- r - 以节省内存的方式增长 data.frame
- ruby-on-rails - ruby/ruby on rails 内存泄漏检测
- android - 无法解析导入android.support.v7.app
- UNIX 域套接字与共享内存(映射文件)
我在使用 C 中的管道时遇到了严重的问题。我应该从命令行接收参数(例如:./myprogram 123 45 67),一次将参数一个字符读入缓冲区,然后发送将字符数传给子进程进行统计,然后将读取到的字符总数返回给父进程。我的代码如下(注意:注释是我应该做的):
// Characters from command line arguments are sent to child process
// from parent process one at a time through pipe.
// Child process counts number of characters sent through pipe.
// Child process returns number of characters counted to parent process.
// Parent process prints number of characters counted by child process.
#include <stdio.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <signal.h>
static int toChild[2];
static int fromChild[2];
static char buffer;
int main(int argc, char **argv)
{
int status;
int nChars = 0;
pid_t pid;
pipe(toChild);
pipe(fromChild);
if ((pid = fork()) == -1) {
printf("fork error %d\n", pid);
return -1;
}
else if (pid == 0) {
close(toChild[1]);
close(fromChild[0]);
// Receive characters from parent process via pipe
// one at a time, and count them.
int count = 0;
printf("child about to read\n");
while(read(toChild[0], &buffer, 1)){
count++;
}
// Return number of characters counted to parent process.
write(fromChild[1], &count, sizeof(count));
close(toChild[0]);
close(fromChild[1]);
printf("child exits\n");
}
else {
close(toChild[0]);
close(fromChild[1]);
// -- running in parent process --
printf("CS201 - Assignment 3 - Chris Gavette\n");
write(toChild[1], &argv[1], 1);
// Send characters from command line arguments starting with
// argv[1] one at a time through pipe to child process.
read(fromChild[0], &nChars, 1);
// Wait for child process to return. Reap child process.
// Receive number of characters counted via the value
// returned when the child process is reaped.
close(toChild[1]);
close(fromChild[0]);
waitpid(pid, &status, 0);
printf("child counted %d chars\n", nChars);
printf("parent exits\n");
return 0;
}
}
即使我关闭了两个管道的两端,子进程似乎也挂起了。
最佳答案
对于初学者来说,这是错误的。
write(toChild[1], &count, 1)
它最终会导致你的问题。 count
是一个 int
,而不是 char
或 unsigned char
。您需要发送 sizeof(count)
。此外,读取函数在遇到错误 时将返回非零的 EOF,因此您的子退出条件不合适。它应该看起来像这样:
while(read(toChild[0], &buffer, 1) == 1)
最后,您的父进程应该循环遍历 argv[]
中的每个参数,将每个参数作为 strlen
大小的缓冲区发送。
我几乎可以肯定这就是您想要做的。请注意,为了在了解哪个描述符用于特定目的时保持理智,我更喜欢使用 #define
来记录每个进程用于读取和写入的内容。这可以扩展到任意数量的进程,顺便说一句,我相信这对于你的下一个任务来说不会太远:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <signal.h>
// P0_READ - parent read source
// P0_WRITE - parent write target
// P1_READ - child read source
// P1_WRITE - child write target
#define P0_READ 0
#define P1_WRITE 1
#define P1_READ 2
#define P0_WRITE 3
#define N_PIPES 4
int main(int argc, char **argv)
{
int fd[N_PIPES], count = 0, i;
pid_t pid;
char c;
if (pipe(fd) || pipe(fd+2))
{
perror("Failed to open pipe(s)");
return EXIT_FAILURE;
}
// fork child process
if ((pid = fork()) == -1)
{
perror("Failed to fork child process");
return EXIT_FAILURE;
}
// child process
if (pid == 0)
{
// close non P1 descriptors
close(fd[P0_READ]);
close(fd[P0_WRITE]);
// get chars from input pipe, counting each one.
while(read(fd[P1_READ], &c, 1) == 1)
count++;
printf("Child: count = %d\n", count);
write(fd[P1_WRITE], &count, sizeof(count));
// close remaining descriptors
close(fd[P1_READ]);
close(fd[P1_WRITE]);
return EXIT_SUCCESS;
}
// parent process. start by closing unused descriptors
close(fd[P1_READ]);
close(fd[P1_WRITE]);
// send each arg
for (i=1; i<argc; ++i)
write(fd[P0_WRITE], argv[i], strlen(argv[i]));
// finished sending args
close(fd[P0_WRITE]);
// Wait for child process to return.
wait(NULL);
// wait for total count
if (read(fd[P0_READ], &count, sizeof(count)) == sizeof(count))
printf("Parent: count = %d\n", count);
// close last descriptor
close(fd[P0_READ]);
return 0;
}
输入
./progname argOne argTwo
输出
Child: count = 12
Parent: count = 12
编辑:具有子返回状态的单管道
从原始问题的评论看来,您的作业可能要求获取 child 进程的返回状态作为结果计数,而不是将其返回到管道中。这样做时,您可以使用单个管道描述符对来完成此操作。我更喜欢第一种方法,但这也适用:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <signal.h>
// P0_WRITE - parent write target
// P1_READ - child read source
#define P1_READ 0
#define P0_WRITE 1
#define N_PIPES 2
int main(int argc, char **argv)
{
int fd[N_PIPES], count = 0;
pid_t pid;
char c;
if (pipe(fd))
{
perror("Failed to open pipe(s)");
return EXIT_FAILURE;
}
// fork child process
pid = fork();
if (pid == -1)
{
perror("Failed to fork child process");
return EXIT_FAILURE;
}
if (pid == 0)
{
// close non P1 descriptors
close(fd[P0_WRITE]);
// Return number of characters counted to parent process.
