个人中心
文章发布
退出
作者热门文章
- c - 在位数组中找到第一个零
- linux - Unix 显示有关匹配两种模式之一的文件的信息
- 正则表达式替换多个文件
- linux - 隐藏来自 xtrace 的命令
24
4
我想从 GNURadio gr-radar OOT 模块执行 usrp_echotimer_dual_cw 示例。
流程图在内部千兆以太网适配器上运行良好，但在外部 PCI 千兆以太网适配器上运行失败。
下面是流程图成功执行(eth0)的输出:
Executing: "/home/christophe/new/examples/usrp/usrp_echotimer_dual_cw.py"
linux; GNU C++ version 4.8.4; Boost_105400; UHD_003.010.git-101-g4a1cb1f2
Using Volk machine: avx_64_mmx_orc
-- Opening a USRP2/N-Series device...
-- Current recv frame size: 1472 bytes
-- Current send frame size: 1472 bytes
UHD Warning:
The recv buffer could not be resized sufficiently.
Target sock buff size: 50000000 bytes.
Actual sock buff size: 1000000 bytes.
See the transport application notes on buffer resizing.
Please run: sudo sysctl -w net.core.rmem_max=50000000
UHD Warning:
The recv buffer could not be resized sufficiently.
Target sock buff size: 50000000 bytes.
Actual sock buff size: 1000000 bytes.
See the transport application notes on buffer resizing.
Please run: sudo sysctl -w net.core.rmem_max=50000000
UHD Warning:
The send buffer could not be resized sufficiently.
Target sock buff size: 1048576 bytes.
Actual sock buff size: 1000000 bytes.
See the transport application notes on buffer resizing.
Please run: sudo sysctl -w net.core.wmem_max=1048576
Using USRP Device (TX):
Single USRP:
Device: USRP2 / N-Series Device
Mboard 0: N210r4
RX Channel: 0
RX DSP: 0
RX Dboard: A
RX Subdev: RFX2400 RX
TX Channel: 0
TX DSP: 0
TX Dboard: A
TX Subdev: RFX2400 TX
Setting TX Rate: 14250000
UHD Warning:
The requested interpolation is odd; the user should expect CIC rolloff.
Select an even interpolation to ensure that a halfband filter is enabled.
interpolation = dsp_rate/samp_rate -> 7 = (100.000000 MHz)/(14.250000 MHz)
UHD Warning:
The hardware does not support the requested TX sample rate:
Target sample rate: 14.250000 MSps
Actual sample rate: 14.285714 MSps
Actual TX Rate: 1.42857e+07
UHD Warning:
The requested interpolation is odd; the user should expect CIC rolloff.
Select an even interpolation to ensure that a halfband filter is enabled.
interpolation = dsp_rate/samp_rate -> 7 = (100.000000 MHz)/(14.285714 MHz)
-- Opening a USRP2/N-Series device...
-- Current recv frame size: 1472 bytes
-- Current send frame size: 1472 bytes
UHD Warning:
The recv buffer could not be resized sufficiently.
Target sock buff size: 50000000 bytes.
Actual sock buff size: 1000000 bytes.
See the transport application notes on buffer resizing.
Please run: sudo sysctl -w net.core.rmem_max=50000000
UHD Warning:
The recv buffer could not be resized sufficiently.
Target sock buff size: 50000000 bytes.
Actual sock buff size: 1000000 bytes.
See the transport application notes on buffer resizing.
Please run: sudo sysctl -w net.core.rmem_max=50000000
UHD Warning:
The send buffer could not be resized sufficiently.
Target sock buff size: 1048576 bytes.
Actual sock buff size: 1000000 bytes.
See the transport application notes on buffer resizing.
Please run: sudo sysctl -w net.core.wmem_max=1048576
Using USRP Device (RX):
Single USRP:
Device: USRP2 / N-Series Device
Mboard 0: USRP2 r3
RX Channel: 0
RX DSP: 0
RX Dboard: A
RX Subdev: RFX2400 RX
TX Channel: 0
TX DSP: 0
TX Dboard: A
TX Subdev: RFX2400 TX
Setting RX Rate: 14250000
UHD Warning:
The requested decimation is odd; the user should expect CIC rolloff.
