python - 无法使用 sort_contors 构建七段 OCR

Question

我正在尝试构建一个 OCR 来识别下面提到的七段显示

使用open CV的预处理工具我搞定了

现在我正在尝试学习本教程 - https://www.pyimagesearch.com/2017/02/13/recognizing-digits-with-opencv-and-python/

但在这方面

digitCnts = contours.sort_contours(digitCnts,
    method="left-to-right")[0]
digits = []

我得到的错误是 -

错误已使用 THRESH_BINARY_INV 解决，但 OCR 仍然无法正常工作，任何修复都很好

文件“/Users/ms/anaconda3/lib/python3.6/site-packages/imutils/contours.py”，第 25 行，在 sort_contours 键=lambda b: b 1 [i], reverse=反向))

ValueError:没有足够的值来解压(预期 2，得到 0)

知道如何解决这个问题并使我的 OCR 成为一个工作模型

我的全部代码是:

import numpy as np 
import cv2
import imutils
# import the necessary packages
from imutils.perspective import four_point_transform
from imutils import contours
import imutils
import cv2

# define the dictionary of digit segments so we can identify
# each digit on the thermostat
DIGITS_LOOKUP = {
    (1, 1, 1, 0, 1, 1, 1): 0,
    (0, 0, 1, 0, 0, 1, 0): 1,
    (1, 0, 1, 1, 1, 1, 0): 2,
    (1, 0, 1, 1, 0, 1, 1): 3,
    (0, 1, 1, 1, 0, 1, 0): 4,
    (1, 1, 0, 1, 0, 1, 1): 5,
    (1, 1, 0, 1, 1, 1, 1): 6,
    (1, 0, 1, 0, 0, 1, 0): 7,
    (1, 1, 1, 1, 1, 1, 1): 8,
    (1, 1, 1, 1, 0, 1, 1): 9
}

# load image
image = cv2.imread('d4.jpg')
# create hsv
hsv = cv2.cvtColor(image, cv2.COLOR_BGR2HSV)

 # set lower and upper color limits
low_val = (60,180,160)
high_val = (179,255,255)
# Threshold the HSV image 
mask = cv2.inRange(hsv, low_val,high_val)
# find contours in mask
ret, cont, hierarchy = cv2.findContours(mask,cv2.RETR_EXTERNAL, cv2.CHAIN_APPROX_SIMPLE)

# select the largest contour
largest_area = 0
for cnt in cont:
    if cv2.contourArea(cnt) > largest_area:
        cont = cnt
        largest_area = cv2.contourArea(cnt)

# get the parameters of the boundingbox
x,y,w,h = cv2.boundingRect(cont)

# create and show subimage
roi = image[y:y+h, x:x+w]
cv2.imshow("Result", roi)


#  draw box on original image and show image
cv2.rectangle(image, (x,y),(x+w,y+h), (0,0,255),2)
cv2.imshow("Image", image)

grayscaled = cv2.cvtColor(roi,cv2.COLOR_BGR2GRAY)
retval, threshold = cv2.threshold(grayscaled, 10, 255, cv2.THRESH_BINARY)
retval2,threshold2 = cv2.threshold(grayscaled,125,255,cv2.THRESH_BINARY+cv2.THRESH_OTSU)
cv2.imshow('threshold',threshold2)
cv2.waitKey(0)
cv2.destroyAllWindows()
# find contours in the thresholded image, then initialize the
# digit contours lists
cnts = cv2.findContours(threshold2.copy(), cv2.RETR_EXTERNAL,
    cv2.CHAIN_APPROX_SIMPLE)
cnts = imutils.grab_contours(cnts)
digitCnts = []

# loop over the digit area candidates
for c in cnts:
    # compute the bounding box of the contour
    (x, y, w, h) = cv2.boundingRect(c)
    # if the contour is sufficiently large, it must be a digit
    if w >= 15 and (h >= 30 and h <= 40):
        digitCnts.append(c)
# sort the contours from left-to-right, then initialize the
# actual digits themselves
digitCnts = contours.sort_contours(digitCnts,
    method="left-to-right")[0]
digits = []


# loop over each of the digits
for c in digitCnts:
    # extract the digit ROI
    (x, y, w, h) = cv2.boundingRect(c)
    roi = thresh[y:y + h, x:x + w]

    # compute the width and height of each of the 7 segments
    # we are going to examine
    (roiH, roiW) = roi.shape
    (dW, dH) = (int(roiW * 0.25), int(roiH * 0.15))
    dHC = int(roiH * 0.05)

    # define the set of 7 segments
    segments = [
        ((0, 0), (w, dH)),  # top
        ((0, 0), (dW, h // 2)), # top-left
        ((w - dW, 0), (w, h // 2)), # top-right
        ((0, (h // 2) - dHC) , (w, (h // 2) + dHC)), # center
        ((0, h // 2), (dW, h)), # bottom-left
        ((w - dW, h // 2), (w, h)), # bottom-right
        ((0, h - dH), (w, h))   # bottom
    ]
    on = [0] * len(segments)

    # loop over the segments
    for (i, ((xA, yA), (xB, yB))) in enumerate(segments):
        # extract the segment ROI, count the total number of
        # thresholded pixels in the segment, and then compute
        # the area of the segment
        segROI = roi[yA:yB, xA:xB]
        total = cv2.countNonZero(segROI)
        area = (xB - xA) * (yB - yA)

        # if the total number of non-zero pixels is greater than
        # 50% of the area, mark the segment as "on"
        if total / float(area) > 0.5:
            on[i]= 1

    # lookup the digit and draw it on the image
    digit = DIGITS_LOOKUP[tuple(on)]
    digits.append(digit)
    cv2.rectangle(output, (x, y), (x + w, y + h), (0, 255, 0), 1)
    cv2.putText(output, str(digit), (x - 10, y - 10),
        cv2.FONT_HERSHEY_SIMPLEX, 0.65, (0, 255, 0), 2)
# display the digits
print(u"{}{}.{}{}.{}{} \u00b0C".format(*digits))
cv2.imshow("Input", image)
cv2.imshow("Output", output)
cv2.waitKey(0)

帮助修复我的 OCR 会很棒

Answer 1

我认为您创建的查找表是用于七位显示，而不是用于七位OCR。至于显示的大小是固定的，我觉得你可以尝试把它分割成不同的区域，然后使用template-matching 或k-means 来识别。

这是我的预处理步骤:

(1) 在HSV

中找到浅绿色显示

mask = cv2.inRange(hsv, (50, 100, 180), (70, 255, 255))

(2) 尝试投影分离，使用LUT识别标准的七位数字:

(3)在检测到的绿色显示器上试一下