- c - 在位数组中找到第一个零
- linux - Unix 显示有关匹配两种模式之一的文件的信息
- 正则表达式替换多个文件
- linux - 隐藏来自 xtrace 的命令
我疯狂地环顾四周,但没有得到真正的答案。我有一个例子,但这取决于个人自己的图书馆,所以不太好。
起初我想获得一个接口(interface)的默认网关,但由于不同的 IP 可能有不同的路由,我很快明白我想要的是通过使用 AF_ROUTE< 获得用于给定目标 IP 的网关
套接字和 rtm_type RTM_GET
。有没有人有一个例子,我实际上以包含网关 IP(或 mac 地址)的字符串结尾?网关条目似乎是十六进制的,但也在/proc/net/route 中编码,我猜 AF_ROUTE
套接字从那里获取信息(但我猜是通过内核)。
提前致谢
和附注我刚开始使用堆栈溢出,我必须说,你们所有人都很棒!快速回复和好的回复!你是我最好的新 friend ;)
最佳答案
这是特定于操作系统的,没有统一的(或 ANSI C)API。
假设是 Linux,最好的方法是只解析/proc/net/route ,查找 Destination 为 00000000 的条目,默认网关在 Gateway 列中,您可以在其中读取网关 IP 地址的十六进制表示(在大端,我相信)
如果你想通过更具体的 API 调用来做到这一点,你将不得不经历很多麻烦,这是一个示例程序:
#include <netinet/in.h>
#include <net/if.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <linux/netlink.h>
#include <linux/rtnetlink.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#define BUFSIZE 8192
char gateway[255];
struct route_info {
struct in_addr dstAddr;
struct in_addr srcAddr;
struct in_addr gateWay;
char ifName[IF_NAMESIZE];
};
int readNlSock(int sockFd, char *bufPtr, int seqNum, int pId)
{
struct nlmsghdr *nlHdr;
int readLen = 0, msgLen = 0;
do {
/* Recieve response from the kernel */
if ((readLen = recv(sockFd, bufPtr, BUFSIZE - msgLen, 0)) < 0) {
perror("SOCK READ: ");
return -1;
}
nlHdr = (struct nlmsghdr *) bufPtr;
/* Check if the header is valid */
if ((NLMSG_OK(nlHdr, readLen) == 0)
|| (nlHdr->nlmsg_type == NLMSG_ERROR)) {
perror("Error in recieved packet");
return -1;
}
/* Check if the its the last message */
if (nlHdr->nlmsg_type == NLMSG_DONE) {
break;
} else {
/* Else move the pointer to buffer appropriately */
bufPtr += readLen;
msgLen += readLen;
}
/* Check if its a multi part message */
if ((nlHdr->nlmsg_flags & NLM_F_MULTI) == 0) {
/* return if its not */
break;
}
} while ((nlHdr->nlmsg_seq != seqNum) || (nlHdr->nlmsg_pid != pId));
return msgLen;
}
/* For printing the routes. */
void printRoute(struct route_info *rtInfo)
{
char tempBuf[512];
/* Print Destination address */
if (rtInfo->dstAddr.s_addr != 0)
strcpy(tempBuf, inet_ntoa(rtInfo->dstAddr));
else
sprintf(tempBuf, "*.*.*.*\t");
fprintf(stdout, "%s\t", tempBuf);
/* Print Gateway address */
if (rtInfo->gateWay.s_addr != 0)
strcpy(tempBuf, (char *) inet_ntoa(rtInfo->gateWay));
else
sprintf(tempBuf, "*.*.*.*\t");
fprintf(stdout, "%s\t", tempBuf);
/* Print Interface Name*/
fprintf(stdout, "%s\t", rtInfo->ifName);
/* Print Source address */
if (rtInfo->srcAddr.s_addr != 0)