Select an even decimation to ensure that a halfband filter is enabled.
decimation = dsp_rate/samp_rate -> 7 = (100.000000 MHz)/(14.250000 MHz)
UHD Warning:
The hardware does not support the requested RX sample rate:
Target sample rate: 14.250000 MSps
Actual sample rate: 14.285714 MSps
Actual RX Rate: 1.42857e+07
UHD Warning:
The requested decimation is odd; the user should expect CIC rolloff.
Select an even decimation to ensure that a halfband filter is enabled.
decimation = dsp_rate/samp_rate -> 7 = (100.000000 MHz)/(14.285714 MHz)
set_min_output_buffer on block 5 to 4194304
set_min_output_buffer on block 6 to 4194304
set_min_output_buffer on block 7 to 4194304
set_min_output_buffer on block 8 to 4194304
set_min_output_buffer on block 9 to 4194304
set_min_output_buffer on block 17 to 4194304
set_min_output_buffer on block 18 to 4194304
set_min_output_buffer on block 19 to 4194304
set_min_output_buffer on block 20 to 4194304
set_min_output_buffer on block 21 to 4194304
set_min_output_buffer on block 22 to 4194304
// Print results
rx_time: 2:0.0476682
velocity: -5.82422
range: 4.83493
// Print results
rx_time: 2:0.411017
velocity: 0.416016
range: 4.80168
// Print results
rx_time: 2:0.770647
velocity: 1.24805
range: 4.66541
// Print results
rx_time: 3:0.122836
velocity: 1.24805
range: 4.86308
// Print results
rx_time: 3:0.489277
velocity: 1.66406
range: 4.80136
// Print results
rx_time: 3:0.848081
velocity: -15.8086
range: 5.37644
// Print results
rx_time: 4:0.198079
velocity: 4.57617
range: 5.10404
// Print results
rx_time: 4:0.558055
velocity: 4.99219
range: 4.4827
// Print results
rx_time: 4:0.917475
velocity: -0.832031
range: 4.62831
// Print results
rx_time: 5:0.266247
velocity: 6.65625
range: 5.24577
// Print results
rx_time: 5:0.625892
velocity: -6.65625
range: 5.5386
失败的执行 (eth1) 如下所示:
Executing: "/home/christophe/new/examples/usrp/usrp_echotimer_dual_cw.py"
linux; GNU C++ version 4.8.4; Boost_105400; UHD_003.010.git-101-g4a1cb1f2
Using Volk machine: avx_64_mmx_orc
-- Opening a USRP2/N-Series device...
-- Current recv frame size: 1472 bytes
-- Current send frame size: 1472 bytes
UHD Warning:
The recv buffer could not be resized sufficiently.
Target sock buff size: 50000000 bytes.
Actual sock buff size: 1000000 bytes.
See the transport application notes on buffer resizing.
Please run: sudo sysctl -w net.core.rmem_max=50000000
UHD Warning:
The recv buffer could not be resized sufficiently.
Target sock buff size: 50000000 bytes.
Actual sock buff size: 1000000 bytes.
See the transport application notes on buffer resizing.
Please run: sudo sysctl -w net.core.rmem_max=50000000
UHD Warning:
The send buffer could not be resized sufficiently.
Target sock buff size: 1048576 bytes.
Actual sock buff size: 1000000 bytes.
See the transport application notes on buffer resizing.
Please run: sudo sysctl -w net.core.wmem_max=1048576
Using USRP Device (TX):
Single USRP:
Device: USRP2 / N-Series Device
Mboard 0: N210r4
RX Channel: 0
RX DSP: 0
RX Dboard: A
RX Subdev: RFX2400 RX
TX Channel: 0
TX DSP: 0
TX Dboard: A
TX Subdev: RFX2400 TX
Setting TX Rate: 14250000
UHD Warning:
The requested interpolation is odd; the user should expect CIC rolloff.
Select an even interpolation to ensure that a halfband filter is enabled.
interpolation = dsp_rate/samp_rate -> 7 = (100.000000 MHz)/(14.250000 MHz)
UHD Warning:
The hardware does not support the requested TX sample rate:
Target sample rate: 14.250000 MSps
Actual sample rate: 14.285714 MSps
Actual TX Rate: 1.42857e+07
UHD Warning:
The requested interpolation is odd; the user should expect CIC rolloff.
Select an even interpolation to ensure that a halfband filter is enabled.
interpolation = dsp_rate/samp_rate -> 7 = (100.000000 MHz)/(14.285714 MHz)
-- Opening a USRP2/N-Series device...