while(read(fd[P1_READ], &c, 1) == 1)
++count;
close(fd[P1_READ]);
printf("Child: count = %d\n", count);
return count;
}
// parent process. start by closing unused descriptors
close(fd[P1_READ]);
// eacn each arg entirely
for (int i=1; i<argc; ++i)
write(fd[P0_WRITE], argv[i], strlen(argv[i]));
// finished sending args
close(fd[P0_WRITE]);
// Wait for child process to return.
if (wait(&count) == -1)
{
perror("Failed to wait for child process");
return EXIT_FAILURE;
}
printf("Parent: count = %d\n", WEXITSTATUS(count));
return 0;
}
结果是一样的,但请注意,这是一种偏向于调试的方式,因为大多数调试器会在您的子进程上发出信号跳闸,并且真正的退出状态会丢失。例如,在我的 Mac 上,在 Xcode 行程下运行:
Failed to wait for child process: Interrupted system call
从命令行运行时给出:
Child: count = 12
Parent: count = 12
我更喜欢双管道方法的众多原因之一。
关于c - 在 Unix C 中使用管道,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/23987259/
#include using namespace std; class C{ private: int value; public: C(){ value = 0;
这个问题已经有答案了: What is the difference between char a[] = ?string?; and char *p = ?string?;? (8 个回答) 已关闭
关闭。此题需要details or clarity 。目前不接受答案。 想要改进这个问题吗?通过 editing this post 添加详细信息并澄清问题. 已关闭 7 年前。 此帖子已于 8 个月
除了调试之外,是否有任何针对 c、c++ 或 c# 的测试工具,其工作原理类似于将独立函数复制粘贴到某个文本框,然后在其他文本框中输入参数? 最佳答案 也许您会考虑单元测试。我推荐你谷歌测试和谷歌模拟
我想在第二台显示器中移动一个窗口 (HWND)。问题是我尝试了很多方法,例如将分辨率加倍或输入负值,但它永远无法将窗口放在我的第二台显示器上。 关于如何在 C/C++/c# 中执行此操作的任何线索 最
我正在寻找 C/C++/C## 中不同类型 DES 的现有实现。我的运行平台是Windows XP/Vista/7。 我正在尝试编写一个 C# 程序,它将使用 DES 算法进行加密和解密。我需要一些实
很难说出这里要问什么。这个问题模棱两可、含糊不清、不完整、过于宽泛或夸夸其谈,无法以目前的形式得到合理的回答。如需帮助澄清此问题以便重新打开,visit the help center . 关闭 1
有没有办法强制将另一个 窗口置于顶部? 不是应用程序的窗口,而是另一个已经在系统上运行的窗口。 (Windows, C/C++/C#) 最佳答案 SetWindowPos(that_window_ha
假设您可以在 C/C++ 或 Csharp 之间做出选择,并且您打算在 Windows 和 Linux 服务器上运行同一服务器的多个实例,那么构建套接字服务器应用程序的最明智选择是什么? 最佳答案 如
你们能告诉我它们之间的区别吗? 顺便问一下,有什么叫C++库或C库的吗? 最佳答案 C++ 标准库 和 C 标准库 是 C++ 和 C 标准定义的库,提供给 C++ 和 C 程序使用。那是那些词的共同
下面的测试代码,我将输出信息放在注释中。我使用的是 gcc 4.8.5 和 Centos 7.2。 #include #include class C { public:
很难说出这里问的是什么。这个问题是含糊的、模糊的、不完整的、过于宽泛的或修辞性的,无法以目前的形式得到合理的回答。如需帮助澄清此问题以便重新打开它,visit the help center 。 已关
我的客户将使用名为 annoucement 的结构/类与客户通信。我想我会用 C++ 编写服务器。会有很多不同的类继承annoucement。我的问题是通过网络将这些类发送给客户端 我想也许我应该使用
我在 C# 中有以下函数: public Matrix ConcatDescriptors(IList> descriptors) { int cols = descriptors[0].Co
我有一个项目要编写一个函数来对某些数据执行某些操作。我可以用 C/C++ 编写代码,但我不想与雇主共享该函数的代码。相反,我只想让他有权在他自己的代码中调用该函数。是否可以?我想到了这两种方法 - 在
我使用的是编写糟糕的第 3 方 (C/C++) Api。我从托管代码(C++/CLI)中使用它。有时会出现“访问冲突错误”。这使整个应用程序崩溃。我知道我无法处理这些错误[如果指针访问非法内存位置等,
关闭。这个问题不符合Stack Overflow guidelines .它目前不接受答案。 我们不允许提问寻求书籍、工具、软件库等的推荐。您可以编辑问题,以便用事实和引用来回答。 关闭 7 年前。
已关闭。此问题不符合Stack Overflow guidelines 。目前不接受答案。 要求我们推荐或查找工具、库或最喜欢的场外资源的问题对于 Stack Overflow 来说是偏离主题的,因为
我有一些 C 代码,将使用 P/Invoke 从 C# 调用。我正在尝试为这个 C 函数定义一个 C# 等效项。 SomeData* DoSomething(); struct SomeData {
这个问题已经有答案了: Why are these constructs using pre and post-increment undefined behavior? (14 个回答) 已关闭 6
我是一名优秀的程序员,十分优秀!