- xml - AJAX/Jquery XML 解析
- 具有多重继承的 XML 模式
- .net - 枚举序列化 Json 与 XML
- XML 简单类型、简单内容、复杂类型、复杂内容
我正在尝试执行 passenger-install-apache2-module
但它不起作用。
我的命令结果:
$ passenger-install-apache2-module
Welcome to the Phusion Passenger Apache 2 module installer, v4.0.24.
This installer will guide you through the entire installation process. It
shouldn't take more than 3 minutes in total.
Here's what you can expect from the installation process:
1. The Apache 2 module will be installed for you.
2. You'll learn how to configure Apache.
3. You'll learn how to deploy a Ruby on Rails application.
Don't worry if anything goes wrong. This installer will advise you on how to
solve any problems.
Press Enter to continue, or Ctrl-C to abort.
--------------------------------------------
Checking for required software...
* Checking for C compiler...
Found: yes
Location: /usr/bin/gcc
* Checking for C++ compiler...
Found: yes
Location: /usr/bin/g++
* Checking for Curl development headers with SSL support...
Found: no
Error: Cannot find the `curl-config` command.
* Checking for OpenSSL development headers...
Found: yes
Location: /usr/include/openssl/ssl.h
* Checking for Zlib development headers...
Found: yes
Location: /usr/include/zlib.h
* Checking for Ruby development headers...
Found: yes
Location: /home/hemant/.rbenv/versions/2.0.0-p247/include/ruby-2.0.0/ruby.h
* Checking for OpenSSL support for Ruby...
Found: yes
* Checking for RubyGems...
Found: yes
* Checking for Rake (associated with /home/hemant/.rbenv/versions/2.0.0-p247/bin/ruby)...
Found: yes
Location: /home/hemant/.rbenv/versions/2.0.0-p247/bin/ruby /home/hemant/.rbenv/versions/2.0.0-p247/bin/rake
* Checking for rack...
Found: yes
* Checking for Apache 2...
Found: no
* Checking for Apache 2 development headers...
Found: no
* Checking for Apache Portable Runtime (APR) development headers...
Found: no
* Checking for Apache Portable Runtime Utility (APU) development headers...
Found: no
Some required software is not installed.
But don't worry, this installer will tell you how to install them.
Press Enter to continue, or Ctrl-C to abort.
--------------------------------------------
Installation instructions for required software
* To install Curl development headers with SSL support:
Please run apt-get install libcurl4-openssl-dev or libcurl4-gnutls-dev, whichever you prefer.
* To install Apache 2:
Please install it with apt-get install apache2-mpm-worker
* To install Apache 2 development headers:
Please install it with apt-get install apache2-threaded-dev
* To install Apache Portable Runtime (APR) development headers:
Please install it with apt-get install libapr1-dev
* To install Apache Portable Runtime Utility (APU) development headers:
Please install it with apt-get install libaprutil1-dev
If the aforementioned instructions didn't solve your problem, then please take
a look at the Users Guide:
/home/hemant/.rbenv/versions/2.0.0-p247/lib/ruby/gems/2.0.0/gems/passenger-4.0.24/doc/Users guide Apache.html
http://www.modrails.com/documentation/Users%20guide%20Apache.html
然后我尝试运行 apt-get install libcurl4-openssl-dev
。
$ sudo apt-get install libcurl4-openssl-dev
[sudo] password for hemant:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libcurl4-openssl-dev : Depends: libcurl3 (= 7.29.0-1ubuntu3.1) but 7.29.0-1ubuntu3.2 is to be installed
Depends: libldap2-dev but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
这是我的系统版本。
$ ruby -v
ruby 2.0.0p247 (2013-06-27 revision 41674) [i686-linux]
$ gem -v
2.1.11
rvm -v
rvm 1.23.16 (master) by Wayne E. Seguin <wayneeseguin@gmail.com>, Michal Papis <mpapis@gmail.com> [https://rvm.io/]
$ rails -v
Rails 4.0.1.rc4
$ bundle -v
Bundler version 1.3.5
谁能帮我解决这个问题? :(
另外,我遇到了这个问题! :(
$ require_relative '../spec_helper'
WARNING:root:could not open file '/etc/apt/sources.list.d/passenger.list'
require_relative: command not found
最佳答案
根据你的日志,似乎没有安装Apache2。
* 正在检查 Apache 2...
