c# - 在 C# 中确定字符串的编码

Question

在 C# 中有什么方法可以确定字符串的编码？

比如说，我有一个文件名字符串，但我不知道它是用 Unicode UTF-16 还是系统默认编码编码的，我怎么知道？

Answer 1

下面的代码具有以下特点:

1. 检测或尝试检测 UTF-7、UTF-8/16/32(bom、no bom、little & big endian)
2. 如果未找到 Unicode 编码，则回退到本地默认代码页。
3. 检测(很有可能)缺少 BOM/签名的 unicode 文件
4. 在文件中搜索 charset=xyz 和 encoding=xyz 以帮助确定编码。
5. 为了节省处理时间，您可以“品尝”文件(可定义的字节数)。
6. 返回编码和解码后的文本文件。
7. 纯基于字节的效率解决方案

正如其他人所说，没有任何解决方案是完美的(当然也不能轻易区分世界范围内使用的各种 8 位扩展 ASCII 编码)，但我们可以“足够好”，特别是如果开发人员还提供向用户提供替代编码列表，如下所示:What is the most common encoding of each language?

可以使用 Encoding.GetEncodings();

找到完整的编码列表

// Function to detect the encoding for UTF-7, UTF-8/16/32 (bom, no bom, little
// & big endian), and local default codepage, and potentially other codepages.
// 'taster' = number of bytes to check of the file (to save processing). Higher
// value is slower, but more reliable (especially UTF-8 with special characters
// later on may appear to be ASCII initially). If taster = 0, then taster
// becomes the length of the file (for maximum reliability). 'text' is simply
// the string with the discovered encoding applied to the file.
public Encoding detectTextEncoding(string filename, out String text, int taster = 1000)
{
    byte[] b = File.ReadAllBytes(filename);

    //////////////// First check the low hanging fruit by checking if a
    //////////////// BOM/signature exists (sourced from http://www.unicode.org/faq/utf_bom.html#bom4)
    if (b.Length >= 4 && b[0] == 0x00 && b[1] == 0x00 && b[2] == 0xFE && b[3] == 0xFF) { text = Encoding.GetEncoding("utf-32BE").GetString(b, 4, b.Length - 4); return Encoding.GetEncoding("utf-32BE"); }  // UTF-32, big-endian 
    else if (b.Length >= 4 && b[0] == 0xFF && b[1] == 0xFE && b[2] == 0x00 && b[3] == 0x00) { text = Encoding.UTF32.GetString(b, 4, b.Length - 4); return Encoding.UTF32; }    // UTF-32, little-endian
    else if (b.Length >= 2 && b[0] == 0xFE && b[1] == 0xFF) { text = Encoding.BigEndianUnicode.GetString(b, 2, b.Length - 2); return Encoding.BigEndianUnicode; }     // UTF-16, big-endian
    else if (b.Length >= 2 && b[0] == 0xFF && b[1] == 0xFE) { text = Encoding.Unicode.GetString(b, 2, b.Length - 2); return Encoding.Unicode; }              // UTF-16, little-endian
    else if (b.Length >= 3 && b[0] == 0xEF && b[1] == 0xBB && b[2] == 0xBF) { text = Encoding.UTF8.GetString(b, 3, b.Length - 3); return Encoding.UTF8; } // UTF-8
    else if (b.Length >= 3 && b[0] == 0x2b && b[1] == 0x2f && b[2] == 0x76) { text = Encoding.UTF7.GetString(b,3,b.Length-3); return Encoding.UTF7; } // UTF-7

        
    //////////// If the code reaches here, no BOM/signature was found, so now
    //////////// we need to 'taste' the file to see if can manually discover
    //////////// the encoding. A high taster value is desired for UTF-8
    if (taster == 0 || taster > b.Length) taster = b.Length;    // Taster size can't be bigger than the filesize obviously.