-- Current recv frame size: 1472 bytes
-- Current send frame size: 1472 bytes
UHD Warning:
The recv buffer could not be resized sufficiently.
Target sock buff size: 50000000 bytes.
Actual sock buff size: 1000000 bytes.
See the transport application notes on buffer resizing.
Please run: sudo sysctl -w net.core.rmem_max=50000000
UHD Warning:
The recv buffer could not be resized sufficiently.
Target sock buff size: 50000000 bytes.
Actual sock buff size: 1000000 bytes.
See the transport application notes on buffer resizing.
Please run: sudo sysctl -w net.core.rmem_max=50000000
UHD Warning:
The send buffer could not be resized sufficiently.
Target sock buff size: 1048576 bytes.
Actual sock buff size: 1000000 bytes.
See the transport application notes on buffer resizing.
Please run: sudo sysctl -w net.core.wmem_max=1048576
Using USRP Device (RX):
Single USRP:
Device: USRP2 / N-Series Device
Mboard 0: USRP2 r3
RX Channel: 0
RX DSP: 0
RX Dboard: A
RX Subdev: RFX2400 RX
TX Channel: 0
TX DSP: 0
TX Dboard: A
TX Subdev: RFX2400 TX
Setting RX Rate: 14250000
UHD Warning:
The requested decimation is odd; the user should expect CIC rolloff.
Select an even decimation to ensure that a halfband filter is enabled.
decimation = dsp_rate/samp_rate -> 7 = (100.000000 MHz)/(14.250000 MHz)
UHD Warning:
The hardware does not support the requested RX sample rate:
Target sample rate: 14.250000 MSps
Actual sample rate: 14.285714 MSps
Actual RX Rate: 1.42857e+07
UHD Warning:
The requested decimation is odd; the user should expect CIC rolloff.
Select an even decimation to ensure that a halfband filter is enabled.
decimation = dsp_rate/samp_rate -> 7 = (100.000000 MHz)/(14.285714 MHz)
set_min_output_buffer on block 5 to 4194304
set_min_output_buffer on block 6 to 4194304
set_min_output_buffer on block 7 to 4194304
set_min_output_buffer on block 8 to 4194304
set_min_output_buffer on block 9 to 4194304
set_min_output_buffer on block 17 to 4194304
set_min_output_buffer on block 18 to 4194304
set_min_output_buffer on block 19 to 4194304
set_min_output_buffer on block 20 to 4194304
set_min_output_buffer on block 21 to 4194304
set_min_output_buffer on block 22 to 4194304
DReceive timeout before all samples received...
ULLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLterminate called after throwing an instance of 'std::runtime_error'
what(): Receiver error ERROR_CODE_OVERFLOW (Out of sequence error)
这些是我的网卡:
[0] christophe:~ % lspci -nn | grep -i ethernet
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
02:05.0 Ethernet controller [0200]: Intel Corporation 82541PI Gigabit Ethernet Controller [8086:107c] (rev 05)
我认为这与计算机的性能无关，因为该流程图在较弱的笔记本电脑(intel core 2 duo)上运行良好，但在我的 i7 台式机上却失败了。
最佳答案
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
82579LM 是唯一已知的非 USB 千兆位以太网适配器，它随机丢弃数据包而不通知操作系统。
恐怕您将不得不使用不同的 PCIe-Gigabit 适配器。
顺便说一句，L 表示您的数据包(通常包含一些供 USRP 执行的命令)晚于指定的命令执行时间。
The source code where the L get's printed :
else if (metadata.event_code &
async_metadata_t::EVENT_CODE_TIME_ERROR
) UHD_MSG(fastpath) << "L";
现在，EVENT_CODE_TIME_ERROR means那个
Packet had time that was late.