发现:没有
如果是,你能提供它的版本吗?
关于ruby-on-rails - passenger-install-apache2-module 在 ruby 2.0.0 中不工作,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/20056645/
我有 4 个文件。 C:\perlCode2\start.pl6 C:\perlCode2\file0.pm6 C:\perlCode2\folder1\file1.pm6 C:\perlCode2\
我有一个结构如下的模块: /module __init__.py /submod_1 __init__.py submod_1_class.py
我的源代码在 java 7 上编译并在 java 11 上运行。 我正在尝试将 imperva RASP 作为 java 代理集成到 tomcat 中。但是,当我启动 tomcat 服务器时,它抛出以
justExport.js const first = () => { console.log('frist from justExport') } const second = () => {
以下模块用JS文件编写: module.exports = { propA: 1, propB: 2 } 允许稍后从模块导入属性,如:从“路径/到/模块”导入 { propA} 然而,将文件格
我一直在尝试在嵌套的惰性加载模块中实现ngx翻译,但一直未能如愿。我面临的唯一问题是,每当我通过选择器更改语言时,嵌套延迟加载模块中的语言都不会更改。 HttpLoader 工作正常,其他一切工作正常
我没有可重复的示例,因为问题更多是关于模块如何工作。我试图了解如何将一些 react 功能从一个模块传递到下一个模块。过去我收到过有关使用 ObserveEvent 的回复,但是当我在一个模块中使用响
我正在阅读Wikipedia's definition of Dependency inversion principle ,它使用了两个术语高级模块和低级模块,我无法弄清楚。 它们是什么以及依赖倒置
问题 我遇到的一个问题是将两个模块的类型和值带入一个新的组合模块中。我举个例子。目前我有以下两种类型签名 module type Ordered = sig type t (* the type
我是 JavaScript 的新手,最近一直在努力处理导入问题。有一件事我无法理解。 在较旧的节点模块(主要是那些在 ES6 之前出现的模块)中,可以使用 npm 安装,例如 express,通常没有
我正在尝试使用 System.JS 将 material-ui 导入我的 React 应用 在我的应用中,我这样做: import {AppBar, Tabs, Tab, Card, CardTitl
我想使用功能module->exports查找模块提供的所有导出。不幸的是,传递给该函数的模块必须在当前命名空间中声明,然后才能在其上使用该函数。当我静态地知道模块是什么时,这没问题,我只需要将其引入
目录结构如下 outdir |--lib |--- __init__.py |--- abc.py |--indir
这与提到的非常相似 here但是评论或回答中提供的每个解决方案都没有解决我的问题。想看看是否还有其他我应该看的东西。我尝试了不同的路径,比如 ./app/mycomponent/mycomponent
我有两个 Angular 模块:main 和 feature: 主/根模块: @NgModule({ imports: [ StoreModule.forRoot({route
我尝试在 Ubuntu 04.12 LTS x64 中安装“Userful MultiSeat-X64-5.0.1 ...”,在安装结束时遇到以下错误: File "", line 6, in Im
我正在尝试优化我的 vendor bundle.js,因为它已经膨胀并且我正在使用 material-ui 库。 import Card from 'material-ui'; // Very bad
错误: Import-Module : The specified module 'msonline' was not loaded because no valid module file was
我在 Server 2008 SP2(64 位)上执行导入模块 ActiveDirectory 时遇到问题。 NET Framework 3.5 SP1 已安装 我下载了 Windows6.0-KB9
嗯,你好! 我正在编写一个脚本来获取 Sql 作业历史记录,并且需要使用“SqlServer”模块。它已安装,但由于上面的错误消息,我无法导入它。当我到达模块路径时,文件夹“SqlServer”存在并
我是一名优秀的程序员,十分优秀!