    // Some text files are encoded in UTF8, but have no BOM/signature. Hence
    // the below manually checks for a UTF8 pattern. This code is based off
    // the top answer at: https://stackoverflow.com/questions/6555015/check-for-invalid-utf8
    // For our purposes, an unnecessarily strict (and terser/slower)
    // implementation is shown at: https://stackoverflow.com/questions/1031645/how-to-detect-utf-8-in-plain-c
    // For the below, false positives should be exceedingly rare (and would
    // be either slightly malformed UTF-8 (which would suit our purposes
    // anyway) or 8-bit extended ASCII/UTF-16/32 at a vanishingly long shot).
    int i = 0;
    bool utf8 = false;
    while (i < taster - 4)
    {
        if (b[i] <= 0x7F) { i += 1; continue; }     // If all characters are below 0x80, then it is valid UTF8, but UTF8 is not 'required' (and therefore the text is more desirable to be treated as the default codepage of the computer). Hence, there's no "utf8 = true;" code unlike the next three checks.
        if (b[i] >= 0xC2 && b[i] < 0xE0 && b[i + 1] >= 0x80 && b[i + 1] < 0xC0) { i += 2; utf8 = true; continue; }
        if (b[i] >= 0xE0 && b[i] < 0xF0 && b[i + 1] >= 0x80 && b[i + 1] < 0xC0 && b[i + 2] >= 0x80 && b[i + 2] < 0xC0) { i += 3; utf8 = true; continue; }
        if (b[i] >= 0xF0 && b[i] < 0xF5 && b[i + 1] >= 0x80 && b[i + 1] < 0xC0 && b[i + 2] >= 0x80 && b[i + 2] < 0xC0 && b[i + 3] >= 0x80 && b[i + 3] < 0xC0) { i += 4; utf8 = true; continue; }
        utf8 = false; break;
    }
    if (utf8 == true) {
        text = Encoding.UTF8.GetString(b);
        return Encoding.UTF8;
    }


    // The next check is a heuristic attempt to detect UTF-16 without a BOM.
    // We simply look for zeroes in odd or even byte places, and if a certain
    // threshold is reached, the code is 'probably' UF-16.          
    double threshold = 0.1; // proportion of chars step 2 which must be zeroed to be diagnosed as utf-16. 0.1 = 10%
    int count = 0;
    for (int n = 0; n < taster; n += 2) if (b[n] == 0) count++;
    if (((double)count) / taster > threshold) { text = Encoding.BigEndianUnicode.GetString(b); return Encoding.BigEndianUnicode; }
    count = 0;
    for (int n = 1; n < taster; n += 2) if (b[n] == 0) count++;
    if (((double)count) / taster > threshold) { text = Encoding.Unicode.GetString(b); return Encoding.Unicode; } // (little-endian)


    // Finally, a long shot - let's see if we can find "charset=xyz" or
    // "encoding=xyz" to identify the encoding:
    for (int n = 0; n < taster-9; n++)
    {
        if (
            ((b[n + 0] == 'c' || b[n + 0] == 'C') && (b[n + 1] == 'h' || b[n + 1] == 'H') && (b[n + 2] == 'a' || b[n + 2] == 'A') && (b[n + 3] == 'r' || b[n + 3] == 'R') && (b[n + 4] == 's' || b[n + 4] == 'S') && (b[n + 5] == 'e' || b[n + 5] == 'E') && (b[n + 6] == 't' || b[n + 6] == 'T') && (b[n + 7] == '=')) ||
            ((b[n + 0] == 'e' || b[n + 0] == 'E') && (b[n + 1] == 'n' || b[n + 1] == 'N') && (b[n + 2] == 'c' || b[n + 2] == 'C') && (b[n + 3] == 'o' || b[n + 3] == 'O') && (b[n + 4] == 'd' || b[n + 4] == 'D') && (b[n + 5] == 'i' || b[n + 5] == 'I') && (b[n + 6] == 'n' || b[n + 6] == 'N') && (b[n + 7] == 'g' || b[n + 7] == 'G') && (b[n + 8] == '='))
            )
        {
            if (b[n + 0] == 'c' || b[n + 0] == 'C') n += 8; else n += 9;
            if (b[n] == '"' || b[n] == '\'') n++;
            int oldn = n;
            while (n < taster && (b[n] == '_' || b[n] == '-' || (b[n] >= '0' && b[n] <= '9') || (b[n] >= 'a' && b[n] <= 'z') || (b[n] >= 'A' && b[n] <= 'Z')))
            { n++; }
            byte[] nb = new byte[n-oldn];
            Array.Copy(b, oldn, nb, 0, n-oldn);
            try {
                string internalEnc = Encoding.ASCII.GetString(nb);
                text = Encoding.GetEncoding(internalEnc).GetString(b);
                return Encoding.GetEncoding(internalEnc);
            }
            catch { break; }    // If C# doesn't recognize the name of the encoding, break.
        }
    }


    // If all else fails, the encoding is probably (though certainly not
    // definitely) the user's local codepage! One might present to the user a
    // list of alternative encodings as shown here: https://stackoverflow.com/questions/8509339/what-is-the-most-common-encoding-of-each-language
    // A full list can be found using Encoding.GetEncodings();
    text = Encoding.Default.GetString(b);
    return Encoding.Default;
}