strcpy(tempBuf, inet_ntoa(rtInfo->srcAddr));
else
sprintf(tempBuf, "*.*.*.*\t");
fprintf(stdout, "%s\n", tempBuf);
}
void printGateway()
{
printf("%s\n", gateway);
}
/* For parsing the route info returned */
void parseRoutes(struct nlmsghdr *nlHdr, struct route_info *rtInfo)
{
struct rtmsg *rtMsg;
struct rtattr *rtAttr;
int rtLen;
rtMsg = (struct rtmsg *) NLMSG_DATA(nlHdr);
/* If the route is not for AF_INET or does not belong to main routing table
then return. */
if ((rtMsg->rtm_family != AF_INET) || (rtMsg->rtm_table != RT_TABLE_MAIN))
return;
/* get the rtattr field */
rtAttr = (struct rtattr *) RTM_RTA(rtMsg);
rtLen = RTM_PAYLOAD(nlHdr);
for (; RTA_OK(rtAttr, rtLen); rtAttr = RTA_NEXT(rtAttr, rtLen)) {
switch (rtAttr->rta_type) {
case RTA_OIF:
if_indextoname(*(int *) RTA_DATA(rtAttr), rtInfo->ifName);
break;
case RTA_GATEWAY:
rtInfo->gateWay.s_addr= *(u_int *) RTA_DATA(rtAttr);
break;
case RTA_PREFSRC:
rtInfo->srcAddr.s_addr= *(u_int *) RTA_DATA(rtAttr);
break;
case RTA_DST:
rtInfo->dstAddr .s_addr= *(u_int *) RTA_DATA(rtAttr);
break;
}
}
//printf("%s\n", inet_ntoa(rtInfo->dstAddr));
if (rtInfo->dstAddr.s_addr == 0)
sprintf(gateway, (char *) inet_ntoa(rtInfo->gateWay));
//printRoute(rtInfo);
return;
}
int main()
{
struct nlmsghdr *nlMsg;
struct rtmsg *rtMsg;
struct route_info *rtInfo;
char msgBuf[BUFSIZE];
int sock, len, msgSeq = 0;
/* Create Socket */
if ((sock = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_ROUTE)) < 0)
perror("Socket Creation: ");
memset(msgBuf, 0, BUFSIZE);
/* point the header and the msg structure pointers into the buffer */
nlMsg = (struct nlmsghdr *) msgBuf;
rtMsg = (struct rtmsg *) NLMSG_DATA(nlMsg);
/* Fill in the nlmsg header*/
nlMsg->nlmsg_len = NLMSG_LENGTH(sizeof(struct rtmsg)); // Length of message.
nlMsg->nlmsg_type = RTM_GETROUTE; // Get the routes from kernel routing table .
nlMsg->nlmsg_flags = NLM_F_DUMP | NLM_F_REQUEST; // The message is a request for dump.
nlMsg->nlmsg_seq = msgSeq++; // Sequence of the message packet.
nlMsg->nlmsg_pid = getpid(); // PID of process sending the request.
/* Send the request */
if (send(sock, nlMsg, nlMsg->nlmsg_len, 0) < 0) {
printf("Write To Socket Failed...\n");
return -1;
}
/* Read the response */
if ((len = readNlSock(sock, msgBuf, msgSeq, getpid())) < 0) {
printf("Read From Socket Failed...\n");
return -1;
}
/* Parse and print the response */
rtInfo = (struct route_info *) malloc(sizeof(struct route_info));
