- objective-c - iOS 5 : Can you override UIAppearance customisations in specific classes?
- iphone - 如何将 CGFontRef 转换为 UIFont?
- ios - 以编程方式关闭标记的信息窗口 google maps iOS
- ios - Xcode 5 - 尝试验证存档时出现 "No application records were found"
我正试图让我的应用程序在模拟器和我的设备上再次运行。在出现此错误之前,我经历了 XCode 签名错误的漫长旅程,但我知道我似乎真的被困住了。
错误:
当我尝试在设备上启动该应用程序时,它构建时没有任何错误,但在安装该应用程序后我收到错误消息:
无法启动“APP_X_Y”-“A”数据包返回错误:-1
不幸的是,我也无法使用模拟器 - 它卡在“Attaching to APP_X_Y”。您也可以通过here 查看模拟器问题。 - 但没有最终的解决方案。
到目前为止我做了什么:
在出现不同的 XCode 错误后,我完成了以下 Stackoverflow 问题,每个问题都帮助我进入了一个新的水平。
但在最后一步,我认为事情真的搞砸了:XCode 无法再找到配置文件,这就是为什么我删除了项目文件中的配置文件字符串,就像这里推荐的那样: Codesign error: Provisioning profile cannot be found after deleting expired profile
我知道我正在努力处理数据包返回的 -1 错误,我在这里找不到任何输入。有谁知道如何让它再次工作?
最佳答案
尝试将应用程序部署到三个已连接设备中的第三个时出现相同的错误。
我所要做的就是退出 XCode 并重新启动它,然后它又可以正常工作了。
关于ios - 代码 : Could not launch "APP_X_Y" - 'A' packet returned an error: -1,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/14731412/
Packet packet = new Packet(); while(packet != null ) { packet = jpcap.get
我有一个 python 脚本,它使用 dpkt 捕获以太网上的数据包,但我如何区分哪些数据包是 tcp,哪些是 udp。 最终,我希望获得在时间间隔内建立的每个 tcp 连接的数据包列表。 我的代码是
当我尝试将电缆与网络摄像头连接时,系统提示电缆无法连接到该端口。有人能帮我拿一下这个吗?
我正在尝试为 IPv6 建立 TCP 握手。 SYN 数据包被发送。接口(interface)收到SYN/ACK。 我对收到的数据包进行了十六进制转储,还对 pkt.show() 进行了处理。我得到以
我正在尝试使用套接字发送数据包,但出现错误。 invalid conversion from ‘omnetpp::cPacket*’ to ‘inet::Packet*’ [-fpermissive]
我在我的 Android 应用程序中使用 aSmack 与我的 XMPP 服务器通信,我打开了 Smack 的调试,这样我就可以看到所有 XML 的来来去去。我的问题是我正在使用 PacketList
自从升级到 Xcode 4.2 以来,我经常遇到错误,尝试调试应用程序失败,并显示消息“未知数据包回复:环境数据包“超时”。”重新启动设备并不能始终解决问题(尽管有时可以解决),重新启动 Xcode
我得到了一个派生自 sf::Packet 的类,它在其构造函数中传递了一个引用 iots 类型的 Integer。现在在构造函数中,我尝试将 Integer 添加到 sf::Packet 的数据中,如
我正在使用 Debian 操作系统。我正在编写网络仿真程序,我想获取所有数据包并停止 Debian从响应任何发送的数据包。 到目前为止,我已经打开了一个套接字,并且收到了所有数据包,但 Debian
对于一个应用程序,我需要能够创建一个多用户聊天室并加入其中。聊天服务器是一个 openfire 服务器。 我曾经有过: MultiUserChat chat = new MultiUserChat(c
我正在研究 中的核心音频转换服务 Learning Core Audio 我对他们 sample code 中的这个例子感到震惊: while(1) { // wrap the destina
我在my.cnf中添加了如下内容 [mysqld] max_allowed_packet=32M [mysql] max_allowed_packet=32M 而且我还在 JDBC 查询中添加了以下内
我需要测试 FTP 应用程序的数据包丢失情况。我用了Wireshark数据包嗅探器,我得到了 TCP 流。 如何使用 Wireshark 查找丢包情况? 最佳答案 数据包丢失和其他相关指标(例如误码率
每个人。这就是我们的门记录系统 Falco。当员工在读卡器上刷他/她的 ID 时,信号会传送到 Falco 服务器并将数据(卡 ID、时间)输入数据库。 Falco 的报告真的没有帮助,所以我们的人力
我正在研究 iSCSI 协议(protocol),现在我处于使用 Wireshark 捕获要查看的数据包的阶段,哪些数据包用于维护事件 session ,以及当我将文件复制到我的逻辑卷时,哪些数据包被
我无法理解网络上的任何人如何使用数据包嗅探器。 我对网络的工作原理知之甚少,但让我这样说吧:假设 postman 过来把包裹送到我家门口。为什么我可以翻遍他的所有其他包裹并环顾四周? postman
我已经看到(通过实际读取 tun 设备)Linux 上的 tun 驱动程序可以在一次读取中返回多个 IP 数据包。反之亦然 - 您可以在一次写入 tun 设备中写入多个 IP 数据包吗? 最佳答案 实
这个问题确实集中在我的问题上,与我在该主题上找到的任何其他问题无关。 PSA:当我说“数据包”时,我的意思是在单个 socket.recv(maxsize) 中接收到的完整字符串 我在 Java(我的
我想提高数据包传输性能。在此之前我使用原始套接字,现在我研究 packet_mmap。我有数据包(帧),我已经从另一台 PC 的内核模块中捕获了这些数据包(帧),并将其放入当前 PC,现在我想通过以下
我正在尝试使用带有一些标志的 tshark,并为每个过滤的跟踪获取时间戳。我正在使用它来过滤系统中的所有 DNS 查询。我无法获得时间戳以及过滤器工作。例如,如果我尝试类似 tshark -t ad
我是一名优秀的程序员,十分优秀!