linux - 如何在嵌入式 Linux (ARM) 中读取/写入通过 SPI 连接的闪存？

Question

我正在使用 Yocto 和 meta-atmel 构建嵌入式 Linux(4.4.19)。我的板上有一个通过 SPI 连接的闪存。我尝试了几种写在上面的方法。但他们都失败了。如何向其中读取/写入数据？

一些信息:

闪存类型 4Mbit:
s25fl164k ( http://www.farnell.com/datasheets/1756778.pdf )

通过设备树包含:

    spi1: spi@f8008000 {
        cs-gpios = <&pioC 25 GPIO_ACTIVE_HIGH>;
        status = "okay";

        m25p80@0 {
            compatible = "spansion,s25fl164k";
            spi-max-frequency = <50000000>;
            reg = <0>;
        };
    };

内核配置:

• 已激活 MTD 设备
• SPI 激活
• SPI 设备驱动已激活

dmesg 启动时打印:

[    2.630000] Creating 8 MTD partitions on "atmel_nand":
[    2.640000] 0x000000000000-0x000000040000 : "bootstrap"
[    2.640000] 0x000000040000-0x0000000c0000 : "uboot"
[    2.650000] 0x0000000c0000-0x000000100000 : "env"
[    2.660000] 0x000000100000-0x000000140000 : "env_redundant"
[    2.660000] 0x000000140000-0x000000180000 : "spare"
[    2.670000] 0x000000180000-0x000000200000 : "dtb"
[    2.670000] 0x000000200000-0x000000800000 : "kernel"
[    2.680000] 0x000000800000-0x000010000000 : "rootfs"
[    2.690000] atmel_spi f0004000.spi: version: 0x213
[    2.690000] atmel_spi f0004000.spi: DMA TX channel not available, SPI unable to use DMA
[    2.700000] atmel_spi f0004000.spi: Atmel SPI Controller using PIO only
[    2.700000] atmel_spi f0004000.spi: Atmel SPI Controller at 0xf0004000 (irq 25)
[    2.710000] m25p80 spi32766.0: at25df321a (4096 Kbytes)

fdisk打印(查看mtdblock8):

root@sama5d3xek:~# fdisk -l
Disk /dev/ram0: 8 MiB, 8388608 bytes, 16384 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram1: 8 MiB, 8388608 bytes, 16384 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram2: 8 MiB, 8388608 bytes, 16384 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram3: 8 MiB, 8388608 bytes, 16384 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/mtdblock0: 256 KiB, 262144 bytes, 512 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock1: 512 KiB, 524288 bytes, 1024 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock2: 256 KiB, 262144 bytes, 512 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock3: 256 KiB, 262144 bytes, 512 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock4: 256 KiB, 262144 bytes, 512 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock5: 512 KiB, 524288 bytes, 1024 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock6: 6 MiB, 6291456 bytes, 12288 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock7: 248 MiB, 260046848 bytes, 507904 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock8: 4 MiB, 4194304 bytes, 8192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mmcblk0: 7.4 GiB, 7985954816 bytes, 15597568 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000

Device         Boot Start      End  Sectors  Size Id Type
/dev/mmcblk0p1       8192 15597567 15589376  7.4G  b W95 FAT32

阅读/写作测试:

cat /dev/mtdblock8
echo "hello" > /dev/mtdblock8
cat /dev/mtdblock8

我没有得到任何结果/错误。

安装:

mkdir /tmp/abc
mount -t jffs2 /dev/mtdblock8 /tmp/abc
mount: /dev/mtdblock8: can't read superblock

有什么想法吗？

我喜欢做演示。假设在 SPI 闪存的位置 12345 上写入“hello Linux”。

Answer 1

也许设备被 U-Boot 锁定，并且 ioctl UNLOCK 未在内核的 m25p80 驱动程序中实现。我以前见过，引用erasing-flash-nor-ioctlmemunlock-return-status .