//fprintf(stdout, "Destination\tGateway\tInterface\tSource\n");
for (; NLMSG_OK(nlMsg, len); nlMsg = NLMSG_NEXT(nlMsg, len)) {
memset(rtInfo, 0, sizeof(struct route_info));
parseRoutes(nlMsg, rtInfo);
}
free(rtInfo);
close(sock);
printGateway();
return 0;
}
关于c - 获取网关以用于 ANSI C 中的给定 ip,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/3288065/
我正在寻找一个控制代码来使用 ANSI 或其他一些标准在终端中创建橙色文本,这可能吗?我只看到黄色和红色可用,我认为您不能将红色和黄色混合用于同一个角色:) 最佳答案 严格来说,不:ANSI 从未标准
我知道 \33[nC移动光标 n列向前;问题是,我不知道特定行包含多少个字符。 最佳答案 什么都没有显式 ,但是屏幕“小”,您可以使用任何光标移动命令移动到任意远的目的地,终端将通过屏幕大小限制移动。
这个问题在这里已经有了答案: Oracle Joins - Comparison between conventional syntax VS ANSI Syntax (11 个回答) 8 年前关闭。
我知道在 bash 终端中,一种可靠的变色方法是使用 ANSI 转义序列。例如: echo -e "\033[0;31mbrown text\033[0;00m" 应该输出 brown text (i
上次我检查时,说您正在使用 ANSI C 编码等同于说“这是符合 C99 的代码,其中没有任何其他内容”。现在有了 C11 和 C++11,这种区别还存在吗?它还有某种意义吗? 最佳答案 历史上,“A
我的业务逻辑包含在大约 7000 行 T-SQL 存储过程中,其中大多数都具有下一个 JOIN 语法: SELECT A.A, B.B, C.C FROM aaa AS A, bbb AS B, cc
我的业务逻辑包含在大约 7000 行 T-SQL 存储过程中,其中大多数都具有下一个 JOIN 语法: SELECT A.A, B.B, C.C FROM aaa AS A, bbb AS B, cc
我正在使用 CentOS 7 和 PHP 7.0 TERM=xterm-256color 我确实有一个彩色提示和 ls 颜色,如果我通过 --ansi然后它确实显示为彩色,但我不想总是添加 --ans
在我工作过的每家公司,我发现人们仍然按照 ANSI-89 标准编写 SQL 查询: select a.id, b.id, b.address_1 from person a, address b wh
我正在使用 Delphi RIO 10.3.3。 当我将 Ansi 字符串作为 const 数组的元素之一传递时,string() 转换对其不起作用。为了让它工作,我必须先将 VAnsiString
我正在使用 Delphi RIO 10.3.3。 当我将 Ansi 字符串作为 const 数组的元素之一传递时,string() 转换对其不起作用。为了让它工作,我必须先将 VAnsiString
很难说出这里问的是什么。这个问题是含糊的、模糊的、不完整的、过于宽泛的或修辞性的,无法以目前的形式得到合理的回答。如需帮助澄清此问题以便重新打开它,visit the help center 。 已关
当我在终端上调整大小时,它保持全屏显示。我想,有某种方法可以找出终端的屏幕尺寸。我怎样才能在 VT100 中做到这一点? 使用 ,当我列出文件夹时,它以蓝色显示文件夹。 (或者让我们说不同的颜色)但是
我的程序正在向某个日志文件发送characters-colored文本: echo -e "\\033[38;5;2m-->\\033[0m Starting program." | tee $Log
我刚开始使用 gsoap。我只使用 c++ 取得了 4 个小成功,但是我当前的项目限制了我设置源代码生成选项来创建纯 ANSI C(不是 c++)。我似乎无法成功调用该服务,错误返回为 0xC0000
来自 http://blocktronics.org/ 的 ANSI 文件似乎使用的是另一种 ANSI 编码,而不是我的 VT100 终端仿真器支持的编码。 如果我使用 tetraview 查看这些文
如何在 Java 中将十六进制字符串转换为 ansi(窗口 1252)以及将 ansi(窗口 1252)转换为十六进制字符串。 python(完美运行) q = "hex string value"
我用 java 编写了一个 android 应用程序来获取用户答案并将它们保存在一个文件中。问题是这个文件是以 utf-8 格式保存的。最终用户将在 IBM SPSS 中打开这些文件,这是一种适用于
关闭。这个问题不满足Stack Overflow guidelines .它目前不接受答案。 想改善这个问题吗?更新问题,使其成为 on-topic对于堆栈溢出。 7年前关闭。 锁定。这个问题及其答案
这个问题在这里已经有了答案: 关闭 11 年前。 Possible Duplicates: Floating point inaccuracy examples Is JavaScript's Ma
我是一名优秀的程序员,十分优秀!