c)
如何编写一个程序来“识别函数调用的行号?” python 检查模块提供了定位行号的选项,但是, def di(): return inspect.currentframe().f_back.f_l
我已经使用 macports 安装了 Python 2.7,并且由于我的 $PATH 变量,这就是我输入 $ python 时得到的变量。然而,virtualenv 默认使用 Python 2.6,除
我只想问如何加快 python 上的 re.search 速度。 我有一个很长的字符串行,长度为 176861(即带有一些符号的字母数字字符),我使用此函数测试了该行以进行研究: def getExe
list1= [u'%app%%General%%Council%', u'%people%', u'%people%%Regional%%Council%%Mandate%', u'%ppp%%Ge
这个问题在这里已经有了答案: Is it Pythonic to use list comprehensions for just side effects? (7 个答案) 关闭 4 个月前。 告
我想用 Python 将两个列表组合成一个列表,方法如下: a = [1,1,1,2,2,2,3,3,3,3] b= ["Sun", "is", "bright", "June","and" ,"Ju
我正在运行带有最新 Boost 发行版 (1.55.0) 的 Mac OS X 10.8.4 (Darwin 12.4.0)。我正在按照说明 here构建包含在我的发行版中的教程 Boost-Pyth
学习 Python,我正在尝试制作一个没有任何第 3 方库的网络抓取工具,这样过程对我来说并没有简化,而且我知道我在做什么。我浏览了一些在线资源,但所有这些都让我对某些事情感到困惑。 html 看起来
我是一名优秀的程序员,十分优秀!