这可能是您的网卡较早丢弃数据包的结果，因此计时命令以某种方式乱序，或者您的应用程序变得困惑。通常，这表明应用程序设计不当，但由于您的网络硬件肯定存在问题(看到 Controller 多次失败，抱歉)，我会先修复它，然后再进一步调查。
关于linux - 一个网络适配器的流程图失败并显示 "LLLL..."，另一个适配器成功，我们在Stack Overflow上找到一个类似的问题： https://stackoverflow.com/questions/34673999/
24
4
0
关闭。这个问题不符合Stack Overflow guidelines .它目前不接受答案。 要求我们推荐或查找工具、库或最喜欢的场外资源的问题对于 Stack Overflow 来说是偏离主题的，
Linux 管道可以缓冲多少数据？这是可配置的吗？ 如果管道的两端在同一个进程中，但线程不同，这会有什么不同吗？ 请注意:这个“同一个进程，两个线程”的问题是理论上的边栏，真正的问题是关于缓冲的。 最
我找到了here [最后一页] 一种有趣的通过 Linux 启动 Linux 的方法。不幸的是，它只是被提及，我在网上找不到任何有用的链接。那么有人听说过一种避免引导加载程序而使用 Linux 的方法
很难说出这里要问什么。这个问题模棱两可、含糊不清、不完整、过于宽泛或夸夸其谈，无法以目前的形式得到合理的回答。如需帮助澄清此问题以便重新打开，visit the help center . 关闭 1
我试图了解 ld-linux.so 如何在 Linux 上解析对版本化符号的引用。我有以下文件: 测试.c: void f(); int main() { f(); } a.c 和 b.c:
与 RetroPie 的工作原理类似，我可以使用 Linux 应用程序作为我的桌面环境吗？我实际上并不需要像实际桌面和安装应用程序这样的东西。我只需要一种干净简单的方法来在 RaspberryPi 上
关闭。这个问题不符合Stack Overflow guidelines .它目前不接受答案。 这个问题似乎不是关于 a specific programming problem, a softwar
关闭。这个问题是off-topic .它目前不接受答案。 想改进这个问题吗？ Update the question所以它是on-topic用于堆栈溢出。 关闭 10 年前。 Improve thi
有什么方法可以覆盖现有的源代码，我应该用 PyQt、PyGTK、Java 等从头开始构建吗？ 最佳答案 如果您指的是软件本身而不是它所连接的存储库，那么自定义应用程序的方法就是 fork 项目。据我所
我的情况是:我在一个磁盘上安装了两个 linux。我将第一个安装在/dev/sda1 中，然后在/dev/sda2 中安装第二个然后我运行第一个系统，我写了一个脚本来在第一个系统运行时更新它。
我在 i2c-0 总线上使用地址为 0x3f 的系统监视器设备。该设备在设备树中配置有 pmbus 驱动程序。 问题是，加载 linux 内核时，这个“Sysmon”设备没有供电。因此，当我在总线 0
关闭。这个问题是off-topic .它目前不接受答案。 想改进这个问题吗？ Update the question所以它是on-topic用于堆栈溢出。 关闭 11 年前。 Improve thi
我正试图在 linux 模块中分配一大块内存，而 kalloc 做不到。 我知道唯一的方法是使用 alloc_bootmem(unsigned long size) 但我只能从 linux 内核而不是
关闭。这个问题不符合Stack Overflow guidelines .它目前不接受答案。 这个问题似乎不是关于 a specific programming problem, a softwar
我有 .sh 文件来运行应用程序。在该文件中，我想动态设置服务器名称，而不是每次都配置。 我尝试了以下方法，它在 CentOS 中运行良好。 nohup /voip/java/jdk1.8.0_71/
我是在 Linux 上开发嵌入式 C++ 程序的新手。我有我的 Debian 操作系统，我在其中开发和编译了我的 C++ 项目(一个简单的控制台进程)。 我想将我的应用程序放到另一个 Debian 操
关闭。这个问题需要多问focused 。目前不接受答案。 想要改进此问题吗？更新问题，使其仅关注一个问题 editing this post . 已关闭 4 年前。 Improve this ques
我使用4.19.78版本的稳定内核，我想找到带有企鹅二进制数据的C数组。系统启动时显示。我需要在哪里搜索该内容？ 我在 include/linux/linux_logo.h 文件中只找到了一些 Log
我知道可以使用 gdb 的服务器模式远程调试代码，我知道可以调试针对另一种架构交叉编译的代码，但是是否可以更进一步，从远程调试 Linux 应用程序OS X 使用 gdbserver？ 最佳答案 当然
是否有任何可能的方法来运行在另一个 Linux 上编译的二进制文件？我知道当然最简单的是在另一台机器上重建它，但假设我们唯一能得到的是一个二进制文件，那么这可能与否？ (我知道这可能并不容易，但我只是
我是一名优秀的程序员,十分优秀！